Lower parts kit
Rise Armament Lower parts kit, less trigger

- Weight
- 2.5 oz Conflictpublished: R1 Tactical, a seller, read Sep 30, 2026Its sources span 2.45 oz to 3.12 oz.
- Lowest price
- $44.99 at Right To Bear, read Nov 21, 2026
- Colour
- Black (placeholder)
- Drawn as
- modelled
In “22RB .22 LR rifle”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Takedown pin head diameter0.375 in 9.5 mmConfirmedStandard: US Army TDP drawing 8448584 (Pin, Takedown), sheet 1 of 1; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p103
Standard “.375 DIA (end view)” used
US Army TDP drawing 8448584 (Pin, Takedown), sheet 1 of 1; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p103, from the site owner
Takedown pin head thickness (domed face to the face that seats on the receiver)0.09 in ± 0.005 in 2.3 mmConfirmedStandard: US Army TDP drawing 8448584 (Pin, Takedown), sheet 1 of 1; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p103
Standard “.09” used
US Army TDP drawing 8448584 (Pin, Takedown), sheet 1 of 1; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p103, from the site owner
From the dome's crown to the head's inner face; a .035 relief follows it, inside the receiver.
Pivot pin head diameter0.4 in ± 0.005 in 10.2 mmConfirmedStandard: US Army TDP drawing 8448621 (Pin, Receiver Pivot), sheet 1 of 1; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p102
Standard “.400 DIA -.005 (end view)” used
US Army TDP drawing 8448621 (Pin, Receiver Pivot), sheet 1 of 1; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p102, from the site owner
The head has a flat .1355 ± .0025 from the axis (end view); its orientation in the receiver isn't drawn.
Pivot pin head, its flat from the pin's axis0.136 in ± 0.0025 in 3.4 mmConfirmedStandard: US Army TDP drawing 8448621 (Pin, Receiver Pivot), sheet 1 of 1; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p102
Standard “.1355 ± .0025 from the axis (end view)” used
US Army TDP drawing 8448621 (Pin, Receiver Pivot), sheet 1 of 1; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p102, from the site owner
Which way the flat is turned in the receiver isn't drawn. It is drawn turned to the rear: a forged lower's roll along the top of its magazine well ends square 0.144 in behind the pin's axis (bad-workhorse-lower.well_roll_front_x, bca-stripped-lower's the same), and a round head would stand in that end.
Pivot pin head thickness (domed face to the face that seats on the receiver)0.18 in ± 0.005 in 4.6 mmConfirmedStandard: US Army TDP drawing 8448621 (Pin, Receiver Pivot), sheet 1 of 1; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p102
Standard “.18 (top chain: 1.312 REF = .18 + 1.132)” used
US Army TDP drawing 8448621 (Pin, Receiver Pivot), sheet 1 of 1; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p102, from the site owner
Takedown and pivot pin heads, spherical radius of the domed face0.38 in ± 0.005 in 9.7 mmConfirmedStandard: US Army TDP drawing 8448584 (Pin, Takedown), sheet 1 of 1; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p103; and 8448621 (.38 SPHERICAL R)
Standard “.38 SPHERICAL RADIUS (both drawings)” used
US Army TDP drawing 8448584 (Pin, Takedown), sheet 1 of 1; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p103; and 8448621 (.38 SPHERICAL R), from the site owner
Selector lever hub diameter (face view)0.48 in ± 0.005 in 12.2 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: face view
Standard “.48 DIA” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: face view, from the site owner
Selector pointer tip, from the selector's axis0.34 in ± 0.005 in 8.6 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: face view
Standard “.34 (1.15 REF = .34 + .81)” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: face view, from the site owner
Selector pointer included angle60° ± 2°ConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: face view
Standard “60° INCL ± 2.0°” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: face view, from the site owner
Its flanks blend into the hub with .09 R fillets, which aren't drawn.
Selector paddle width0.25 in ± 0.005 in 6.3 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: face view and View H
Standard “.250 (full R on all stepped serrations)” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: face view and View H, from the site owner
Selector paddle end, from the selector's axis0.81 in ± 0.005 in 20.6 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: face view
Standard “.81 (also .09 + .72 REF)” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: face view, from the site owner
Selector paddle's stepped serrations, top step to the outermost step0.11 in ± 0.005 in 2.8 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1)
Standard “.110 (steps .009, .025, .043, .075, .110 at widths .170 to .250)” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1), from the site owner
Selector lever thickness at the paddle (outer face to the receiver)0.25 in ± 0.005 in 6.3 mmConfirmedStandard: US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1) and the view along the lever, zone D-4
Standard “.250 (View H); 1.010 REF less .760” used
US Army TDP drawing 9381367 (Selector, Fire Control), sheet 1 of 2, rev F; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p65: View H (scale 10/1) and the view along the lever, zone D-4, from the site owner
Missing from 2026-09-30 to 2026-11-03: View H was read here for its serrations alone (selector_serration_height). Read again for CMMG's selector (D86, cmmg-safety-selector.lever_standoff), its six figures across are from one line, the lever's inner face, which bears on the receiver: the top terrace stands .250 off it, and the view along the lever says the same (1.010 REF less .760).
Bolt catch paddle (the serrated lever on the left), rear edge, X3.11 in ± 0.015 in 79 mmProvisionalPhoto: Aero Precision M4A1 clone complete lower, mil-spec LPK, straight left side, 1920 px
Photo 3.11 in ± 0.015 in used
Aero Precision M4A1 clone complete lower, mil-spec LPK, straight left side, 1920 px, harvested
Scale: pin frame from Hough-fitted pin heads: takedown (1781.5, 356.5), pivot (121.5, 362.5) = (0, 0), (6.375, 0): 260.4 px/in; the deck lands at 0.25 (bad-workhorse-lower.deck_above_pin 0.254). Read by the paddle's outline on a 3x crop with a 10 px grid (px 971.7)
Bolt catch paddle, front edge, X3.455 in ± 0.015 in 87.8 mmProvisionalPhoto: Aero Precision M4A1 clone complete lower, mil-spec LPK, straight left side, 1920 px
Photo 3.455 in ± 0.015 in used
Aero Precision M4A1 clone complete lower, mil-spec LPK, straight left side, 1920 px, harvested
Scale: pin frame from Hough-fitted pin heads: takedown (1781.5, 356.5), pivot (121.5, 362.5) = (0, 0), (6.375, 0): 260.4 px/in; the deck lands at 0.25 (bad-workhorse-lower.deck_above_pin 0.254). Read by px 881.7 on the same crop; its centre (3.283) sits over the TDP's plunger hole (8448608 sheet 2, -AK-, 3.2955 by a research agent's reading)
Bolt catch paddle, bottom of its serrated face, Y0.306 in ± 0.015 in 7.8 mmProvisionalPhoto: Aero Precision M4A1 clone complete lower, mil-spec LPK, straight left side, 1920 px
Photo 0.306 in ± 0.015 in used
Aero Precision M4A1 clone complete lower, mil-spec LPK, straight left side, 1920 px, harvested
Scale: pin frame from Hough-fitted pin heads: takedown (1781.5, 356.5), pivot (121.5, 362.5) = (0, 0), (6.375, 0): 260.4 px/in; the deck lands at 0.25 (bad-workhorse-lower.deck_above_pin 0.254). Read by py 280 on the same crop
Bolt catch paddle, top, Y0.774 in ± 0.015 in 19.7 mmProvisionalPhoto: Aero Precision M4A1 clone complete lower, mil-spec LPK, straight left side, 1920 px
Photo 0.774 in ± 0.015 in used
Aero Precision M4A1 clone complete lower, mil-spec LPK, straight left side, 1920 px, harvested
Scale: pin frame from Hough-fitted pin heads: takedown (1781.5, 356.5), pivot (121.5, 362.5) = (0, 0), (6.375, 0): 260.4 px/in; the deck lands at 0.25 (bad-workhorse-lower.deck_above_pin 0.254). Read by py 158 on the same crop; full-round ends top and bottom (TDP 8448628 View E: FULL R 2 PLACES)
Bolt catch plate thickness0.151 in ± 0.003 in 3.8 mmConfirmedStandard: US Army TDP drawing 8448628 (Catch, Bolt), sheet 1 of 1; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p101: main view
Standard “.151 ±.003” used
US Army TDP drawing 8448628 (Catch, Bolt), sheet 1 of 1; user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p101: main view, from the site owner
The plate runs in the lower's slot between the bolt catch bosses (.167 +.010, TDP 8448608 View H-H by a research agent's reading); the paddle is the same plate, so it stands in that slot's plane.
Magazine release button, width (fore and aft)0.3 in 7.6 mmConfirmedStandard: US Army TDP drawing 8448636 (Button, Magazine Catch); user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p14
Standard “.300 BASIC (.150 R ends)” used
US Army TDP drawing 8448636 (Button, Magazine Catch); user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p14, from the site owner
Photo 0.308 in ± 0.012 in
US Marine Corps: M4A1 SOPMOD Block II, straight right side, 7607 px; public domain, harvested
Scale: pin frame from Hough-fitted pin heads: takedown (2303.5, 1092.5), pivot (3478.5, 1078.5) = (0, 0), (6.375, 0): 184.3 px/in. Read by the button's outline on a 4x crop (56.75 px)
The standard; the photo agrees within its ±.
Magazine release button, height0.5 in 12.7 mmConfirmedStandard: US Army TDP drawing 8448636 (Button, Magazine Catch); user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p14
Standard “.500 BASIC” used
US Army TDP drawing 8448636 (Button, Magazine Catch); user-supplied scan (Distribution Statement F, Colt proprietary notice), a copy on file lpk-up-p14, from the site owner
Photo 0.509 in ± 0.012 in
US Marine Corps: M4A1 SOPMOD Block II, straight right side, 7607 px; public domain, harvested
Scale: pin frame from Hough-fitted pin heads: takedown (2303.5, 1092.5), pivot (3478.5, 1078.5) = (0, 0), (6.375, 0): 184.3 px/in. Read by the button's outline on a 4x crop (93.75 px)
The standard; the photo agrees within its ±.
Magazine release button, how far it stands out from the receiver's body0.109 in ± 0.0064 in 2.8 mmProvisionalWorked out: {std.ar15.mag_catch_fence_out} - {std.ar15.lower_body_width} / 2
Worked out 0.109 in used
{std.ar15.mag_catch_fence_out} - {std.ar15.lower_body_width} / 2
Flush with the fence, from the body's face.
Forward Controls Design: 'With a TDP spec magazine shaft and magazine release button, the top of the button is usually flush with the fence' (via blackrifledepot.com). The fence's face is the magazine well walls' (std.ar15.mag_catch_fence_out, 2026-10-03): the button stands out from the body's face to it.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
AR-15 lower parts kit
- Lower receivers
- Aero Precision M4E1 complete lower, A2 grip and M4 stock, Aero Precision M4E1 Stripped Lower Receiver, Battle Arms Development Workhorse stripped lower, BCM MK2 AR-15 Lower Receiver, Bear Creek Arsenal BC-15 Multi Caliber, Lower Receiver, Black Anodized, Geissele Automatics Super Duty AR-15 Lower Receiver - Stripped Lower, Palmetto State Armory AR-15 "Stealth" Stripped Lower Receiver
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Right To Bear $44.99 Nov 21, 2026, in stock that day
- Redcon1 Tactical $44.99 Nov 21, 2026, in stock that day