Magazine
Black Dog Machine Sonic X 15-round .22 LR magazine
The Sonic X is Black Dog's sonic-welded X-Form (Bear Creek's listing names it so). The 10-round is the same body (Black Dog: 5 in and 3.2 oz for both), so its photos measure this part. The user is buying the 15-round (2026-09-30).

- Weight
- 3.2 oz Confirmedpublished: Black Dog Machine, the maker, read Sep 30, 2026Its sources span 3.15 oz to 3.25 oz.
- Lowest price
- $15.95 at AR15Discounts, read Nov 21, 2026 (Smoke)
- Made for
- AR15.22 "Sonic Weld" Magazine … Known-Compatible Models .22 Conversion Bolt Kits: BoreBuddy .22LR Ciener/Atchisson .22LR CMMG (Old Bolt Kit) .22LR
- Colours
- Smoke, Black
- Drawn as
- modelled
In “22RB .22 LR rifle”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Front to back2.514 in ± 0.012 in 63.9 mmCorroboratedPhoto: the user's own 10-round, the 15's body, lying on each side on tile, a tape on the floor beside it, from about 4 ft; 2026-10-03
Published “about 2.5 in”
Black Dog Machine, the maker, from the project brief
Black Dog's figure for its other AR mags, not this model.
Photo 2.559 in ± 0.07 in
Black Dog SMOKEANDBLACKCOLORS lineup, harvested
Scale: sibling in the same photo: smoke10 y-extent 314 px = 5.659 in (blackdog-22lr-15.overall_height, conflict). Read by x-extent of component smoke10 (ROI [340, 132, 482, 447], central band, sampling): 142 px; ± from 1.5 px edge error at both ends plus the reference ±
The x-extent in Black Dog's lineup (spine and base lip included), scaled by this magazine's traced height. M2 scaled it by 5 in and read 2.26.
Photo 2.51 in ± 0.16 in
Range Is Charm / Nordic Components: complete NC rifle, straight left side, smoke Black Dog seated; supplied in chat, from the site owner
Scale: top-rail slot period 7.373 px = 0.394 in (std.picatinny.slot_pitch), FFT over 360 px of rail: 18.71 px/in. Read by silhouette width 309–355 px (47 px) where the seated magazine stands clear of the lower (rows 208–220); ± is 1.5 px per translucent edge
Photo 2.46 in ± 0.06 in
complete rifle lying flat on its right side, photographed straight down; supplied in chat, from the site owner
Scale: pin frame: takedown, pivot, trigger pin and selector (Hough-refined), 49.18 px/in, rotation 1.43°, rms 0.03 in. Phone lens distortion compresses the far right of the frame (rail slots read 3.6% small at the handguard), so only readings near the pins are used. Read by magazine span between wood-coloured pixels on nine rows below the magwell (2.40–2.46; median 2.46), with the neutral-colour mask
Photo 2.514 in ± 0.012 in used
the user's own 10-round, the 15's body, lying on each side on tile, a tape on the floor beside it, from about 4 ft; 2026-10-03, from the site owner
Scale: the tape in each photo (170.4, 173.9 and 185.4 px/in, its 1/8 in ticks fitted to 0.11 px), brought up to the side face (0.87 in above the floor) by the lens's height: 48 to 52 in, found from lengths seen at two heights in the side and edge views (one focal length, 8940 px: 8250 to 9760), so a side face reads 1.5% large on the tape. Read by the spine rib's rear face to the front face, at the front's upper edge: 2.512, 2.518, 2.514 in the three photos; ± is the lens's height, the phone's tilt (0.25%) and the tape's own height
The user's own magazine beside a tape, three photos within 0.006. The seated flat-lay (2.46 ± 0.06), the Range Is Charm side view (2.51 ± 0.16) and the brief's 'about 2.5 in' agree within their ±. The lineup value is biased (M1b: lineup for height ratios only).
Body height below the feed-lip block4.923 in ± 0.034 in 125 mmConflictWorked out: {.overall_height} - {.feed_lip_block_height}
Photo 5.3 in
not recorded in brief, from the project brief
Scale: not recorded in brief. Read by calibrated photo measurement
Published “5 in”
retailer listing (not identified in brief), a seller, from the project brief
Probably Black Dog's overall 5 in repeated. The brief's 5.3 in body height doesn't fit the seated magazine (see overall_height).
Published “15 Round: ... Length: 5"”
Black Dog Machine, the maker, read Sep 30, 2026 the page, harvested Sep 30, 2026
Black Dog's length, read as the body below the feed-lip block: the traced 4.86 in rounds to it, and the 25-round's 7 in fits the same reading. M2 read it as the overall height.
Worked out 4.923 in ± 0.034 in used
{.overall_height} - {.feed_lip_block_height}, harvested
Both terms traced from the same side view. Black Dog's 5 in agrees within its rounding; the brief's 5.3 (no photo recorded) doesn't.
photo and derived differ by 0.377 in beyond what each states it is good to.
Length as Black Dog states it (reference points undefined)5 in 127 mmConfirmedPublished: Black Dog Machine, the maker, read Sep 30, 2026
Published “15 Round: ... Length: 5"” used
Black Dog Machine, the maker, read Sep 30, 2026 the page, harvested Sep 30, 2026
Black Dog lists 5 in for both the 10- and 15-round, and 7 in for the 25-round: the body below the feed-lip block, by the traced proportions (see body_height).
Overall height, feed lips to base5.79 in ± 0.03 in 147.1 mmConflictPhoto: the user's own 10-round, the 15's body, lying on each side on tile, a tape on the floor beside it, from about 4 ft; 2026-10-03
Photo 6.19 in
not recorded in brief, from the project brief
Scale: not recorded in brief. Read by the brief's body height 5.3 plus its feed-lip block 0.89 (body_height#photo + feed_lip_block_height#photo)
From the brief's photo figures; fails the seated fit check (0.9 in above the bore).
Photo 5.659 in ± 0.139 in
Sonic X 10-round (same body as the 15), true side view, translucent smoke on white (ar15discounts), harvested
Scale: scale from blackdog-22lr-15.front_to_back = 2.46 in (median width over 0.3–0.7 of the height from the top, 519–522 px 521 px → 211.8 px/in). Read by height of the traced outline (tools/trace.py); feed-lip top to the lowest point of the base (its rear corner), on the outline scaled by the seated front-to-back
Photo 5.79 in ± 0.03 in used
the user's own 10-round, the 15's body, lying on each side on tile, a tape on the floor beside it, from about 4 ft; 2026-10-03, from the site owner
Scale: the tape in each photo (170.4, 173.9 and 185.4 px/in, its 1/8 in ticks fitted to 0.11 px), brought up to the side face (0.87 in above the floor) by the lens's height: 48 to 52 in, found from lengths seen at two heights in the side and edge views (one focal length, 8940 px: 8250 to 9760), so a side face reads 1.5% large on the tape. Read by the feed lips' top to the end of the tab under the spine rib: 5.799, 5.804, 5.794 (the lips and the tab lie at mid-thickness and read 0.5% less large than the faces)
The user's own magazine beside a tape. The earlier trace of a retailer's photo, scaled by the seated front-to-back (5.659 ± 0.139), agrees within its ±; the brief's 6.19 doesn't. It read as follows before 2026-10-03: A true side view scaled by the seated magazine's pin-calibrated front-to-back. Turned square to the magwell (std.ar15.magwell_wall_lean); the black side view agrees (IoU 0.990, 5.63 in). Fitted into the user's flat-lay the outline needs no turn (−0.17 ± 0.8°) and reproduces the seated hang, base angle and scale (free fit 0.991).
brief-sum and trace differ by 0.531 in beyond what each states it is good to.
brief-sum and user-tape differ by 0.4 in beyond what each states it is good to.
M3 (2026-09-30): Black Dog's 5 in isn't this height. Every side view of the body is 2.29–2.31 times as tall as it is front to back (both ar15discounts views, and the smoke 10 in Black Dog's own lineup), which at the seated, pin-calibrated 2.46 in is 5.66 in; the user's three-quarter photo (box pose, ±13% for its close camera) reads the body taller still (5.7 ± 0.8 in), not shorter. Black Dog's 5 in (10/15) and 7 in (25) both fit the body below the feed-lip block, so the figure moved to body_height. M2 read it as this height and passed a fit check with the feed lips under the bore; the traced magazine's feed-lip block reaches 0.17 ± 0.15 in above the brief's bore axis (see the fit check in blockout.test.ts). The brief's 6.19 (its photo figures) is still 0.5 in too tall.
Feed-lip block height0.867 in ± 0.015 in 22 mmConflictPhoto: the user's own 10-round, the 15's body, lying on each side on tile, a tape on the floor beside it, from about 4 ft; 2026-10-03
Photo “about 0.89 in”
not recorded in brief, from the project brief
Scale: not recorded in brief. Read by calibrated photo measurement
Photo 0.804 in ± 0.03 in
Sonic X 10-round (same body as the 15), true side view, translucent smoke on white (ar15discounts), harvested
Scale: scale from blackdog-22lr-15.front_to_back = 2.46 in (median width over 0.3–0.7 of the height from the top, 519–522 px 521 px → 211.8 px/in). Read by −y_max in x [1.9, 2.3] of the traced outline (tools/trace.py); top of the feed lips to the body's top edge ahead of the block (x 1.9–2.3 in from the spine)
Photo 0.867 in ± 0.015 in used
the user's own 10-round, the 15's body, lying on each side on tile, a tape on the floor beside it, from about 4 ft; 2026-10-03, from the site owner
Scale: the tape in each photo (170.4, 173.9 and 185.4 px/in, its 1/8 in ticks fitted to 0.11 px), brought up to the side face (0.87 in above the floor) by the lens's height: 48 to 52 in, found from lengths seen at two heights in the side and edge views (one focal length, 8940 px: 8250 to 9760), so a side face reads 1.5% large on the tape. Read by the feed lips' top above the body's top line ahead of the block: 0.858, 0.865, 0.878
The user's own magazine beside a tape. The retailer's photo (a screwed X-Form with brass rings) reads 0.804: its block stands 0.06 lower on the same body; the brief's 0.89 has no recorded photo and is nearer this.
photo and trace differ by 0.086 in beyond what each states it is good to.
photo and user-tape differ by 0.023 in beyond what each states it is good to.
trace and user-tape differ by 0.063 in beyond what each states it is good to.
Feed lips, across both (the top of the block)0.14 in ± 0.02 in 3.6 mmProvisionalPhoto: the user's own 10-round lying on its spine, front face up, and on its front face, spine up, a tape on the floor beside it; 2026-10-03
Photo 0.14 in ± 0.02 in used
the user's own 10-round lying on its spine, front face up, and on its front face, spine up, a tape on the floor beside it; 2026-10-03, from the site owner
Scale: the tape beside it brought up to the block's own height above the floor (it stands 0.8 to 2 in below the upper edge) by the lens's height, 46 to 48 in; the body in the same views reads blackdog-22lr-15.width. Read by the silhouette's width over the block's top 0.2 in: 0.11 to 0.14 in the two views
Feed lips, from their top down to where the block widens0.225 in ± 0.02 in 5.7 mmProvisionalPhoto: the user's own 10-round lying on its spine, front face up, and on its front face, spine up, a tape on the floor beside it; 2026-10-03
Photo 0.225 in ± 0.02 in used
the user's own 10-round lying on its spine, front face up, and on its front face, spine up, a tape on the floor beside it; 2026-10-03, from the site owner
Scale: the tape beside it brought up to the block's own height above the floor (it stands 0.8 to 2 in below the upper edge) by the lens's height, 46 to 48 in; the body in the same views reads blackdog-22lr-15.width. Read by where the silhouette steps out under the lips, below their top: 0.225 to 0.24
Feed-lip block, across, under the lips0.26 in ± 0.02 in 6.6 mmProvisionalPhoto: the user's own 10-round lying on its spine, front face up, and on its front face, spine up, a tape on the floor beside it; 2026-10-03
Photo 0.26 in ± 0.02 in used
the user's own 10-round lying on its spine, front face up, and on its front face, spine up, a tape on the floor beside it; 2026-10-03, from the site owner
Scale: the tape beside it brought up to the block's own height above the floor (it stands 0.8 to 2 in below the upper edge) by the lens's height, 46 to 48 in; the body in the same views reads blackdog-22lr-15.width. Read by the silhouette's width just under the lips (0.24 below their top): 0.25 to 0.26
Feed-lip block, across, at its neck0.396 in ± 0.02 in 10.1 mmProvisionalPhoto: the user's own 10-round lying on its spine, front face up, and on its front face, spine up, a tape on the floor beside it; 2026-10-03
Photo 0.396 in ± 0.02 in used
the user's own 10-round lying on its spine, front face up, and on its front face, spine up, a tape on the floor beside it; 2026-10-03, from the site owner
Scale: the tape beside it brought up to the block's own height above the floor (it stands 0.8 to 2 in below the upper edge) by the lens's height, 46 to 48 in; the body in the same views reads blackdog-22lr-15.width. Read by the silhouette's width 0.385 below the lips' top (feed_lip_block_neck_below_top), where its taper changes: 0.39
Feed-lip block, its neck below the lips' top0.385 in ± 0.02 in 9.8 mmProvisionalPhoto: the user's own 10-round lying on its spine, front face up, and on its front face, spine up, a tape on the floor beside it; 2026-10-03
Photo 0.385 in ± 0.02 in used
the user's own 10-round lying on its spine, front face up, and on its front face, spine up, a tape on the floor beside it; 2026-10-03, from the site owner
Scale: the tape beside it brought up to the block's own height above the floor (it stands 0.8 to 2 in below the upper edge) by the lens's height, 46 to 48 in; the body in the same views reads blackdog-22lr-15.width. Read by where the block's sides change slope, along the edge's own length (feed-lip top 0, the body's top line at feed_lip_block_height)
Feed-lip block, across, at its shoulder0.572 in ± 0.02 in 14.5 mmProvisionalPhoto: the user's own 10-round lying on its spine, front face up, and on its front face, spine up, a tape on the floor beside it; 2026-10-03
Photo 0.572 in ± 0.02 in used
the user's own 10-round lying on its spine, front face up, and on its front face, spine up, a tape on the floor beside it; 2026-10-03, from the site owner
Scale: the tape beside it brought up to the block's own height above the floor (it stands 0.8 to 2 in below the upper edge) by the lens's height, 46 to 48 in; the body in the same views reads blackdog-22lr-15.width. Read by the silhouette's width 0.705 below the lips' top (feed_lip_block_shoulder_below_top): 0.57
Feed-lip block, its shoulder below the lips' top0.705 in ± 0.02 in 17.9 mmProvisionalPhoto: the user's own 10-round lying on its spine, front face up, and on its front face, spine up, a tape on the floor beside it; 2026-10-03
Photo 0.705 in ± 0.02 in used
the user's own 10-round lying on its spine, front face up, and on its front face, spine up, a tape on the floor beside it; 2026-10-03, from the site owner
Scale: the tape beside it brought up to the block's own height above the floor (it stands 0.8 to 2 in below the upper edge) by the lens's height, 46 to 48 in; the body in the same views reads blackdog-22lr-15.width. Read by where the block's sides turn nearly upright, along the edge's own length
Feed-lip block, across, where it leaves the body0.6 in ± 0.02 in 15.2 mmProvisionalPhoto: the user's own 10-round lying on its spine, front face up, and on its front face, spine up, a tape on the floor beside it; 2026-10-03
Photo 0.6 in ± 0.02 in used
the user's own 10-round lying on its spine, front face up, and on its front face, spine up, a tape on the floor beside it; 2026-10-03, from the site owner
Scale: the tape beside it brought up to the block's own height above the floor (it stands 0.8 to 2 in below the upper edge) by the lens's height, 46 to 48 in; the body in the same views reads blackdog-22lr-15.width. Read by the silhouette's width at the body's top face: 0.604 from the front, 0.594 from the rear; its well in the body's top face is 0.615 by the top view (c532659922ef: 382.0 of the body's 538.6 px)
The catalog drew the block at the body's 0.873 until 2026-10-03.
Feed-lip block, how far down inside the body it shows1.508 in ± 0.02 in 38.3 mmProvisionalPhoto: the user's own 10-round lying on its left side, a tape beside it, from about 4 ft; 2026-10-03
Photo 1.508 in ± 0.02 in used
the user's own 10-round lying on its left side, a tape beside it, from about 4 ft; 2026-10-03, from the site owner
Scale: the tape (170.4 px/in), brought up to the side face by the lens's height (52 in: the face reads 1.5% large). Read by the black block seen through the smoke body: its lower end, picked on a gridded crop (± 0.015) and put through the photo's factor
Feed-lip block inside the body, its rear face from the spine rib's rear face0.588 in ± 0.02 in 14.9 mmProvisionalPhoto: the user's own 10-round lying on its left side, a tape beside it, from about 4 ft; 2026-10-03
Photo 0.588 in ± 0.02 in used
the user's own 10-round lying on its left side, a tape beside it, from about 4 ft; 2026-10-03, from the site owner
Scale: the tape (170.4 px/in), brought up to the side face by the lens's height (52 in: the face reads 1.5% large). Read by the black block seen through the smoke body at 1.28 below the lips' top: its rear edge
Feed-lip block inside the body, its front face from the spine rib's rear face1.155 in ± 0.02 in 29.3 mmProvisionalPhoto: the user's own 10-round lying on its left side, a tape beside it, from about 4 ft; 2026-10-03
Photo 1.155 in ± 0.02 in used
the user's own 10-round lying on its left side, a tape beside it, from about 4 ft; 2026-10-03, from the site owner
Scale: the tape (170.4 px/in), brought up to the side face by the lens's height (52 in: the face reads 1.5% large). Read by the black block seen through the smoke body at 1.28 below the lips' top: its front edge
Spine rib, across0.441 in ± 0.008 in 11.2 mmProvisionalPhoto: the user's own 10-round lying on its front face, spine up; 2026-10-03
Photo 0.441 in ± 0.008 in used
the user's own 10-round lying on its front face, spine up; 2026-10-03, from the site owner
Scale: the tape beside it brought up to the rib (2.47 in above the floor) by the lens's height, 46 in. Read by the rib's two walls, columns 952.3 to 1042.1 (89.8 px)
It runs in the well's spine slot (std.ar15.magwell_spine_slot_width, .470).
Spine rib, how far it stands behind the body's rear face0.15 in ± 0.015 in 3.8 mmProvisionalPhoto: the user's own 10-round lying on its left side, a tape beside it, from about 4 ft; 2026-10-03
Photo 0.15 in ± 0.015 in used
the user's own 10-round lying on its left side, a tape beside it, from about 4 ft; 2026-10-03, from the site owner
Scale: the tape (170.4 px/in), brought up to the side face by the lens's height (52 in: the face reads 1.5% large). Read by the rib's rear face against the body's rear face above it, in the three side photos (ffcd6aa3a249, 3cb5d7ad3c27, 9834343bf7ad)
Magazine catch notch (left side), its upper edge below the feed lips' top1.44 in ± 0.02 in 36.6 mmProvisionalPhoto: the user's own 10-round lying on its right side, its left side up, a tape beside it, from about 4 ft; 2026-10-03
Photo 1.44 in ± 0.02 in used
the user's own 10-round lying on its right side, its left side up, a tape beside it, from about 4 ft; 2026-10-03, from the site owner
Scale: the tape (173.9 px/in), brought up to the side face by the lens's height (51 in: the face reads 1.5% large). Read by the notch's rear upper corner at (0.481, -1.437) in the magazine's frame, picked on a gridded crop (± 0.015) and put through the photo's factor
Where the magazine hangs on the lower's catch: with std.ar15.mag_catch_slot_* it gives the seat's height (bad-workhorse-lower.magazine_seat_y).
Magazine catch notch (left side), its height0.3 in ± 0.02 in 7.6 mmProvisionalPhoto: the user's own 10-round lying on its right side, its left side up, a tape beside it, from about 4 ft; 2026-10-03
Photo 0.3 in ± 0.02 in used
the user's own 10-round lying on its right side, its left side up, a tape beside it, from about 4 ft; 2026-10-03, from the site owner
Scale: the tape (173.9 px/in), brought up to the side face by the lens's height (51 in: the face reads 1.5% large). Read by its upper edge at -1.437, its lower at -1.738
Magazine catch notch (left side), its rear end from the spine rib's rear face0.481 in ± 0.02 in 12.2 mmProvisionalPhoto: the user's own 10-round lying on its right side, its left side up, a tape beside it, from about 4 ft; 2026-10-03
Photo 0.481 in ± 0.02 in used
the user's own 10-round lying on its right side, its left side up, a tape beside it, from about 4 ft; 2026-10-03, from the site owner
Scale: the tape (173.9 px/in), brought up to the side face by the lens's height (51 in: the face reads 1.5% large). Read by the notch's rear upper corner at (0.481, -1.437)
Magazine catch notch (left side), its front end from the spine rib's rear face1.048 in ± 0.02 in 26.6 mmProvisionalPhoto: the user's own 10-round lying on its right side, its left side up, a tape beside it, from about 4 ft; 2026-10-03
Photo 1.048 in ± 0.02 in used
the user's own 10-round lying on its right side, its left side up, a tape beside it, from about 4 ft; 2026-10-03, from the site owner
Scale: the tape (173.9 px/in), brought up to the side face by the lens's height (51 in: the face reads 1.5% large). Read by the notch's front lower corner at (1.048, -1.738)
Weld boss, its dark disc across (six of them, seen through each side wall)0.185 in ± 0.015 in 4.7 mmProvisionalPhoto: the user's own 10-round lying on its left side, its marked right side up, close: from about 16 in, a tape beside it; 2026-10-03
Photo 0.185 in ± 0.015 in used
the user's own 10-round lying on its left side, its marked right side up, close: from about 16 in, a tape beside it; 2026-10-03, from the site owner
Scale: the body itself in the same photo: its rib-to-front size reads 2.607 in at the tape's scale (253.3 px/in) and is blackdog-22lr-15.front_to_back, so the upper face is at 262.6 px/in (the lens about 16 in above it). Read by the two front bosses' discs on the gridded close photo: the upper 2.215 to 2.405 along and 1.02 to 1.20 down, the lower 2.24 to 2.42; the far photo has them 23 to 25 px (0.14) where its contrast drops the rim
Weld boss, the hole at its middle on the outside of each wall0.09 in ± 0.02 in 2.3 mmProvisionalPhoto: the user's own 10-round lying on its left side, its marked right side up, close: from about 16 in, a tape beside it; 2026-10-03
Photo 0.09 in ± 0.02 in used
the user's own 10-round lying on its left side, its marked right side up, close: from about 16 in, a tape beside it; 2026-10-03, from the site owner
Scale: the body itself in the same photo: its rib-to-front size reads 2.607 in at the tape's scale (253.3 px/in) and is blackdog-22lr-15.front_to_back, so the upper face is at 262.6 px/in (the lens about 16 in above it). Read by the dark hole inside the upper front boss's ring, 2.29 to 2.37 along; its depth isn't read
A few pixels across in every photo: the size of a dot, not of a hole to be gauged.
Round post across the body at mid-height (a dark spot from both sides), across0.19 in ± 0.02 in 4.8 mmProvisionalPhoto: the user's own 10-round lying on its left side, a tape beside it, from about 4 ft; 2026-10-03
Photo 0.19 in ± 0.02 in used
the user's own 10-round lying on its left side, a tape beside it, from about 4 ft; 2026-10-03, from the site owner
Scale: the outline's own scale in that photo (172.4 px/in: profiles.side). Read by the dark spot at (0.92, -4.16) in the magazine's frame, 33 px across; it is at the same place in the left side's photo (3cb5d7ad3c27)
Side wall, its thickness0.053 in ± 0.01 in 1.3 mmProvisionalPhoto: the user's own 10-round lying on its spine, front face up, a tape on the floor beside it; 2026-10-03
Photo 0.053 in ± 0.01 in used
the user's own 10-round lying on its spine, front face up, a tape on the floor beside it; 2026-10-03, from the site owner
Scale: the tape beside it brought up to the front face (2.47 in above the floor) by the lens's height, 48 in: 196.7 px/in. Read by the darker strip down each side of the smoke front face, where the side wall is seen end-on: 10.5 px
Wide groove down each side wall, how deep at its middle0.087 in ± 0.015 in 2.2 mmProvisionalPhoto: the user's own 10-round held base-on to the lens, no scale in frame; 2026-10-03
Photo 0.087 in ± 0.015 in used
the user's own 10-round held base-on to the lens, no scale in frame; 2026-10-03, from the site owner
Scale: the base's own thickness in the same photo, 504.6 px for blackdog-22lr-15.width: 581 px/in (its length reads 1.2% long against the thickness: the base is tilted a little to the lens). Read by the notch it cuts in the base's outline on the edge that has the floor behind it (the right side's): an arc 49 to 52 px inside the straight line through the edge on either side of it; the other edge's is the same within what the hand behind it lets be seen
An arc of this depth over the groove's width (0.28) has a radius of about 0.16: round-bottomed, as it looks.
Narrow groove at mid-body down each side wall, how deep0.028 in ± 0.01 in 0.7 mmProvisionalPhoto: the user's own 10-round held base-on to the lens, no scale in frame; 2026-10-03
Photo 0.028 in ± 0.01 in used
the user's own 10-round held base-on to the lens, no scale in frame; 2026-10-03, from the site owner
Scale: the base's own thickness in the same photo, 504.6 px for blackdog-22lr-15.width: 581 px/in (its length reads 1.2% long against the thickness: the base is tilted a little to the lens). Read by its notch in the base's outline, the right side's edge: 15 to 17 px inside the straight edge
Narrow groove near the rear down each side wall, how deep0.033 in ± 0.01 in 0.8 mmProvisionalPhoto: the user's own 10-round held base-on to the lens, no scale in frame; 2026-10-03
Photo 0.033 in ± 0.01 in used
the user's own 10-round held base-on to the lens, no scale in frame; 2026-10-03, from the site owner
Scale: the base's own thickness in the same photo, 504.6 px for blackdog-22lr-15.width: 581 px/in (its length reads 1.2% long against the thickness: the base is tilted a little to the lens). Read by its notch in the base's outline, the right side's edge: 19 to 20 px inside the straight edge
Recess above the catch notch (left side, open to the top face), its rear end from the spine rib's rear face0.51 in ± 0.02 in 13 mmProvisionalPhoto: the user's own 10-round lying on its right side, its left side up, a tape beside it, from about 4 ft; 2026-10-03
Photo 0.51 in ± 0.02 in used
the user's own 10-round lying on its right side, its left side up, a tape beside it, from about 4 ft; 2026-10-03, from the site owner
Scale: the tape (173.9 px/in), brought up to the side face by the lens's height (51 in: the face reads 1.5% large). Read by the recess's rear upper corner at (0.510, -0.928) in the magazine's frame, picked on a gridded crop (± 0.015) and put through the photo's factor
Recess above the catch notch (left side), its front end from the spine rib's rear face1.019 in ± 0.02 in 25.9 mmProvisionalPhoto: the user's own 10-round lying on its right side, its left side up, a tape beside it, from about 4 ft; 2026-10-03
Photo 1.019 in ± 0.02 in used
the user's own 10-round lying on its right side, its left side up, a tape beside it, from about 4 ft; 2026-10-03, from the site owner
Scale: the tape (173.9 px/in), brought up to the side face by the lens's height (51 in: the face reads 1.5% large). Read by the recess's front lower corner at (1.019, -1.409)
Recess above the catch notch (left side), how far it is set in from the side face0.035 in ± 0.01 in 0.9 mmProvisionalPhoto: the user's own 10-round held top-on to the lens, no scale in frame; 2026-10-03
Photo 0.035 in ± 0.01 in used
the user's own 10-round held top-on to the lens, no scale in frame; 2026-10-03, from the site owner
Scale: the top face's own thickness in the same photo, 538.6 px for blackdog-22lr-15.width: 620.5 px/in. Read by the top face's outline on the left side's edge: between 0.50 and 1.05 from the spine rib's rear face the edge stands 22 px inside the edge ahead of it and behind it
Lip under the catch notch (left side), how far it stands out of the side face0.026 in ± 0.008 in 0.7 mmProvisionalPhoto: the user's own 10-round lying on its front face, spine up, a tape on the floor beside it; 2026-10-03
Photo 0.026 in ± 0.008 in used
the user's own 10-round lying on its front face, spine up, a tape on the floor beside it; 2026-10-03, from the site owner
Scale: the tape beside it brought up to the upper edge by the lens's height, 46 in: 202.7 px/in across. Read by the left side's silhouette steps out 5.2 px over rows 1036 to 1066, which is 1.71 to 1.86 below the feed lips' top
More than a centred body has room for in the Army drawing's well (std.ar15.magwell_width leaves 0.015 a side): it is level with the catch slot's lower edge within what the two readings carry, where the well's wall is cut away, or the body sits to one side. Inside the well when seated, and not seen.
Lip under the catch notch (left side), its lower end below the feed lips' top1.859 in ± 0.02 in 47.2 mmProvisionalPhoto: the user's own 10-round lying on its front face, spine up, a tape on the floor beside it; 2026-10-03
Photo 1.859 in ± 0.02 in used
the user's own 10-round lying on its front face, spine up, a tape on the floor beside it; 2026-10-03, from the site owner
Scale: the same view along the body: 204.0 px/in. Read by row 1066, where the left silhouette comes back in to the wall
Keyhole slot in the base, its width (and its round end's diameter)0.4 in ± 0.015 in 10.2 mmProvisionalPhoto: the user's own 10-round held base-on to the lens, no scale in frame; 2026-10-03
Photo 0.4 in ± 0.015 in used
the user's own 10-round held base-on to the lens, no scale in frame; 2026-10-03, from the site owner
Scale: the base's own thickness in the same photo, 504.6 px for blackdog-22lr-15.width: 581 px/in (its length reads 1.2% long against the thickness: the base is tilted a little to the lens). Read by the slot's two long edges: 0.461 of the thickness (its round end 0.456)
Keyhole slot in the base, its length with its round end0.998 in ± 0.03 in 25.3 mmProvisionalPhoto: the user's own 10-round held base-on to the lens, no scale in frame; 2026-10-03
Photo 0.998 in ± 0.03 in used
the user's own 10-round held base-on to the lens, no scale in frame; 2026-10-03, from the site owner
Scale: the base's own thickness in the same photo, 504.6 px for blackdog-22lr-15.width: 581 px/in (its length reads 1.2% long against the thickness: the base is tilted a little to the lens). Read by from the round end's front to the square end: 1.150 of the thickness
Keyhole slot in the base, its round end's front from the body's front face0.688 in ± 0.03 in 17.5 mmProvisionalPhoto: the user's own 10-round held base-on to the lens, no scale in frame; 2026-10-03
Photo 0.688 in ± 0.03 in used
the user's own 10-round held base-on to the lens, no scale in frame; 2026-10-03, from the site owner
Scale: the base's own thickness in the same photo, 504.6 px for blackdog-22lr-15.width: 581 px/in (its length reads 1.2% long against the thickness: the base is tilted a little to the lens). Read by 0.793 of the thickness; its square end is 0.647 from the body's rear face, and the three with the slot's length come to 2.333 against the body's 2.364
Hang below magwell bottom when seated2.35 in ± 0.15 in 59.7 mmCorroboratedPhoto: Range Is Charm / Nordic Components: complete NC rifle, straight left side, smoke Black Dog seated; supplied in chat
Photo 2.4 in ± 0.2 in
not yet archived, from the project brief
Scale: not recorded in brief. Read by calibrated photo measurement
Photo 2.35 in ± 0.15 in used
Range Is Charm / Nordic Components: complete NC rifle, straight left side, smoke Black Dog seated; supplied in chat, from the site owner
Scale: top-rail slot period 7.373 px = 0.394 in (std.picatinny.slot_pitch), FFT over 360 px of rail: 18.71 px/in. Read by magwell lip (y≈192) to the magazine's bottom edge, 44 px averaged along the base (2.14 in at the front, 2.57 at the rear, where the base slopes down)
Photo 2.4 in ± 0.1 in
complete rifle lying flat on its right side, photographed straight down; supplied in chat, from the site owner
Scale: pin frame: takedown, pivot, trigger pin and selector (Hough-refined), 49.18 px/in, rotation 1.43°, rms 0.03 in. Phone lens distortion compresses the far right of the frame (rail slots read 3.6% small at the handguard), so only readings near the pins are used. Read by magwell lip (≈ −2.15 in) to the magazine's bottom edge near the base's centre (≈ −4.55 in); the base slopes, lowest at the rear
Rail-calibrated, with its photo on file; the flat-lay photo (≈2.4) and the brief's 2.4 ± 0.2 (photo not archived) agree.
Capacity15ConfirmedPublished: Black Dog Machine, the maker, read Sep 30, 2026
Published “Capacity: 10rd, 15rd, 25rd” used
Black Dog Machine, the maker, read Sep 30, 2026 the page, harvested Sep 30, 2026
The 15-round option ("15 Round- Smoke- Nylon Lip"): the user's magazine.
Body thickness (Z)0.868 in ± 0.007 in 22 mmCorroboratedPhoto: the user's own 10-round lying on its spine, on its front face, and seen straight down on its top; 2026-10-03
Photo 0.892 in ± 0.035 in
smoke 25-round end view (supplied in chat, RifleMags): a V208's, from the site owner
Scale: the 25-round's overall height (blackdog-22lr-25.overall_height, 7.972 in: y-extent 840 px). Read by the 25-round's end view at its top section (blackdog-22lr-25.width#endview-50), taken as the same cross-section
0.873 while the 25's height was 7.801, and adopted until 2026-10-03 (as `shared`). The photo is of Black Dog's V208, whose body may not be the Sonic X's.
Photo 0.998 in ± 0.136 in
smoke magazine, three-quarter view (supplied in chat), from the site owner
Scale: box pose from edges bottom_T, bottom_D, left_V, right_V, top_D (orthographic; parallel-edge spread 0.09°, 2.68°); D = 2.460 in (blackdog-22lr-15.front_to_back, conflict). Read by T/D = 0.406 from the 3-edge orthographic pose (tools/box_pose.py); ± 13% on the ratio (edge fits, rounded corners) plus the reference ±
Thickness at the body (ribs included in the silhouette). A 10/15-round (same form factor); the cross-section is shared with the 25-round.
Photo 0.868 in ± 0.007 in used
the user's own 10-round lying on its spine, on its front face, and seen straight down on its top; 2026-10-03, from the site owner
Scale: the tape beside it, brought up to the upper edge (2.3 to 2.5 in above the floor: 5.0 to 5.2% large) by the lens's height (46 to 48 in); and, without the tape, the width against that edge's own length from the side photos, and against the body's front-to-back in the top view. Read by between the side walls' outer faces (the far side face, seen obliquely as a pale strip, left out): 0.8685 and 0.8682 by the tape, 0.8687 and 0.8646 by the edge's length, 0.8682 in the top view. They share the side photos' scale. ± is the lens's height, the landmarks' rounding and the wall band's end
The user's own magazine, five routes within 0.004 in, inside the TDP magwell's 0.898. The 25-round's end view (0.89, a V208) and the box pose agree within their ±. Before 2026-10-03: The end view measures thickness directly against the magazine's own height; the three-quarter photo needs a pose solve with a close camera (vertical edges converge 2.7°). They agree within the pose's ± since the 25's height was re-traced (M3), and both sit under the TDP magwell's 0.898 in (the pose's lower half).
No published value (two discovery passes, 2026-09-30). Measured from two user-supplied photos: the 25-round's straight-on end view (direct; it turned out to show Black Dog's V208, see blackdog-22lr-25.width), and a three-quarter view of a 10/15-round (box pose, perspective-limited). The 10/15 and 25 share the body cross-section, which fits the AR-15 magwell (the lower is 1.5 in across outside). M3: the TDP magwell is 0.898 in inside (std.ar15.magwell_width), an upper bound for the top section.
Base plate angle (rises toward the front, seated)9.9° ± 0.3°CorroboratedPhoto: the user's own 10-round on each side, 2026-10-03
Photo 9.4 deg ± 1.2 deg
complete rifle lying flat, straight down; supplied in chat, from the site owner
Scale: pin frame (4 points, rms 0.03 in), rotation 1.43°. Read by base edge corners picked on a 5× grid, rear (826, 993) to front (947, 976): 8.0° in the image + the frame rotation
Photo 9.7 deg ± 3 deg
Range Is Charm complete rifle, left side; supplied in chat, from the site owner
Scale: rail slot period, 18.71 px/in. Read by hang at the front (2.14 in) and rear (2.57 in) over the 2.51 in front-to-back
Photo 9.9 deg ± 0.3 deg used
the user's own 10-round on each side, 2026-10-03, from the site owner
Scale: none needed: an angle within the outline, the front face square. Read by the base, a straight line fitted to 0.2 to 0.3 px, against the front face's normal: 9.79 to 10.06 in the three far photos (10.07 and 10.30 in the two close ones)
The magazine itself, its base a straight line in three photos; the seated flat-lay (9.4 ± 1.2) and the Range Is Charm photo agree.
Pointed out by the user from the complete-rifle photos. The 25-round's base is angled differently (curved body) and isn't measured yet.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
AR-15 magazine well
- Lower receivers
- Aero Precision M4E1 complete lower, A2 grip and M4 stock, Aero Precision M4E1 Stripped Lower Receiver, Battle Arms Development Workhorse stripped lower, BCM MK2 AR-15 Lower Receiver, Bear Creek Arsenal BC-15 Multi Caliber, Lower Receiver, Black Anodized, Geissele Automatics Super Duty AR-15 Lower Receiver - Stripped Lower, Palmetto State Armory AR-15 "Stealth" Stripped Lower Receiver
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- AR15Discounts $15.95 Smoke Nov 21, 2026, stock not said
- AR15Discounts $15.95 Black Nov 21, 2026, stock not said