Magazine
Hexmag AR-15/M4/M16 Magazine Series 2 (30RD)
Hexmag's Series 2 30-round polymer magazine for AR-15/M4/M16 rifles in 5.56 NATO, .223 Remington and .300 Blackout, with its raised hexagon grip (HEXTURE) and an orange follower and HexID latch plate; sold in black, gray, Flat Dark Earth and OD Green.

- Weight
- 4.55 oz Conflictpublished: Hexmag, HEXMAG AR-15/M4/M16 Magazine Series 2 (30RD), Additional information, the maker, read Nov 3, 2026Its sources span 4.54 oz to 24 oz.
- Lowest price
- $8.91 at KYGUNCO, read Nov 21, 2026 (Gray)
- Made for
- CALIBERS: 5.56 X 45 NATO, 223 REMINGTON, 300 AAC BLACKOUT
- Maker's number
- HX30-AR15S2
- Colours
- Black, Gray, Flat Dark Earth, OD Green
- Drawn as
- modelled
In “Two-tone 16 in, Stealth Gray and soft-shooting”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall height, feed lips to base7.366 in ± 0.09 in 187.1 mmProvisionalWorked out: ({std.ar15.magwell_front_inner_x} - {bad-workhorse-lower.magazine_seat_x}) * {.patent_height_px} / {.patent_top_px}
Published “Dimensions 7.5 × 2.66 × 1.125 in”
Hexmag, HEXMAG AR-15/M4/M16 Magazine Series 2 (30RD), Additional information, the maker, read Nov 3, 2026 the page, harvested Nov 3, 2026
Worked out 7.366 in ± 0.09 in used
({std.ar15.magwell_front_inner_x} - {bad-workhorse-lower.magazine_seat_x}) * {.patent_height_px} / {.patent_top_px}
The patent's top section, scale free (patent_top_px over patent_height_px), standing from the seat every lower on file gives a magazine's spine to the well's front wall: the most the magazine can be. The ± is the seat's (0.03, a photo of another magazine seated) and the wall's over the ratio.
What the magazine has to fit: at Hexmag's 7.5 the drawing's top section stands 0.043 in through a standard well's front wall. Hexmag's figure is a half inch's rounding; the two agree within their ±.
Hexmag's page gives "Dimensions 7.5 × 2.66 × 1.125 in" (its markup: depth 7.5, width 2.66, height 1.125 INH), and its 10-round's page the same line, for the same full-length body ("HEXMAG's patented True Riser System inside of a standard sized body"; "10 and 15 round magazines use full length bodies", hexmag.com/polyhex2-magazines/). Read as the height standing upright and laid on the patent's side elevation, it makes the top section 2.576 in from the spine to the front: seated where every lower on file seats a magazine's spine (magazine_seat_x, 0.0195 in ahead of the spine slot's rear wall), its front stood 0.043 in into the well's front wall and its sides 0.005 into the side walls, which a magazine sold for AR-15s can't. The two can't both be true, and what the magazine has to fit decides (2026-11-03, round 2): the scale is the one at which the patent's top section reaches the well's front wall from that seat and no further, 1.8% under Hexmag's figure. Cross-checks at that scale: the top section 0.887 across in a .898 well (0.005 a side) and its body ahead of the spine 2.389 in a 2.398 box; its catch window (1.027 to 0.507 in from the spine) over the lower's catch slot; the catch notch read on Primary Arms' photo of the Series 2 1.057 under the lips, 0.013 from the PMAG 30's 1.07, two magazines fed by one bolt; and the photo's own proportions, its silhouette on the patent's at IoU 0.96 with the scale free (the photo, from a little above, reads the top section 1% shorter for its height, the way an elevated view stretches heights). Hexmag's 7.5 is kept as published: likeliest the height rounded to the half inch (7.366 here; the longest straight line across the magazine, from the lips' rear to the floorplate's front, is 7.4).
The patent's side elevation: its top section's front to back, in the figure's pixels768ProvisionalPhoto: US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left, 300 dpi
Photo 768 count used
US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left, 300 dpi, harvested
Scale: the figure's own pixels. Read by the side outline's greatest reach from the spine's rear face to the front over the top section where it stands in the well (0.4 to 2.55 in under the top: its front face is upright to a pixel, 2.534 to 2.537 in at the adopted scale, and the spine's rear face upright from the rib's top down), ± 1 px
The patent's side elevation: the magazine's height, in the figure's pixels2233ProvisionalPhoto: US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left, 300 dpi
Photo 2233 count used
US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left, 300 dpi, harvested
Scale: the figure's own pixels. Read by the traced outline's y-extent, from the lips' top to the floorplate's lowest point (tools/trace.py's own count)
Body height below the feed-lip blockNo value yetMissingNo source yet
Onboarding checklist: Side view; overall_height minus the feed-lip block when the block is shared across a product line. Not read: the patent's side elevation draws no line where a feed-lip block would end, and nothing here needs it.
Feed-lip block heightNo value yetMissingNo source yet
Onboarding checklist. Not read (as body_height).
Front to back at the body top2.53 in ± 0.036 in 64.3 mmProvisionalPhoto: US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left (the patent's 'right side elevation'), 300 dpi
Photo 2.53 in ± 0.036 in used
US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left (the patent's 'right side elevation'), 300 dpi, harvested
Scale: scale from hexmag-series-2-ar15-30.overall_height = 7.366 in (y-extent 2233 px → 303.1 px/in). Read by width in y [-1.4, -0.7] of the traced outline (tools/trace.py); the top section's front to back, where it stands straight in the well (between the lips' block and the frame's step)
Onboarding checklist: Side view; same calibration as the heights.
Magazine catch notch (left side), its upper edge below the feed lips' top1.057 in ± 0.04 in 26.8 mmCorroboratedPhoto: Primary Arms' photo of HX30-AR15S2-BLK's left side, near straight, a little from behind and above, 5000 px
Photo 1.057 in ± 0.04 in used
Primary Arms' photo of HX30-AR15S2-BLK's left side, near straight, a little from behind and above, 5000 px, harvested
Scale: the photo's silhouette fitted to the patent's FIG. 2, so read in the figure's pixels and at its scale, hexmag-series-2-ar15-30.overall_height = 7.366 in over the figure's 2233 px: 303.1 px/in (profiles.side); y from the top of the lips (row 563.5, the outline's stroke), x from the outline's rearmost point (column 1723, the spine's rear face, mirrored). Read by the catch's window is the darkest thing on that side (luminance under 75 of 255, the pocket 82, the side 108), inside a box picked round it ([2700, 595, 3000, 740]); its 1st percentile down the body is the figure's row 883.8: (883.8 - 563.5) / 303.15. ± the fit (2.8 figure px), the photo's lean from above and the threshold
Photo 1.098 in ± 0.02 in
US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left, 300 dpi, harvested
Scale: hexmag-series-2-ar15-30.overall_height = 7.366 in over the figure's 2233 px: 303.1 px/in (profiles.side); y from the top of the lips (row 563.5, the outline's stroke), x from the outline's rearmost point (column 1723, the spine's rear face, mirrored). Read by the window's upper line (drawn heavy, rows 892 to 901, its middle 896.5) on columns 1460, 1490 and 1520: (896.5 - 563.5) / 303.15; ± half the heavy line's width and a pixel
The design patent the magazine bears, drawn in 2013 for the Series 1; its outline and its panels lie on the Series 2's photo (IoU 0.96).
The product itself, as the PMAGs' are read; the patent's drawing agrees within the two readings' ±.
What seats it: the notch's upper edge hangs on the lower's catch (the `magwell` anchor). Read on the Series 2 itself (Primary Arms' near-straight photo of the left side, through the fit of the patent's silhouette to the photo's) and on the patent's side elevation: 0.041 in apart, inside the two ±. Both at the scale the well gives (overall_height; read again 2026-11-03, round 2: 1.076 and 1.119 at Hexmag's 7.5 in). The photo's reading is 0.013 from the PMAG 30's own (magpul-pmag-30-gen-m3.catch_notch_top, 1.07), as two magazines that feed from one bolt would have it, and seated by it the lips are under the carrier (the test).
Magazine catch notch (left side), its height0.27 in ± 0.02 in 6.9 mmProvisionalPhoto: US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left, 300 dpi
Photo 0.27 in ± 0.02 in used
US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left, 300 dpi, harvested
Scale: hexmag-series-2-ar15-30.overall_height = 7.366 in over the figure's 2233 px: 303.1 px/in (profiles.side); y from the top of the lips (row 563.5, the outline's stroke), x from the outline's rearmost point (column 1723, the spine's rear face, mirrored). Read by the window's upper and lower lines' middles on columns 1460 to 1520: rows 896.5 and 978.5, 82 px. Taller than a lower's catch slot (std.ar15.mag_catch_slot_h, 0.252), as a window the catch comes into is. (On the photo the dark runs on 0.04 in further down, into the shadow under the window's lower edge.)
Magazine catch notch (left side), its rear end ahead of the spine's rear face0.507 in ± 0.02 in 12.9 mmProvisionalPhoto: US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left, 300 dpi
Photo 0.507 in ± 0.02 in used
US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left, 300 dpi, harvested
Scale: hexmag-series-2-ar15-30.overall_height = 7.366 in over the figure's 2233 px: 303.1 px/in (profiles.side); y from the top of the lips (row 563.5, the outline's stroke), x from the outline's rearmost point (column 1723, the spine's rear face, mirrored). Read by the window's rear line on row 940: columns 1565 to 1574, its middle 1569.5: (1723 - 1569.5) / 303.15
On the photo, through the fit, the dark window's rear end reads 0.06 in further back (0.457, its 99th percentile), where the photo looks a little from behind into the window.
Magazine catch notch (left side), its front end ahead of the spine's rear face1.027 in ± 0.02 in 26.1 mmProvisionalPhoto: US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left, 300 dpi
Photo 1.027 in ± 0.02 in used
US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left, 300 dpi, harvested
Scale: hexmag-series-2-ar15-30.overall_height = 7.366 in over the figure's 2233 px: 303.1 px/in (profiles.side); y from the top of the lips (row 563.5, the outline's stroke), x from the outline's rearmost point (column 1723, the spine's rear face, mirrored). Read by the window's front line on row 940: columns 1407 to 1416, its middle 1411.5: (1723 - 1411.5) / 303.15 (the window 0.53 in long)
On the photo, through the fit, 0.997 (its 1st percentile).
The block under the catch notch (left side), standing out of the side0.048 in ± 0.006 in 1.2 mmProvisionalPhoto: US D727,456 S (Hexmag), FIG. 4: the rear elevation, 300 dpi
Photo 0.048 in ± 0.006 in used
US D727,456 S (Hexmag), FIG. 4: the rear elevation, 300 dpi, harvested
Scale: hexmag-series-2-ar15-30.overall_height = 7.366 in over the figure's 2234 px: 303.3 px/in (profiles.rear). Read by row 940: the block's outer line at columns 1068 to 1072 (middle 1070), the side's at 1083 to 1086 (1084.5): 14.5 px
The rear elevation draws a block standing out of the left side under the notch (rows 918 to 985, 1.42 to 1.65 in under the top), its lower end chamfered back into the side; the side elevation draws it as a trapezoid under the window, and the Series 2's photo has it there. As read it would stand 0.05 in into the left wall of a standard well under the catch's slot (std.ar15.magwell_width), as the PMAG's does (magpul-pmag-30-gen-m3.catch_block_proud): not drawn until that is reconciled, and kept here.
The spine: how far its rear face stands behind the body's rear face beside it, in the well0.145 in ± 0.01 in 3.7 mmCorroboratedPhoto: US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left, 300 dpi
Photo 0.145 in ± 0.01 in used
US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left, 300 dpi, harvested
Scale: hexmag-series-2-ar15-30.overall_height = 7.366 in over the figure's 2233 px: 303.1 px/in (profiles.side); y from the top of the lips (row 563.5, the outline's stroke), x from the outline's rearmost point (column 1723, the spine's rear face, mirrored). Read by rows 720 to 1100: the spine's rear line at columns 1720 to 1725 (middle 1722), the body's rear face beside it at 1677 to 1680 (1678, the line the top of the lips' block is on, row 600): 44 px
Photo 0.145 in ± 0.012 in
US D727,456 S (Hexmag), FIG. 6: the top plan, on the sheet with FIG. 7, 300 dpi, harvested
Scale: the drawing's one scale, 303.1 px/in (its side and rear elevations'). Read by the spine's rear end (rows 521 to 525 on columns 1220 and 1260) to the body's rear face beside it (row 565, columns 1118 to 1169 and 1300 to 1347): 44 px
The plan of the same drawing.
The figure the side outline is traced from; the plan agrees to the pixel.
The spine is what stands in the well's slot for it (std.ar15.magwell_spine_slot_width; the slot is std.ar15.magwell_length - std.ar15.magwell_box_length, 0.155, deep). Two figures of the one drawing, which has its views at one scale (FIG. 2 303.1, FIG. 4 303.3 px/in).
The spine's width, where it stands in the well's slot0.457 in ± 0.01 in 11.6 mmProvisionalPhoto: US D727,456 S (Hexmag), FIG. 4: the rear elevation, 300 dpi
Photo 0.457 in ± 0.01 in used
US D727,456 S (Hexmag), FIG. 4: the rear elevation, 300 dpi, harvested
Scale: hexmag-series-2-ar15-30.overall_height = 7.366 in over the figure's 2234 px: 303.3 px/in (profiles.rear). Read by rows 700, 800 and 1000: the two lines either side of the middle (column 1219.5) at 1150.5 and 1289, 138.5 px: the pair whose spacing is the slot's (the others: 1139.5 and 1301, 161.5 px; 1178.5 and 1261.5, 83 px)
Under the well's slot for it, std.ar15.magwell_spine_slot_width (0.47).
The spine's upper end below the top of the lips0.476 in ± 0.01 in 12.1 mmProvisionalPhoto: US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left, 300 dpi
Photo 0.476 in ± 0.01 in used
US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left, 300 dpi, harvested
Scale: hexmag-series-2-ar15-30.overall_height = 7.366 in over the figure's 2233 px: 303.1 px/in (profiles.side); y from the top of the lips (row 563.5, the outline's stroke), x from the outline's rearmost point (column 1723, the spine's rear face, mirrored). Read by column 1722, the spine's rear line, is ink from row 708 to row 1188: (708 - 563.5) / 303.15; above it the rear is the lips' block, at the body's rear face
The spine's lower end below the top of the lips, where the bars down the rear begin2.061 in ± 0.01 in 52.3 mmProvisionalPhoto: US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left, 300 dpi
Photo 2.061 in ± 0.01 in used
US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left, 300 dpi, harvested
Scale: hexmag-series-2-ar15-30.overall_height = 7.366 in over the figure's 2233 px: 303.1 px/in (profiles.side); y from the top of the lips (row 563.5, the outline's stroke), x from the outline's rearmost point (column 1723, the spine's rear face, mirrored). Read by column 1722 is ink to row 1188: (1188 - 563.5) / 303.15
The gripping section's upper edge at the rear, below the top of the lips (where the sides step out)2.77 in ± 0.04 in 70.4 mmProvisionalPhoto: US D727,456 S (Hexmag), FIG. 4: the rear elevation, 300 dpi
Photo 2.77 in ± 0.04 in used
US D727,456 S (Hexmag), FIG. 4: the rear elevation, 300 dpi, harvested
Scale: hexmag-series-2-ar15-30.overall_height = 7.366 in over the figure's 2234 px: 303.3 px/in (profiles.rear). Read by the rear outline's step from the top section's width to the gripping section's: from y -2.758 to -2.882 on the left, -2.795 to -2.875 on the right (profiles.rear); its middle
The HEXTURE panels on each side's main field28ProvisionalPhoto: US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left, 300 dpi
Photo 28 count used
US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left, 300 dpi, harvested
Scale: a count. Read by the lattice's cells with a panel in them (profiles.side features.hexes; FIG. 3, profiles.right, has the same 28 cells mirrored)
Counted on the patent's two side elevations, each panel a cell of one honeycomb, and on the Series 2's photo of its left side, where every one of them lies. Fourteen are whole hexagons; the rest are cut short at the front strip, the spine and the floorplate. Two more in the channel down the front of the upper body (hex_panels_front).
The HEXTURE panels in the channel down the front of the upper body, each side2ProvisionalPhoto: US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left, 300 dpi
Photo 2 count used
US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left, 300 dpi, harvested
Scale: a count. Read by under the stripper-clip guides: a pentagon and a panel cut short by the channel's lines (profiles.side features.hexes_front), as the Series 2's photos have them
The groove between two HEXTURE panels, its width0.081 in ± 0.01 in 2.1 mmProvisionalPhoto: US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left, 300 dpi
Photo 0.081 in ± 0.01 in used
US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left, 300 dpi, harvested
Scale: hexmag-series-2-ar15-30.overall_height = 7.366 in over the figure's 2233 px: 303.1 px/in (profiles.side); y from the top of the lips (row 563.5, the outline's stroke), x from the outline's rearmost point (column 1723, the spine's rear face, mirrored). Read by the lattice's spacing (201.0 px) less a panel's width across its flats, its outline's middle (twice 85.3 px of white inside a full hexagon, plus the line's half each side: 176.6 px): 24.4 px
The HEXTURE panels: how far they stand out of the groove between them0.03 in ± 0.015 in 0.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows a panel's edge in profile.
Worked out 0.03 in ± 0.015 in used
An assumption for the drawing, not a reading: no view on file shows a panel's edge in profile., harvested
KYGUNCO's words for it: "Its lightweight composite body features a raised hexagon grip pattern". No view on file has a panel's edge in profile: the rear elevation's sides carry a second line 13 to 14 px (0.045 in) inside the silhouette over the gripping section, which may be the groove's floor or the spine strip's edge; the photos show the grooves as a lit and a dark wall a few hundredths across.
The stripper-clip guides: how deep their two wedges are sunk0.04 in ± 0.02 in 1 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows the guides in profile.
Worked out 0.04 in ± 0.02 in used
An assumption for the drawing, not a reading: no view on file shows the guides in profile., harvested
The follower's top, as much of it as the model draws between the lips0.06 in ± 0.03 in 1.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: the model is solid, and the follower is drawn as the top of it between the lips, this thick; no view on file shows the follower in section.
Worked out 0.06 in ± 0.03 in used
An assumption for the drawing, not a reading: the model is solid, and the follower is drawn as the top of it between the lips, this thick; no view on file shows the follower in section., harvested
The HexID latch plate in the floorplate: its hexagon across its corners0.474 in ± 0.02 in 12 mmProvisionalPhoto: US D727,456 S (Hexmag), FIG. 7: the bottom plan, 300 dpi
Photo 0.474 in ± 0.02 in used
US D727,456 S (Hexmag), FIG. 7: the bottom plan, 300 dpi, harvested
Scale: the floorplate's own width in the same view, hexmag-series-2-ar15-30.floorplate_width (1.105 in over its 320 px, columns 1065 to 1385). Read by the hexagon's two corners on row 2165, columns 1155 and 1295: 140 px; it stands at the middle of the floorplate's length (its middle 15 px behind the floorplate's, of 680)
The HexID latch plate: how deep its pocket is in the floorplate0.05 in ± 0.03 in 1.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: the plate is drawn flush in a pocket this deep; no view on file shows it in section.
Worked out 0.05 in ± 0.03 in used
An assumption for the drawing, not a reading: the plate is drawn flush in a pocket this deep; no view on file shows it in section., harvested
Hang below the magwell when seated4.676 in ± 0.15 in 118.8 mmProvisionalWorked out: {bad-workhorse-lower.magwell_bottom_center_y} - ({std.ar15.mag_catch_slot_bottom_y} + {std.ar15.mag_catch_slot_h} + {.catch_notch_top} - {.overall_height})
Worked out 4.676 in ± 0.15 in used
{bad-workhorse-lower.magwell_bottom_center_y} - ({std.ar15.mag_catch_slot_bottom_y} + {std.ar15.mag_catch_slot_h} + {.catch_notch_top} - {.overall_height})
From the well's mouth at its middle down to the floorplate's lowest point, hung by its notch on the catch's upper face (the Army drawing's slot), in the one lower on file whose mouth is measured, the Workhorse (as the PMAGs' are). A check on the seat, not what seats it.
Length as the manufacturer states it (reference points undefined)No value yetMissingNo source yet
Onboarding checklist. Hexmag's page states no length apart from its three sizes (overall_height, stated_front_to_back, stated_width). Shiner's page says "Length 8.6500" with no unit and no reference: not taken.
Hexmag's second size, 2.66 in (its markup's "width"): what it spans is not stated2.66 in 67.6 mmConfirmedPublished: Hexmag, HEXMAG AR-15/M4/M16 Magazine Series 2 (30RD), Additional information (markup: "width":{"unitCode":"INH","value":"2.66"}), the maker, read Nov 3, 2026
Published “Dimensions 7.5 × 2.66 × 1.125 in” used
Hexmag, HEXMAG AR-15/M4/M16 Magazine Series 2 (30RD), Additional information (markup: "width":{"unitCode":"INH","value":"2.66"}), the maker, read Nov 3, 2026 the page, harvested Nov 3, 2026
Hexmag's third size, 1.125 in (its markup's "height"): what it spans is not stated1.125 in 28.6 mmConfirmedPublished: Hexmag, HEXMAG AR-15/M4/M16 Magazine Series 2 (30RD), Additional information (markup: "height":{"unitCode":"INH","value":"1.125"}), the maker, read Nov 3, 2026
Published “Dimensions 7.5 × 2.66 × 1.125 in” used
Hexmag, HEXMAG AR-15/M4/M16 Magazine Series 2 (30RD), Additional information (markup: "height":{"unitCode":"INH","value":"1.125"}), the maker, read Nov 3, 2026 the page, harvested Nov 3, 2026
The spine's rear face where the top section stands in the well, ahead of the side outline's rearmost point0 in ± 0.02 in 0 mmProvisionalPhoto: US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left (the patent's 'right side elevation'), 300 dpi
Photo 0 in ± 0.02 in used
US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left (the patent's 'right side elevation'), 300 dpi, harvested
Scale: scale from hexmag-series-2-ar15-30.overall_height = 7.366 in (y-extent 2233 px → 303.1 px/in). Read by x_min in y [-1.4, -0.7] of the traced outline (tools/trace.py); the spine's rear face where the top section stands in the well, ahead of the outline's rearmost point
The top section's width, where it stands in the well0.887 in ± 0.02 in 22.5 mmProvisionalPhoto: US D727,456 S (Hexmag), FIG. 4: the rear elevation (the magazine's left on the viewer's left), 300 dpi
Photo 0.887 in ± 0.02 in used
US D727,456 S (Hexmag), FIG. 4: the rear elevation (the magazine's left on the viewer's left), 300 dpi, harvested
Scale: scale from hexmag-series-2-ar15-30.overall_height = 7.366 in (y-extent 2234 px → 303.3 px/in). Read by width in y [-1.6, -0.9] of the traced outline (tools/trace.py); the top section's width where it stands in the well, under the lips and over the catch's block and the frame's step
The gripping section's width, over its HEXTURE panels0.94 in ± 0.02 in 23.9 mmProvisionalPhoto: US D727,456 S (Hexmag), FIG. 4: the rear elevation (the magazine's left on the viewer's left), 300 dpi
Photo 0.94 in ± 0.02 in used
US D727,456 S (Hexmag), FIG. 4: the rear elevation (the magazine's left on the viewer's left), 300 dpi, harvested
Scale: scale from hexmag-series-2-ar15-30.overall_height = 7.366 in (y-extent 2234 px → 303.3 px/in). Read by width in y [-6.0, -3.5] of the traced outline (tools/trace.py); the gripping section's width over the HEXTURE panels, above the floorplate
The floorplate's width, its widest1.085 in ± 0.02 in 27.6 mmProvisionalPhoto: US D727,456 S (Hexmag), FIG. 4: the rear elevation (the magazine's left on the viewer's left), 300 dpi
Photo 1.085 in ± 0.02 in used
US D727,456 S (Hexmag), FIG. 4: the rear elevation (the magazine's left on the viewer's left), 300 dpi, harvested
Scale: scale from hexmag-series-2-ar15-30.overall_height = 7.366 in (y-extent 2234 px → 303.3 px/in). Read by width in y [-7.45, -7.0] of the traced outline (tools/trace.py); the floorplate's width, its widest
The floorplate: from the joint along its upper edge down to its underside, measured upright0.31 in ± 0.01 in 7.9 mmProvisionalPhoto: US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left, 300 dpi
Photo 0.31 in ± 0.01 in used
US D727,456 S (Hexmag, 'Ammunition magazine'), FIG. 2: the side with the catch notch, the magazine's left, 300 dpi, harvested
Scale: hexmag-series-2-ar15-30.overall_height = 7.366 in over the figure's 2233 px: 303.1 px/in (profiles.side). Read by the joint's upper line and the underside's line on columns 760, 900, 1100 and 1300: rows 2511.5 and 2605, 2550 and 2644, 2605.5 and 2702.5, 2660 and 2757.5: 93.5, 94, 97 and 97.5 px, their mean 95.5 less a stroke's half at the underside (the outline is inset 2 px)
The side elevation draws the floorplate under a pair of lines along the joint, 20 px apart (the body's rim, then the floorplate's own upper edge), both leaning as the underside does (15.4 and 15.8 degrees); from the upper one, where the body ends, to the underside. The joint is taken as a line that far above the side outline's underside, parallel to it.
The name block on the right side: how deep its panel is sunk0.01 in ± 0.01 in 0.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows the panel in profile; Primary Arms' photo of the right side has its edge as a thin lit line under a dark one, as a shallow sunk panel's.
Worked out 0.01 in ± 0.01 in used
An assumption for the drawing, not a reading: no view on file shows the panel in profile; Primary Arms' photo of the right side has its edge as a thin lit line under a dark one, as a shallow sunk panel's., harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
AR-15 magazine well
- Lower receivers
- Aero Precision M4E1 complete lower, A2 grip and M4 stock, Aero Precision M4E1 Stripped Lower Receiver, Battle Arms Development Workhorse stripped lower, BCM MK2 AR-15 Lower Receiver, Bear Creek Arsenal BC-15 Multi Caliber, Lower Receiver, Black Anodized, Geissele Automatics Super Duty AR-15 Lower Receiver - Stripped Lower, Palmetto State Armory AR-15 "Stealth" Stripped Lower Receiver
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- KYGUNCO $8.91 Gray Nov 21, 2026, in stock that day
- Midwest Gun Works $8.99 Black Nov 21, 2026, in stock that day
- Primary Arms $11.99 Black Nov 21, 2026, in stock that day
- Primary Arms $11.99 Flat Dark Earth Nov 21, 2026, in stock that day
- Primary Arms $11.99 OD Green Nov 21, 2026, in stock that day