Grip
Magpul MOE+ grip
Magpul's MOE grip with a rubber overmould: the traditional AR-15 lean (Magpul says 25 degrees; its straps average 26 installed), a beavertail that wraps the receiver's tang, ridged straps and a storage cap. Leans about ten degrees more than the MOE-K2+ and hangs 0.65 in less.

- Weight
- 3.4 oz Confirmedpublished: Magpul, MOE+ Grip - AR15/M4 (MAG416), the maker, read Oct 1, 2026
- Lowest price
- $22.75 at Right To Bear, read Nov 21, 2026 (Black)
- Maker's number
- MAG416
- Colours
- Black, FDE, ODG, Stealth Gray
- Drawn as
- modelled
In “22RB carbine, scoped”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Grip angle (the straps' lean from vertical, installed)26.3° ± 1.4°CorroboratedPhoto: Aero Precision APAR501124: a complete lower with the plain MOE, straight right side, 1000 x 1000
Published “Grip Angle 25 degrees”
Magpul, MOE+ Grip - AR15/M4 (MAG416), the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
Magpul doesn't say which line the angle is measured on: "Traditional 25-degree grip angle familiar to AR-15 shooters".
Photo 26.282 deg ± 1.377 deg used
Aero Precision APAR501124: a complete lower with the plain MOE, straight right side, 1000 x 1000, harvested
Scale: frame from the reviewed holes takedown, pivot, selector, hammer, trigger (63.7 px/in, rms 0.012 in over 5 points). Read by mean lean of the fitted profile's edges in the band 0.45–0.85 of its height (rear 27.6°, front 25.0°) of the traced outline (tools/trace.py); the straps' mean lean (band 0.45–0.85 of the height) once fitted to the installed grip
Photo 26.202 deg ± 1.377 deg
Aero Precision APAR501124: a complete lower with the plain MOE, straight left side, 1000 x 630, harvested
Scale: frame from the reviewed holes takedown, pivot, selector, hammer, trigger (63.3 px/in, rms 0.019 in over 5 points). Read by mean lean of the fitted profile's edges in the band 0.45–0.85 of its height (rear 27.5°, front 24.9°) of the traced outline (tools/trace.py); the straps' mean lean (band 0.45–0.85 of the height) once fitted to the installed grip
The straps' lean on a grip seated on a lower, from two pin-framed photos that agree within 0.1°. Magpul's figure fits the front strap alone.
The mean of the back and front straps' lean with the flat top level. Magpul's 25 degrees is the front strap's (24.9 to 25.0 in both fits); the back strap leans 27.5.
"Height, receiver to bottom" (Magpul)4 in ± 0.05 in 101.6 mmConfirmedPublished: Magpul, MOE+ Grip - AR15/M4 (MAG416), the maker, read Oct 1, 2026
Published “Height, receiver to bottom 4.0 in.” used
Magpul, MOE+ Grip - AR15/M4 (MAG416), the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
Grip's lowest point below the pin line, installed (the plain MOE on Aero's complete lower)5.13 in ± 0.034 in 130.3 mmConflictPhoto: Aero Precision APAR501124: a complete lower with the plain MOE, straight left side, 1000 x 630
Photo 5.016 in ± 0.031 in
Aero Precision APAR501124: a complete lower with the plain MOE, straight right side, 1000 x 1000, harvested
Scale: frame from the reviewed holes takedown, pivot, selector, hammer, trigger (63.7 px/in, rms 0.012 in over 5 points). Read by −y_min in x [-2.6, 1.0] of the traced outline (tools/trace.py); the grip's lowest point (its toe, at the front of the cap)
Photo 5.13 in ± 0.034 in used
Aero Precision APAR501124: a complete lower with the plain MOE, straight left side, 1000 x 630, harvested
Scale: frame from the reviewed holes takedown, pivot, selector, hammer, trigger (63.3 px/in, rms 0.019 in over 5 points). Read by −y_min in x [-2.6, 1.0] of the traced outline (tools/trace.py); the grip's lowest point (its toe, at the front of the cap)
With the grip's flat top on the receiver's underside (1.072 below the pins: bad-workhorse-lower.grip_mating_y, through its photo's camera since 2026-10-05) it makes the drop 4.06 in against Magpul's 4.0, and the right photo's makes it 3.94: one 0.06 over, the other 0.06 under. Neither is used for the scale (bottom_below_lower_underside adopts Magpul's figure): this entry keeps the disagreement in view.
aero-right and aero-left differ by 0.114 in beyond what each states it is good to.
Aero's two photos of the same product, each framed by five receiver features, agree on the trigger guard's bottom, the magazine well's lip and the tower's top within 0.02 in, and on where the grip sits and how it leans, but not on how far down its toe is: 0.11 in apart. Why isn't known (two lowers, or two views of the cap's edge).
Grip bottom below the receiver's underside where the grip bears4 in ± 0.05 in 101.6 mmConfirmedWorked out: {.receiver_to_bottom}
Worked out 4 in ± 0.05 in used
{.receiver_to_bottom}, harvested
Magpul's "Height, receiver to bottom", taken as from the underside the grip bears on to its lowest point. For the MOE-K2+ the same line on Magpul's page doesn't fit that reading (4.1 against a measured 4.65), so this one is taken because it checks, not because the page defines it.
Worked out 4.058 in ± 0.04 in
{.toe_below_pin_line} + {bad-workhorse-lower.grip_mating_y}, harvested
The plain MOE's toe in Aero's left photo, less the mating surface's 1.072 in below the pins (the Workhorse's underside through its photo's camera, 2026-10-05: 4.034 while a two-pin frame read it 1.096). The right photo's toe makes it 3.94.
The maker's figure for this grip. At this scale the design patent's front view comes to Magpul's 1.2 in thickness and the outline fits the plain MOE in both of Aero's photos; the left photo's toe agrees with it, the right photo's is 0.08 in short.
What the side photo is scaled by: the grip frame's origin (the rear end of its flat top, which bears on the receiver's underside) down to its toe.
Thickness (side to side)1.2 in 30.5 mmConfirmedPublished: Magpul, MOE+ Grip - AR15/M4 (MAG416), the maker, read Oct 1, 2026
Published “Thickness, max 1.2 in.” used
Magpul, MOE+ Grip - AR15/M4 (MAG416), the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
Photo 1.203 in ± 0.03 in
US D600,310 S (Magpul MOE+), FIG. 4 front elevation, 300 dpi, harvested
Scale: scale from magpul-moe-plus.overall_height = 4.664 in (y-extent 958 px → 205.4 px/in). Read by width of the traced outline (tools/trace.py); the patent's front elevation scaled to the traced side's height (orthographic views share it): its widest row
Manufacturer. The design patent's front view, scaled to the side photo's height, comes to the same: two sources that share nothing but the grip.
Seat, X: where the grip's frame origin (on its flat top's line, 0.17 in behind the flat's rear end as traced) sits ahead of the takedown pin, installed-0.255 in ± 0.055 in -6.5 mmCorroboratedPhoto: Aero Precision APAR501124: a complete lower with the plain MOE, straight right side, 1000 x 1000
Photo -0.255 in ± 0.055 in used
Aero Precision APAR501124: a complete lower with the plain MOE, straight right side, 1000 x 1000, harvested
Scale: frame from the reviewed holes takedown, pivot, selector, hammer, trigger (63.7 px/in, rms 0.012 in over 5 points). Read by x of the fitted profile's origin of the traced outline (tools/trace.py); the traced outline's origin (its flat top's rear end), fitted by rotation and translation (at the outline's own scale) to the grip's edges against the background
Photo -0.25 in ± 0.055 in
Aero Precision APAR501124: a complete lower with the plain MOE, straight left side, 1000 x 630, harvested
Scale: frame from the reviewed holes takedown, pivot, selector, hammer, trigger (63.3 px/in, rms 0.019 in over 5 points). Read by x of the fitted profile's origin of the traced outline (tools/trace.py); the traced outline's origin (its flat top's rear end), fitted by rotation and translation (at the outline's own scale) to the grip's edges against the background
Two pin-framed photos of the plain MOE (the MOE+'s shape) on Aero's lower, right and left, agree within 0.005 in; the right one's frame fits its five features closer (0.012 against 0.019 in rms).
A grip's own figure on the standard AR-15 grip mount. Measured on the plain MOE (MAG415): no pin-framed photo of the MOE+ itself was found, and Magpul prints the same angle, height and thickness for both.
The slot in the top that goes over the receiver's lug, across0.425 in ± 0.02 in 10.8 mmProvisionalWorked out: {magpul-moe-k2-plus.lug_slot_width}
Worked out 0.425 in ± 0.02 in used
{magpul-moe-k2-plus.lug_slot_width}, from the site owner
Not measured on an MOE+: no view of its top with a scale is on file. Taken to be the MOE-K2+'s, the same maker's grip for the same lug, read on the user's own (0.425 ± 0.02 against the lug's .375). Stands until a top view of an MOE+ is read.
The front strap's face: how far across the grip its finger ribs run0.72 in ± 0.02 in 18.3 mmProvisionalPhoto: US D600,310 S (Magpul MOE+), FIG. 4 front elevation, 300 dpi
Photo 0.72 in ± 0.02 in used
US D600,310 S (Magpul MOE+), FIG. 4 front elevation, 300 dpi, harvested
Scale: the front elevation's own scale, 205.4 px/in (magpul-moe-plus.overall_height over its 958 px, at which its width is Magpul's 1.2 in). Read by the two columns of ribs together, across the grip: sheet rows 2706 to 2854 (148 px) over columns 760 to 1060; the outline's two strokes are at rows 2658 and 2902
Where the ribs stop the strap rounds into the side. The round is taken as a circular arc, as on the MOE-K2+: no view on file looks along the strap.
The back strap's face: how wide it is before it rounds into the sides0.2 in ± 0.1 in 5.1 mmConflictPhoto: US D600,310 S (Magpul MOE+), FIG. 6 top plan, 300 dpi
Photo 0.2 in ± 0.1 in used
US D600,310 S (Magpul MOE+), FIG. 6 top plan, 300 dpi, harvested
Scale: the plan's own width, 251 px for Magpul's 1.2 in; along the grip the elevations' 205.4 px/in (the plan is 667 px long: 3.25 in, the traced side's 3.24). Read by the outline's width 20, 40, 60 and 100 px from its rear end (sheet rows 929 to 1009): 155, 193, 212 and 229 px, which is 0.74, 0.92, 1.01 and 1.10 in at 0.09, 0.17, 0.26 and 0.44 in from the back strap square to its axis (the plan looks down a strap leaning grip_angle). A round of 0.5 in radius either side of a flat 0.2 in wide has 0.76, 0.96, 1.08 and 1.19 there: within 0.02 in a side over the first 0.2 in and up to 0.05 fuller further round, where the grip goes on widening for an inch. FIG. 7, the bottom plan, has the same outline. ± for that, and for the base's bevel, which is part of the outline's first tenth of an inch
Photo 0.876 in ± 0.02 in
US D600,310 S (Magpul MOE+), FIG. 5 rear elevation, 300 dpi, harvested
Scale: the front elevation's scale on the same sheet, 205.4 px/in: the two elevations are the same 962 px long and 244 px between their outlines' strokes. Read by the ridges' length across the grip: sheet rows 1865 to 2045 (180 px) over columns 1560 to 1860; the outline's two strokes are at rows 1833 and 2077
How far round the ridges run, seen from behind: an upper bound on the flat.
The plan shows the section; the rear elevation shows ridges that wrap a rounded strap, so their length across isn't a flat face's width. A strap flat for 0.88 in would have the plan's rear end at its full width 0.16 in from the end, where the figure has three quarters of it.
plan and ridges differ by 0.676 in beyond what each states it is good to.
Two readings of two things. The sheet's top plan has the outline's rear end, which is the back strap's own section at the heel seen down the grip: nearly a full round. Its rear elevation has how far across the grip the ridges run, and they run on round the strap.
Overall height in the grip frame (the beavertail's top to the toe)4.664 in ± 0.059 in 118.5 mmProvisionalPhoto: Primary Arms MAG416-BLK_00.jpg: the MOE+ alone on white, straight right side, 2000 x 1334
Photo 4.664 in ± 0.059 in used
Primary Arms MAG416-BLK_00.jpg: the MOE+ alone on white, straight right side, 2000 x 1334, harvested
Scale: scale from magpul-moe-plus.bottom_below_lower_underside = 4 in (y from the origin to the far edge 1047 px → 261.7 px/in). Read by height of the traced outline (tools/trace.py); the traced outline's height, the beavertail's top to the toe (what the end section is scaled to)
What the end section from Magpul's design patent is scaled to (orthographic views share their height).
Toe (the grip's lowest point), Y in the grip frame-4 in ± 0.05 in -101.6 mmConfirmedWorked out: -{.bottom_below_lower_underside}
Worked out -4 in used
-{.bottom_below_lower_underside}, harvested
Where the traced end section's toe sits, so it lines up with the side profile's.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
AR-15 grip mount
- Lower receivers
- Aero Precision M4E1 complete lower, A2 grip and M4 stock, Aero Precision M4E1 Stripped Lower Receiver, Battle Arms Development Workhorse stripped lower, BCM MK2 AR-15 Lower Receiver, Bear Creek Arsenal BC-15 Multi Caliber, Lower Receiver, Black Anodized, Geissele Automatics Super Duty AR-15 Lower Receiver - Stripped Lower, Palmetto State Armory AR-15 "Stealth" Stripped Lower Receiver
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Right To Bear $22.75 Black Nov 21, 2026, in stock that day
- Wing Tactical $22.95 Nov 21, 2026, in stock that day
- Primary Arms $23.70 Black Nov 21, 2026, in stock that day
- Magpul $24.95 Nov 21, 2026, stock not said