Grip
B5 Systems Type 23 P-Grip
B5's more upright grip: "an increased vertical grip angle and extended tang to improve ergonomics and ensure proper trigger index". Its front strap leans 13 degrees, its back strap 19; the block's front face runs straight down 1.3 in behind the trigger guard, a beavertail rises behind, and each side has a panel of B5's aggressive texture with a band of it down the front strap. Hollow from below for B5's grip plug, sold separately.

- Weight
- 2.2 oz ± 0.005 oz Conflictpublished: B5 Systems, P-GRIP 23: Features and specs (the page's text under its age overlay), the maker, read Oct 19, 2026Its sources span 2.2 oz to 2.45 oz.
- Lowest price
- $17.78 at Impact Guns, read Nov 21, 2026 (Black)
- Maker's number
- PGR-1122
- Colours
- Black, Flat Dark Earth, Coyote Brown, OD Green, Wolf Grey
- Drawn as
- modelled
- Maker's page
- b5systems.com
In “22RB .22 LR rifle”, a build on the start page, in place of its Magpul MOE-K2+ grip.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Length (B5's: the heel to the block's front face, the flat top level)2.73 in 69.3 mmConfirmedPublished: B5 Systems, P-GRIP 23: Features and specs (the page's text under its age overlay), the maker, read Oct 19, 2026
Published “Length: 2.73 in” used
B5 Systems, P-GRIP 23: Features and specs (the page's text under its age overlay), the maker, read Oct 19, 2026 the page, harvested Oct 19, 2026
B5 doesn't say between what. On B5's two side pictures with the flat top level the silhouette's horizontal extent and its height are 2.73 and 4.84 in at one scale (0.24% apart on the right side, 0.6% on the left): the heel at the back strap's foot to the block's front face.
Height (B5's: the beavertail's top to the toe, the flat top level)4.84 in 122.9 mmConfirmedPublished: B5 Systems, P-GRIP 23: Features and specs (the page's text under its age overlay), the maker, read Oct 19, 2026
Published “Height: 4.84 in” used
B5 Systems, P-GRIP 23: Features and specs (the page's text under its age overlay), the maker, read Oct 19, 2026 the page, harvested Oct 19, 2026
As length: the silhouette's vertical extent on B5's side pictures, the flat top level.
Thickness (side to side; B5's "Width")1.26 in 32 mmConfirmedPublished: B5 Systems, P-GRIP 23: Features and specs (the page's text under its age overlay), the maker, read Oct 19, 2026
Published “Width: 1.26 in” used
B5 Systems, P-GRIP 23: Features and specs (the page's text under its age overlay), the maker, read Oct 19, 2026 the page, harvested Oct 19, 2026
No view on file is square to the grip's front, back or base, so where down the grip it is this wide isn't seen: drawn as the body's width from the shoulder under the block to the base.
Grip angle (the straps' lean from vertical, installed)13°ConfirmedPublished: B5 Systems, P-GRIP 23: Features and specs (the page's text under its age overlay), the maker, read Oct 19, 2026
Published “13° Angle For Improved Ergonomics” used
B5 Systems, P-GRIP 23: Features and specs (the page's text under its age overlay), the maker, read Oct 19, 2026 the page, harvested Oct 19, 2026
Worked out 13.251 deg
{.front_strap_lean}, harvested
The front strap's lean read on B5's right side picture with its flat top level.
B5's own figure, and the front strap's lean on its own pictures with the flat top level agrees with it.
B5's figure is the front strap's lean with the flat top level (front_strap_lean, on B5's own two pictures). The back strap leans more (back_strap_lean): the grip narrows toward its base. The catalog's other grips give the mean of the two straps; this one's mean is about 16.
Front strap's lean from the vertical, the flat top level13.3° ± 0.53°CorroboratedPhoto: B5's PGR-1122_PROFILE_RIGHT (2024/12): the black grip's right side square on, its flat top level, 1400 x 1400 on a transparent ground
Photo 13.251 deg ± 0.527 deg used
B5's PGR-1122_PROFILE_RIGHT (2024/12): the black grip's right side square on, its flat top level, 1400 x 1400 on a transparent ground, harvested
Scale: scale from b5-type-23-p-grip.height = 4.84 in (y-extent 995 px → 205.6 px/in) and b5-type-23-p-grip.length = 2.73 in (x-extent 563 px → 206.2 px/in), which agree within 0.3%; mean 205.9 px/in. Read by angle from the vertical of the straight line through the outline in x [0.3, 1.1] in y [-3.7, -1.8] (1.94 in of it, rms 0.005) of the traced outline (tools/trace.py); the front strap's lean from the vertical with the flat top level: the straight line through the outline's front edge below the tang
Photo 13.034 deg ± 0.577 deg
B5's PGR-1122_PROFILE_LEFT: the black grip's left side square on, its flat top level, harvested
Scale: scale from b5-type-23-p-grip.height = 4.84 in (y-extent 997 px → 206.0 px/in) and b5-type-23-p-grip.length = 2.73 in (x-extent 561 px → 205.5 px/in), which agree within 0.2%; mean 205.7 px/in. Read by angle from the vertical of the straight line through the outline in x [0.3, 1.1] in y [-3.7, -1.8] (1.93 in of it, rms 0.006) of the traced outline (tools/trace.py); as on the right side
B5's right side picture, which the side outline is traced from; its left side picture reads 13.03, within both readings' ±, and B5 says 13 (grip_angle).
Back strap's lean from the vertical, the flat top level18.9° ± 0.42°CorroboratedPhoto: B5's PGR-1122_PROFILE_RIGHT (2024/12): the black grip's right side square on, its flat top level, 1400 x 1400 on a transparent ground
Photo 18.947 deg ± 0.424 deg used
B5's PGR-1122_PROFILE_RIGHT (2024/12): the black grip's right side square on, its flat top level, 1400 x 1400 on a transparent ground, harvested
Scale: scale from b5-type-23-p-grip.height = 4.84 in (y-extent 995 px → 205.6 px/in) and b5-type-23-p-grip.length = 2.73 in (x-extent 563 px → 206.2 px/in), which agree within 0.3%; mean 205.9 px/in. Read by angle from the vertical of the straight line through the outline in x [-1.6, -0.5] in y [-3.6, -1.5] (2.22 in of it, rms 0.004) of the traced outline (tools/trace.py); the back strap's lean from the vertical with the flat top level: the straight line through the outline's rear edge below the beavertail
Photo 18.754 deg ± 0.43 deg
B5's PGR-1122_PROFILE_LEFT: the black grip's left side square on, its flat top level, harvested
Scale: scale from b5-type-23-p-grip.height = 4.84 in (y-extent 997 px → 206.0 px/in) and b5-type-23-p-grip.length = 2.73 in (x-extent 561 px → 205.5 px/in), which agree within 0.2%; mean 205.7 px/in. Read by angle from the vertical of the straight line through the outline in x [-1.6, -0.5] in y [-3.6, -1.5] (2.21 in of it, rms 0.004) of the traced outline (tools/trace.py); as on the right side
B5's right side picture, which the side outline is traced from; its left side picture reads 18.75, within both readings' ±.
Grip bottom below the receiver's underside where the grip bears4.138 in ± 0.02 in 105.1 mmCorroboratedPhoto: B5's PGR-1122_PROFILE_RIGHT (2024/12): the black grip's right side square on, its flat top level, 1400 x 1400 on a transparent ground
Photo 4.138 in ± 0.02 in used
B5's PGR-1122_PROFILE_RIGHT (2024/12): the black grip's right side square on, its flat top level, 1400 x 1400 on a transparent ground, harvested
Scale: scale from b5-type-23-p-grip.height = 4.84 in (y-extent 995 px → 205.6 px/in) and b5-type-23-p-grip.length = 2.73 in (x-extent 563 px → 206.2 px/in), which agree within 0.3%; mean 205.9 px/in. Read by −y_min of the traced outline (tools/trace.py); the toe below the flat top, which bears on the receiver's underside: the traced outline's lowest point, the picture's flat top level as shot
Photo 4.161 in ± 0.02 in
B5's PGR-1122_PROFILE_LEFT: the black grip's left side square on, its flat top level, harvested
Scale: scale from b5-type-23-p-grip.height = 4.84 in (y-extent 997 px → 206.0 px/in) and b5-type-23-p-grip.length = 2.73 in (x-extent 561 px → 205.5 px/in), which agree within 0.2%; mean 205.7 px/in. Read by −y_min of the traced outline (tools/trace.py); as on the right side
B5's right side picture, which the side outline is traced from; its left side picture reads 0.023 deeper, within the two readings' ± together (each is B5's two figures at one scale on its own picture).
The toe below the flat top, on B5's side pictures scaled by B5's length and height. No picture of the grip on a lower with the pins in view was found.
Toe (the grip's lowest point), Y in the grip frame-4.138 in ± 0.02 in -105.1 mmCorroboratedWorked out: -{.bottom_below_lower_underside}
Worked out -4.138 in used
-{.bottom_below_lower_underside}, harvested
The block's front face, ahead of the flat top's rear end1.241 in ± 0.01 in 31.5 mmCorroboratedPhoto: B5's PGR-1122_PROFILE_RIGHT (2024/12): the black grip's right side square on, its flat top level, 1400 x 1400 on a transparent ground
Photo 1.241 in ± 0.01 in used
B5's PGR-1122_PROFILE_RIGHT (2024/12): the black grip's right side square on, its flat top level, 1400 x 1400 on a transparent ground, harvested
Scale: scale from b5-type-23-p-grip.height = 4.84 in (y-extent 995 px → 205.6 px/in) and b5-type-23-p-grip.length = 2.73 in (x-extent 563 px → 206.2 px/in), which agree within 0.3%; mean 205.9 px/in. Read by x_max in y [-1.2, -0.1] of the traced outline (tools/trace.py); the block's front face ahead of the flat top's rear end: the outline's foremost point between the rounded corner above and the tang's foot below (one straight face, 1.3 in deep)
Photo 1.237 in ± 0.01 in
B5's PGR-1122_PROFILE_LEFT: the black grip's left side square on, its flat top level, harvested
Scale: scale from b5-type-23-p-grip.height = 4.84 in (y-extent 997 px → 206.0 px/in) and b5-type-23-p-grip.length = 2.73 in (x-extent 561 px → 205.5 px/in), which agree within 0.2%; mean 205.7 px/in. Read by x_max in y [-1.2, -0.1] of the traced outline (tools/trace.py); as on the right side
B5's right side picture, which the side outline is traced from; its left reads the same within 0.004.
The beavertail's rearmost point, behind the flat top's rear end1.042 in ± 0.01 in 26.5 mmProvisionalPhoto: B5's PGR-1122_PROFILE_RIGHT (2024/12): the black grip's right side square on, its flat top level, 1400 x 1400 on a transparent ground
Photo 1.042 in ± 0.01 in used
B5's PGR-1122_PROFILE_RIGHT (2024/12): the black grip's right side square on, its flat top level, 1400 x 1400 on a transparent ground, harvested
Scale: scale from b5-type-23-p-grip.height = 4.84 in (y-extent 995 px → 205.6 px/in) and b5-type-23-p-grip.length = 2.73 in (x-extent 563 px → 206.2 px/in), which agree within 0.3%; mean 205.9 px/in. Read by −x_min in y [0.05, 1.0] of the traced outline (tools/trace.py); the beavertail's rearmost point behind the flat top's rear end
Seat, X: where the grip's frame origin (its flat top's rear end) sits ahead of the takedown pin, installed-0.066 in ± 0.015 in -1.7 mmCorroboratedWorked out: {std.ar15.receiver_rear_x} + {std.ar15.grip_lug_front_from_rear_face} - {.block_front_x}
Worked out -0.066 in used
{std.ar15.receiver_rear_x} + {std.ar15.grip_lug_front_from_rear_face} - {.block_front_x}, harvested
The block's front face (block_front_x, on the traced side) at the ears' rear face.
Seated by its interface, as BCM's Mod 3 is: the block's front face against the rear face of the trigger guard's ears, where the Army drawing ends the lug (std.ar15.grip_lug_front_from_rear_face from the receiver's rear face). B5's manual draws the grip slid up onto the lower with its block's front face meeting the ears (FIG 2); no picture of it installed with the pins in view was found to read it on.
Top block (the two walls that sit under the receiver) and the beavertail, across0.88 in ± 0.04 in 22.4 mmProvisionalWorked out: An assumption for the drawing, not a reading: the block flush with the receiver's side (std.ar15.lower_body_width, the Army drawing's 0.88), as B5's installation drawing (FIG 2) has it. ± is a step of 0.02 in a side.
Worked out 0.88 in ± 0.04 in used
An assumption for the drawing, not a reading: the block flush with the receiver's side (std.ar15.lower_body_width, the Army drawing's 0.88), as B5's installation drawing (FIG 2) has it. ± is a step of 0.02 in a side., harvested
No view on file is square to the grip's top, front or back. B5's manual draws the block's walls rising into the receiver's sides in one line (FIG 2), as the catalog's other grips' blocks are: taken as the receiver's width.
The slot in the top that goes over the receiver's lug, across0.405 in ± 0.02 in 10.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file looks square at the grip's top. Between the two grips on file whose slot is read (BCM's Mod 3 0.385, Magpul's MOE-K2+ 0.425), so that the lug, the Army drawing's .375, stands clear in it.
Worked out 0.405 in ± 0.02 in used
An assumption for the drawing, not a reading: no view on file looks square at the grip's top. Between the two grips on file whose slot is read (BCM's Mod 3 0.385, Magpul's MOE-K2+ 0.425), so that the lug, the Army drawing's .375, stands clear in it., harvested
No view on file looks at the top square (Rifle Supply's two photos see the top from behind and above, nearly edge on, and show an earlier moulding: two walls with webs between). Drawn between the two grips on file that have it read: BCM's Mod 3, 0.385, and Magpul's MOE-K2+, 0.425.
The shoulder under the block: how far down the strap the grip widens from the block's width to the body's0.4 in ± 0.2 in 10.2 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file is square to the grip's back or front. Ending at the texture panel's top, where B5's pictures have the side flat.
Worked out 0.4 in ± 0.2 in used
An assumption for the drawing, not a reading: no view on file is square to the grip's back or front. Ending at the texture panel's top, where B5's pictures have the side flat., harvested
The back strap's corners in section, their radius0.45 in ± 0.15 in 11.4 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file is square to a section. Rifle Supply's photo from behind and the left has the back strap round across, nearly a half circle of the body's width.
Worked out 0.45 in ± 0.15 in used
An assumption for the drawing, not a reading: no view on file is square to a section. Rifle Supply's photo from behind and the left has the back strap round across, nearly a half circle of the body's width., harvested
The front strap's corners in section, their radius0.25 in ± 0.1 in 6.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file is square to a section. Sportsman's photo from ahead and the right has the front strap flatter than the back, its band of texture turning onto the side round a corner where the groove runs.
Worked out 0.25 in ± 0.1 in used
An assumption for the drawing, not a reading: no view on file is square to a section. Sportsman's photo from ahead and the right has the front strap flatter than the back, its band of texture turning onto the side round a corner where the groove runs., harvested
The grooves round the texture panel and beside the front strap's band, across0.039 in ± 0.01 in 1 mmProvisionalPhoto: B5's PGR-1122_PROFILE_RIGHT, 1400 x 1400
Photo 0.039 in ± 0.01 in used
B5's PGR-1122_PROFILE_RIGHT, 1400 x 1400, harvested
Scale: B5's length and height (205.6 px to the inch). Read by the strap groove's dark line, 4 px across on a gridded crop, taken as its shadowed wall: twice that. ± is a pixel each side.
The strap's groove is a dark line 4 px wide on B5's right side picture at 205.6 px to the inch, 0.019 in: a groove lit from one side is its lit wall beside its shadowed one, and as wide as both (CLAUDE.md, the 22RB's grooves).
The grooves' depth0.02 in ± 0.01 in 0.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows a groove in profile.
Worked out 0.02 in ± 0.01 in used
An assumption for the drawing, not a reading: no view on file shows a groove in profile., harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
AR-15 grip mount
- Lower receivers
- Aero Precision M4E1 complete lower, A2 grip and M4 stock, Aero Precision M4E1 Stripped Lower Receiver, Battle Arms Development Workhorse stripped lower, BCM MK2 AR-15 Lower Receiver, Bear Creek Arsenal BC-15 Multi Caliber, Lower Receiver, Black Anodized, Geissele Automatics Super Duty AR-15 Lower Receiver - Stripped Lower, Palmetto State Armory AR-15 "Stealth" Stripped Lower Receiver
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Impact Guns $17.78 Black Nov 21, 2026, in stock that day
- Primary Arms $19.00 Black Nov 21, 2026, in stock that day
- Sportsman's Warehouse $19.99 Black Nov 21, 2026, in stock that day
- Sportsman's Warehouse $19.99 Wolf Grey Nov 21, 2026, in stock that day
- T.REX ARMS $20.00 Black Nov 21, 2026, in stock that day
- T.REX ARMS $20.00 Coyote Brown Nov 21, 2026, in stock that day
- Sportsman's Warehouse $20.00 OD Green Nov 21, 2026, in stock that day
- Rifle Supply $23.99 Black Nov 21, 2026, out of stock that day