Castle nut
BCM Receiver Extension Nut (Castle Nut)
The nut on the receiver extension's thread that is turned down onto the end plate and locks the extension to the lower receiver; its notches take the wrench. BCM: "To secure lock plate on an adjustable stock for AR15, M4".

- Weight
- 0.7 oz ± 0.07 oz Provisionalworked out: (0.785398163 * ({.od} * {.od} - {std.receiver_extension.thread_major_d} * {std.receiver_extension.thread_major_d}) * {.thickness} - {.notches} * {.notch_width} * {.notch_depth} * ({.od} - {std.receiver_extension.thread_major_d}) / 2) * {std.density.steel}
- Lowest price
- $7.00 at BCM, read Nov 21, 2026
- Maker's number
- CASTLE-NUT-AR15
- Colour
- Manganese phosphate, charcoal
- Drawn as
- modelled
- Maker's page
- bravocompanyusa.com
In “22RB .22 LR rifle”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Castle nut rear face behind takedown pin1.668 in 42.4 mmConflictWorked out: {bad-workhorse-lower.rear_behind_pin} + {bcm-end-plate.thickness} + {.thickness}
Photo “about 1.74 in”
not recorded in brief, from the project brief
Scale: not recorded in brief. Read by calibrated photo measurement
Worked out 1.668 in used
{bad-workhorse-lower.rear_behind_pin} + {bcm-end-plate.thickness} + {.thickness}, from the site owner
The receiver's rear face (the Army's drawing, M6), plus the end plate and castle nut stacked behind it (thicknesses measured on an Aero lower). Until M6 the stack stood on the Workhorse's photo-read ring, 0.037 further back.
Built from the standard's rear face and measured hardware. The brief's 1.74 (photo not archived) is 0.07 more; Magpul's whole-rifle photo of an M4 with their stock (a copy on file, rail-scaled) reads 1.67.
photo and stack differ by 0.072 in beyond what each states it is good to.
Castle nut OD1.375 in 34.9 mmConflictPublished: Strike Industries anti-rotation castle nut (not BCM), the maker, read Sep 30, 2026
Photo 1.32 in ± 0.03 in
Aero Precision M4E1 complete lower with MOE SL, straight right side, 2000 px; supplied in chat, from the site owner
Scale: pin frame: takedown, pivot, trigger, hammer, selector (Hough-refined), 130.6 px/in, rms 0.022 in. Read by castle nut silhouette height, x −1.55 to −1.16 (the nut's notches are on its rear face, not its outline)
Aero's kit nut. Read at a scale 2.5% too large (2026-10-05: the same five features fit the Army drawing's positions at 127.4 px/in, rms 0.003 in): the silhouette is 173 px tall, 1.36 in at the pins' scale and up to 1.38 at the tube's own, which is the other makers' nuts.
Published “Width: 34.92mm Height: 10.5mm” used
Strike Industries anti-rotation castle nut (not BCM), the maker, read Sep 30, 2026 the page, harvested Sep 30, 2026
The page doesn't define its axes; the width reads as the OD.
Published “Length: 1.375"”
Shooting Sports Supplies, (3317) AR15 mil-spec/commercial castle nut (not BCM), a seller, read Sep 30, 2026 the page, harvested Sep 30, 2026
Axis unlabeled; the same size as Strike's width.
Published “Castle nut OD: 1.36"”
M4Carbine.net, CHoffman (Stag mil-spec nut, micrometer), a forum, read Sep 30, 2026 the page, harvested Sep 30, 2026
Hand measurement, nearest hundredth; the poster notes nuts vary by maker.
Model 1.363 in ± 0.001 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by one cylinder, r 0.6815
A mil-spec nut as the reference model has it (2026-10-12): the forum's micrometer reading to the hundredth, 0.012 under the figure adopted.
A manufacturer figure for a mil-spec nut; the retailer listing matches it. The forum micrometer reading of a third brand is 0.015 in smaller.
photo and strike differ by 0.055 in beyond what each states it is good to.
photo and retail-3317 differ by 0.055 in beyond what each states it is good to.
photo and forum differ by 0.04 in beyond what each states it is good to.
photo and model differ by 0.043 in beyond what each states it is good to.
strike and forum differ by 0.015 in beyond what each states it is good to.
strike and model differ by 0.012 in beyond what each states it is good to.
retail-3317 and forum differ by 0.015 in beyond what each states it is good to.
retail-3317 and model differ by 0.012 in beyond what each states it is good to.
BCM publishes no castle-nut dimensions. These are other brands' mil-spec nuts, which are interchangeable parts, so the BCM nut's OD stays unconfirmed.
Castle nut thickness0.413 in 10.5 mmConflictPublished: Strike Industries anti-rotation castle nut (not BCM), the maker, read Sep 30, 2026
Published “Height: 10.5mm” used
Strike Industries anti-rotation castle nut (not BCM), the maker, read Sep 30, 2026 the page, harvested Sep 30, 2026
Axis undefined; read as the thickness along the tube. A different brand and design (anti-rotation).
Photo 0.39 in ± 0.03 in
Aero Precision M4E1 complete lower with MOE SL, straight right side, 2000 px; supplied in chat, from the site owner
Scale: pin frame: takedown, pivot, trigger, hammer, selector (Hough-refined), 130.6 px/in, rms 0.022 in. Read by castle nut silhouette length along the tube, x −1.553 to −1.16
Read at a scale 2.5% too large, and to an edge inside the end plate (2026-10-05): on a 6x crop the nut runs from column 949 to 995.5, 46.5 px, which is 0.37 ± 0.02 in at the tube's own scale (125 ± 2 px/in; the pins' is 127.4).
Model 0.3765 in ± 0.001 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by its front face to its rear face, planes y 0 and y 0.3765
A mil-spec nut as the reference model has it (2026-10-12): it and the photo's reading at its true scale (0.37 ± 0.02) are two sources 0.04 under the figure adopted, which is another design's. Still not changed: three stocks' seats are checked against the nut's rear face, and they want checking again with it.
A manufacturer's figure, for another maker's nut of another design. The user's photo of Aero's nut was taken to agree within its ±; read again at its true scale (2026-10-05) it is 0.37 ± 0.02 in, 0.04 less: the kit's nut may be drawn that much too long, its rear face that much too far back. Not changed here: the nut's rear face is what three stocks' seats are checked against.
strike and model differ by 0.037 in beyond what each states it is good to.
BCM publishes none.
Castle nut wrench notch width0.16 in ± 0.005 in 4.1 mmCorroboratedPublished: M4Carbine.net, CHoffman (Stag mil-spec nut, micrometer, 'approximate and to the nearest hundredth'), a forum, read Oct 1, 2026
Published “Nut Notch width: .16” used
M4Carbine.net, CHoffman (Stag mil-spec nut, micrometer, 'approximate and to the nearest hundredth'), a forum, read Oct 1, 2026 the page, harvested Oct 1, 2026
Model 0.162 in ± 0.001 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by a wrench notch's two side planes, ±0.0810
A micrometer on a real mil-spec nut; the reference model's nut has 0.162, the same within two thousandths.
BCM's nut has four wrench notches in its rear face, about 90° apart, cut through its wall (BCM's photo, a copy on file); a staking notch on the front face isn't drawn.
Castle nut wrench notch depth (into the rear face)0.11 in ± 0.02 in 2.8 mmConflictPublished: M4Carbine.net, CHoffman (Stag mil-spec nut, micrometer), a forum, read Oct 1, 2026
Published “Nut Notch depth: .11 (hard to get an accurate measurement when installed)” used
M4Carbine.net, CHoffman (Stag mil-spec nut, micrometer), a forum, read Oct 1, 2026 the page, harvested Oct 1, 2026
± widened for the poster's caveat.
Model 0.1375 in ± 0.001 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by a wrench notch's floor plane, y 0.2390 of 0.3765
0.0275 deeper than the forum's reading of an installed nut, just outside its ±.
A reading on a real nut, which its poster calls hard to take with the nut installed; the reference model's nut has its notches 0.1375 deep, 0.0275 more and just outside this figure's ±. Kept: the model is another nut.
forum and model differ by 0.028 in beyond what each states it is good to.
Castle nut wrench notches4ProvisionalPhoto: BCM castle nut, three-quarter view from above
Photo 4 count used
BCM castle nut, three-quarter view from above, harvested
Scale: none (a count). Read by counted on the rear face, about 90° apart
Castle nut staking notches, in its front face's outer edge3ProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 3 count used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by three notches 120 degrees apart, counted in the face list (planes #20197, #20323 and their like)
Castle nut staking notch, width0.09 in ± 0.002 in 2.3 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 0.09 in ± 0.002 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by a notch's two side planes, ±0.0450
Castle nut staking notch, depth into the front face0.082 in ± 0.002 in 2.1 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 0.082 in ± 0.002 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by a notch's floor
Castle nut staking notch, how far in from the outside it is cut0.075 in ± 0.002 in 1.9 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock
Model 0.075 in ± 0.002 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle with a carbine stock, from the site owner
Read by the notch's inner wall, a cylinder r 0.6065 of an outside r 0.6815
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
End plate, where the castle nut bears
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- BCM $7.00 Nov 21, 2026, in stock that day