Safety selector
CMMG Safety Selector, AR15
The plain selector a rifle comes with: one lever, on the left side, turned a quarter turn between safe and fire. CMMG: "AR-15 Single sided safety selector. Featuring a mil-spec style selector lever and standard 90° throw operation." and "meets or exceeds mil-spec". Steel with a parkerized finish (Sportsman's Warehouse, of this part).

- Weight
- 0.65 oz ± 0.07 oz Provisionalworked out: (0.785398163 * {.shaft_d} * {.shaft_d} * {.shaft_length} + 0.785398163 * {.hub_d} * {.hub_d} * {.hub_t} + ({.paddle_width} * ({.lever_reach} - {.paddle_start} - {.paddle_width}) + 0.785398163 * {.paddle_width} * {.paddle_width}) * ({.paddle_base_t} - {.paddle_relief}) + (({.paddle_width} - 2 * {.step_1_inset}) * ({.lever_reach} - {.paddle_start} - {.paddle_width}) + 0.785398163 * ({.paddle_width} - 2 * {.step_1_inset}) * ({.paddle_width} - 2 * {.step_1_inset})) * ({.step_1_height} - {.paddle_base_t}) + (({.paddle_width} - 2 * {.step_2_inset}) * ({.lever_reach} - {.paddle_start} - {.paddle_width}) + 0.785398163 * ({.paddle_width} - 2 * {.step_2_inset}) * ({.paddle_width} - 2 * {.step_2_inset})) * ({.step_2_height} - {.step_1_height}) + (({.paddle_width} - 2 * {.step_3_inset}) * ({.lever_reach} - {.paddle_start} - {.paddle_width}) + 0.785398163 * ({.paddle_width} - 2 * {.step_3_inset}) * ({.paddle_width} - 2 * {.step_3_inset})) * ({.step_3_height} - {.step_2_height}) + (({.paddle_width} - 2 * {.step_4_inset}) * ({.lever_reach} - {.paddle_start} - {.paddle_width}) + 0.785398163 * ({.paddle_width} - 2 * {.step_4_inset}) * ({.paddle_width} - 2 * {.step_4_inset})) * ({.step_4_height} - {.step_3_height}) + (({.paddle_width} - 2 * {.step_5_inset}) * ({.lever_reach} - {.paddle_start} - {.paddle_width}) + 0.785398163 * ({.paddle_width} - 2 * {.step_5_inset}) * ({.paddle_width} - 2 * {.step_5_inset})) * ({.lever_standoff} - {.step_4_height})) * {std.density.steel}
- Lowest price
- $11.95 at CMMG, read Nov 21, 2026
- Maker's number
- 55CA741
- Colour
- Parkerized, dark grey
- Drawn as
- modelled
- Maker's page
- cmmg.com
Added to “22RB .22 LR rifle”, a build on the start page, which has no safety selector.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Diameter of the shaft that turns in the receiver0.372 in ± 0.00075 in 9.5 mmConfirmedWorked out: {std.ar15.selector_shaft_d}
Worked out 0.37225 in ± 0.00075 in used
{std.ar15.selector_shaft_d}, from the site owner
The Army's drawing of the standard selector (9381367: .3730 DIA -.0015), which CMMG says its own meets ("meets or exceeds mil-spec", https://cmmg.com/safety-selector-ar15). No page of CMMG's states a diameter.
Length of shaft between the faces that bear on the receiver's two sides0.938 in ± 0.018 in 23.8 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: the view along the lever, zone D-4
Standard “.760 +.010 -.005 and .170 +.015 -.005 (1.180 REF overall, 1.010 REF)” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: the view along the lever, zone D-4, from the site owner
The chain's reading: 1.180 REF is the whole part across the rifle, from the top of the serrations to the shaft's far end; .170 from the far end to the detent notches' centre line; 1.010 REF from that line to the top of the serrations; .760 from that line to the lever's inner face, the face View H measures .050 REF (the hub) and .250 (the serrations' top) from: 1.010 less .760 is that .250. So the shaft is .760 and .170, .930 at the nominals, and the middle of its tolerance (.920 to .955) is the figure here.
Model 0.944 in ± 0.001 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle, from the site owner
Read by the shaft's end face (y 0) to the lever's inner face (the plane at y 23.9776 mm)
The Army's drawing; the reference model's shaft is inside its tolerance.
A one-sided selector: from the lever's inner face, which bears on the receiver's left side, to the shaft's far end. The receiver is .88 wide (std.ar15.lower_body_width): the end stands out of its right side by the difference.
Chamfer round the shaft's far end0.024 in ± 0.011 in 0.6 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: the view along the lever, zone D-4
Standard “.024 ±.011 X 45° ±2°” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: the view along the lever, zone D-4, from the site owner
The end that stands out of the receiver's right side. The reference model has .015.
Diameter of the lever's hub0.48 in ± 0.01 in 12.2 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: face view, zone B-7
Standard “.48 DIA” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: face view, zone B-7, from the site owner
Model 0.477 in ± 0.001 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle, from the site owner
Read by the hub's cylinder, r 6.0579 mm
Photo 0.47 in ± 0.015 in
Aero Precision M4A1 clone complete lower, mil-spec parts kit, straight left side, 1920 px: another maker's mil-spec selector, on SAFE, harvested
Scale: that photo's pin frame (data/ledger/rise-lpk.yaml): takedown (1781.5, 356.5), pivot (121.5, 362.5), 6.375 apart: 260.4 px/in; the selector's axis lands at (1572.4, 477.8) by std.ar15.selector_x and selector_y, and the hub's middle reads (1572, 478.8). Read by the hub's top and bottom on a 5x crop: y 417.6 and 540.0, 122.4 px
A check of the drawing's reading on a real part of another make; ± for edges two pixels soft.
The Army's drawing; the reference model and a photo of a mil-spec selector installed agree with it.
Thickness of the hub's plate (its inner face on the receiver to its outer face)0.05 in ± 0.005 in 1.3 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: the view along the lever, zone D-4, and View H (scale 10/1)
Standard “.050 (the view along the lever); .050 REF (View H)” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: the view along the lever, zone D-4, and View H (scale 10/1), from the site owner
View H measures it from the same line as the serrations' heights: the lever's inner face.
Model 0.052 in ± 0.001 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle, from the site owner
Read by the planes at y 23.9776 and 25.2984 mm
The Army's drawing; the reference model has two thousandths more.
The pointer's tip, from the selector's axis0.34 in ± 0.01 in 8.6 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: face view, zone B-7
Standard “.34 (1.15 REF = .34 + .81)” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: face view, zone B-7, from the site owner
Opposite the thumb piece. On the mil-spec selector installed in a copy on file the tip reads .32 from the axis at 260.4 px/in: a casting's point, a little blunt.
Model 0.3385 in ± 0.001 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle, from the site owner
Read by where the pointer's two flanks meet, x 8.5979 mm
The Army's drawing; the reference model agrees.
The pointer's included angle60° ± 2°ConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: face view, zone B-7
Standard “60° INCL ±2.0°” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: face view, zone B-7, from the site owner
The reference model's two flanks are 60° apart too (normals 0.5, ±0.866).
Radius that blends each of the pointer's flanks into the hub0.09 in ± 0.01 in 2.3 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: face view, zone B-7
Standard “.09 R” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: face view, zone B-7, from the site owner
Two leaders, one to each shoulder: a hollow radius, which gives the hub the onion shape the face view draws.
Width of the thumb piece0.25 in ± 0.005 in 6.3 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: face view, zone B-7
Standard “.250 (.125 from its centre line)” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: face view, zone B-7, from the site owner
Model 0.251 in ± 0.001 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle, from the site owner
Read by its two side planes, z ±3.1877 mm
Photo 0.258 in ± 0.015 in
Aero Precision M4A1 clone complete lower, mil-spec parts kit, straight left side, 1920 px: another maker's mil-spec selector, on SAFE, harvested
Scale: that photo's pin frame, 260.4 px/in (hub_d's measurement says how it is checked). Read by the thumb piece's upper and lower edges on a 5x crop: y 444.4 and 511.6, 67.2 px
A check of the drawing's reading on a real part of another make.
The Army's drawing; the reference model and a photo of a mil-spec selector installed agree with it.
The lever's reach from the selector's axis to its tip0.81 in ± 0.01 in 20.6 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: face view, zone B-7
Standard “.81 (also .09 + .72 REF)” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: face view, zone B-7, from the site owner
Model 0.8045 in ± 0.001 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle, from the site owner
Read by the far end's cylinder: its axis 17.2466 mm from the selector's, r 3.1877 mm
Photo 0.809 in ± 0.012 in
Aero Precision M4A1 clone complete lower, mil-spec parts kit, straight left side, 1920 px: another maker's mil-spec selector, on SAFE, harvested
Scale: that photo's pin frame, 260.4 px/in (hub_d's measurement says how it is checked). Read by the thumb piece's rear end on a 5x crop, x 1783.0, from the axis at 1572.4
A check of the drawing's reading on a real part of another make.
The Army's drawing; the reference model and a photo of a mil-spec selector installed agree with it.
The thumb piece's far end.
Where the thumb piece begins, from the selector's axis (its near end, a full round)0.09 in ± 0.01 in 2.3 mmConflictStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: face view, zone B-7
Standard “.09 (and .72 REF from there to the far end: .81)” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: face view, zone B-7, from the site owner
Read between the axis' line and the line the .72 REF starts from; the view along the rifle has the serrations beginning the same .1 below the axis, and View H's detail of that end puts it .192 above the relief's step at .281.
Model -0.1255 in ± 0.001 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle, from the site owner
Read by the near end's cylinders are about the selector's own axis (r 3.1877 mm and the terraces' radii): the slab's end is its radius on the pointer's side of the axis
Negative: past the axis, toward the pointer.
The Army's drawing, which CMMG's photo of its own selector bears out; the reference model draws another casting, the one Aero's kit has.
tdp and model differ by 0.215 in beyond what each states it is good to.
The one place the drawing and the reference model part. On the drawing the thumb piece's near end is .09 from the axis on the thumb piece's side, so the hub's face is plain round the axis; the reference model centres that end's round on the axis, as Aero's kit selector does (a copy on file: its terraces' front end is .128 ahead of the axis). CMMG's own photo (b9b588162284) has the hub's face plain round the axis and the thumb piece's slab rising from it below: the drawing's.
Height of the thumb piece's slab, from the lever's inner face0.125 in ± 0.005 in 3.2 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1)
Standard “.125” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1), from the site owner
View H's six figures across (.250, .240, .220, .200, .170, .125) are measured from one line, the lever's inner face (the same line as .050 REF, the hub): how far out each terrace's top stands. Its five figures down (.009 to .110) are how far each terrace's end is drawn in from the slab's. The reference model reads the view the same way (its tops .124, .172, .200, .224, .239, .253 from the inner face; drawn in .010, .025, .043, .074, .110). The kit selector's ledger (rise-lpk.selector_serration_height) took the .110 for a height.
Model 0.124 in ± 0.001 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle, from the site owner
Read by the slab's top plane at y 27.1272 mm, from the inner face at 23.9776
The Army's drawing; the reference model agrees.
Gap between the thumb piece's underside and the receiver's side0.015 in ± 0.005 in 0.4 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: the view along the rifle, zone B-5
Standard “.015” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: the view along the rifle, zone B-5, from the site owner
The thumb piece's underside steps away from the lever's inner face; View H draws the step .192 beyond the slab's near end. CMMG's photo shows the step across the underside.
Model 0.014 in ± 0.001 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle, from the site owner
Read by the underside's plane at y 24.3332 mm, from the inner face at 23.9776
The Army's drawing; the reference model agrees.
Where the relief under the thumb piece begins, from the selector's axis0.281 in ± 0.005 in 7.1 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: the view along the rifle, zone B-5
Standard “.281” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: the view along the rifle, zone B-5, from the site owner
From the axis' line to the line through View H's circle: taken as the relief's step, which is where the reference model has it; the hub ends at .24.
Model 0.2805 in ± 0.001 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle, from the site owner
Read by the step's plane at x -7.1247 mm
The Army's drawing; the reference model has the step there.
First serration (terrace): drawn in from the slab's outline0.009 in ± 0.005 in 0.2 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1); FULL R ON ALL STEPPED SERRATIONS (face view)
Standard “.009” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1); FULL R ON ALL STEPPED SERRATIONS (face view), from the site owner
The reference model: .010.
First serration (terrace): its top, from the lever's inner face0.17 in ± 0.005 in 4.3 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1)
Standard “.170” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1), from the site owner
The reference model: .172.
Second serration (terrace): drawn in from the slab's outline0.025 in ± 0.005 in 0.6 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1)
Standard “.025” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1), from the site owner
The reference model: .025.
Second serration (terrace): its top, from the lever's inner face0.2 in ± 0.005 in 5.1 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1)
Standard “.200” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1), from the site owner
The reference model: .200.
Third serration (terrace): drawn in from the slab's outline0.043 in ± 0.005 in 1.1 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1)
Standard “.043” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1), from the site owner
The reference model: .043.
Third serration (terrace): its top, from the lever's inner face0.22 in ± 0.005 in 5.6 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1)
Standard “.220” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1), from the site owner
The reference model: .224.
Fourth serration (terrace): drawn in from the slab's outline0.075 in ± 0.005 in 1.9 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1)
Standard “.075” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1), from the site owner
The reference model: .074.
Fourth serration (terrace): its top, from the lever's inner face0.24 in ± 0.005 in 6.1 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1)
Standard “.240” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1), from the site owner
The reference model: .239.
Fifth serration (the ridge along the middle): drawn in from the slab's outline0.11 in ± 0.005 in 2.8 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1)
Standard “.110” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1), from the site owner
It leaves a ridge .030 wide; its top is lever_standoff. The reference model: .110.
How far the lever stands out from the receiver's side0.25 in ± 0.005 in 6.3 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1) and the view along the lever, zone D-4
Standard “.250 (View H); 1.010 REF less .760” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1) and the view along the lever, zone D-4, from the site owner
Model 0.253 in ± 0.001 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec rifle, from the site owner
Read by the ridge's top plane at y 30.4038 mm, from the inner face at 23.9776
The Army's drawing, by two of its views; the reference model agrees.
The top of the last serration, from the lever's inner face.
The arc it turns through between safe and fire90°ConfirmedPublished: CMMG, Safety Selector, AR15 (55CA741), the maker, read Oct 12, 2026
Published “standard 90° throw operation” used
CMMG, Safety Selector, AR15 (55CA741), the maker, read Oct 12, 2026 the page, harvested Oct 12, 2026
The drawing's section G-G has the detent's seats 90° apart. Nothing is posed by it: the selector is drawn on SAFE.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
AR-15 safety selector
- Lower receivers
- Aero Precision M4E1 complete lower, A2 grip and M4 stock, Aero Precision M4E1 Stripped Lower Receiver, Battle Arms Development Workhorse stripped lower, BCM MK2 AR-15 Lower Receiver, Bear Creek Arsenal BC-15 Multi Caliber, Lower Receiver, Black Anodized, Geissele Automatics Super Duty AR-15 Lower Receiver - Stripped Lower, Palmetto State Armory AR-15 "Stealth" Stripped Lower Receiver
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- CMMG $11.95 Nov 21, 2026, in stock that day
- Sportsman's Warehouse $11.99 Nov 21, 2026, in stock that day
- Impact Guns $16.66 Nov 21, 2026, in stock that day