Barrel
BCM Standard 16" Mid Length Barrel, Stripped
Bravo Company's 16 in government-profile barrel, stripped: MIL-B-11595E chrome moly vanadium steel, a chrome lined 5.56 NATO chamber and bore, 1/7 twist, manganese phosphate, a mid-length gas port drilled and dimpled on a .750 in journal, an M4 feed ramp extension, a 1/2-28 muzzle thread.

- Weight
- 28 oz ± 1 oz Confirmedpublished: BCM, BCM Standard 16" Mid Length Barrel, Stripped (BCM-BRL-s-MID-16-STD), Description, the maker, read Oct 5, 2026
- Lowest price
- $279.00 at BCM, read Nov 21, 2026
- Made for
- 5.56 NATO Chambers
- Maker's number
- BCM-BRL-s-MID-16-STD
- Colour
- Manganese phosphate, charcoal
- Drawn as
- modelled
- Maker's page
- bravocompanyusa.com
In “BCM 16 in mid-length”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Barrel length as its maker states it16 in ± 0.1 in 406.4 mmConfirmedPublished: BCM, BCM Standard 16" Mid Length Barrel, Stripped (BCM-BRL-s-MID-16-STD), Description, the maker, read Oct 5, 2026
Published “These are stripped 16" Mid Length Standard 11595E barrels with gas ports installed and dimpled for a strong gas block installation.” used
BCM, BCM Standard 16" Mid Length Barrel, Stripped (BCM-BRL-s-MID-16-STD), Description, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Barrel Length 16”
Primary Arms, Bravo Company Manufacturing Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Government - 16" (BCM-BRL-S-MID-16-STD), Specifications, a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
The maker's own; the seller repeats it.
The nominal length. BCM's page doesn't say between which points; the Army's barrel drawing (8448549) dimensions a barrel from its breech end, inside the extension, to its muzzle, and overall_length takes it so.
The gas block journal's diameter0.75 in ± 0.0005 in 19 mmConfirmedPublished: BCM, BCM Standard 16" Mid Length Barrel, Stripped (BCM-BRL-s-MID-16-STD), Description, the maker, read Oct 5, 2026
Published “(.750) at Gas Block location” used
BCM, BCM Standard 16" Mid Length Barrel, Stripped (BCM-BRL-s-MID-16-STD), Description, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “.750" gas seat diameter”
Primary Arms, Bravo Company Manufacturing Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Government - 16" (BCM-BRL-S-MID-16-STD), Features, a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
The maker's own; the seller repeats it.
The barrel extension's rear end behind the barrel's breech end0.501 in ± 0.01 in 12.7 mmProvisionalWorked out: {std.ar15.barrel_extension_behind_breech}
Worked out 0.501 in ± 0.01 in used
{std.ar15.barrel_extension_behind_breech}, from the site owner
The reference CAD set's extension, 1.121 from its front face to its rear end, less the Army's .620 tenon: both readings and their sources are in the standard's ledger (std.ar15.barrel_extension_length, std.ar15.barrel_tenon_length) since 2026-10-05; until then the reading was kept here.
The extension's length less the barrel's tenon, which screws into it from its front face (8448549 sheet 1: .620 ± .001). The extension's own drawing (8448550) isn't in the package, so its length is the reference CAD set's. The Aero barrel's ledger scaled it off 8448548's 1/1 view at 0.46 ± 0.04: the two agree within that. Since 2026-10-05 this is the one figure the catalog's three 5.56 barrels take their breech from (the standard's, `std.ar15.barrel_extension_behind_breech`, which the Aero barrel's ledger and Bear Creek's read too): they had 0.46, 0.501 and 0.57, and their muzzles stood 0.11 in apart. A check of the CAD set's extension against the Army's own figures: its locking lugs' front faces are 0.907 behind its front face (extension_lug_depth: 1.121 less 0.214), where the barrel's .620 tenon and the assembly drawing's .283 +.006 from the locking face to the breech face (8448548, Section A-A) make .903 to .909.
End to end, the extension's rear to the muzzle16.501 in ± 0.07 in 419.1 mmConflictWorked out: {.length} + {.extension_behind_breech}
Photo 16.91 in ± 0.06 in
Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, the muzzle at the right, 4848 x 3232, harvested
Scale: its gas block journal's diameter, 202.55 px (columns 2910 to 3370, the silhouette at grey 200), as the published .750 (journal_od): 270.07 px/in. Read by its two end faces, each behind its rim's arc: the rear end's at column 149.1 (the rim an ellipse 30 px deep by 134 high: the lens sees that end from 12.7° off square), the muzzle's at 4717 (the tip at 4738, a 20 px arc): 4567.9 px
Worked out 16.501 in ± 0.07 in used
{.length} + {.extension_behind_breech}, harvested
Lengths at the published length's scale: the journal's (a black tube's width on white) reads 2.5% short, and at the published one the gas port lands where the Aero barrel's and a mid-length chart's are, and the muzzle shoulder where BCM's photo of the complete upper has it.
photo and published differ by 0.409 in beyond what each states it is good to.
The photo, at its journal's scale, reads 2.5% longer than the published length gives: a black tube reads thin on white (CLAUDE.md; the Aero barrel's photo did the same by 2.8% with its edge read at mid-grey, and reads within 0.3% at 235), so the diameter's scale is short and lengths read long by it. The published length is the scale for lengths, the journal the scale for diameters. Checks at the published scale: the gas port lands 9.13 ahead of the receiver's face (the Aero barrel's 9.17 and Bear Creek's 9.14 by their own photos; a mid-length chart's 9.18), and BCM's photo of its complete upper with this barrel has the muzzle device beginning 0.455 in ahead of the 15 in handguard's front end (shoulder_x's second measurement): 15.03, as here, not the 15.4 the journal's scale would make it. The ± covers whether the 16 is from the barrel's breech end (the Army's drawing) or from the bolt's face, an eighth further back.
The barrel extension's rear end, from the flange's rear face (negative: inside the receiver)-0.984 in ± 0.02 in -25 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, the muzzle at the right, 4848 x 3232
Photo -0.984 in ± 0.02 in used
Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, the muzzle at the right, 4848 x 3232, harvested
Scale: its end faces, 4567.9 px apart (columns 149.1 and 4717, each behind its rim's arc), as overall_length (16.501): 276.83 px/in. Read by the rear end's face (column 149.1) to the flange's rear face (column 421.6: where the flange's lower edge reaches its full depth; before it the edge is the rim's arc, an ellipse 32.9 px deep fitted over columns 406 to 420)
The reference CAD set's extension has 0.990 here (1.121 less its 0.131 flange).
The extension flange's front face, ahead of its rear face (the flange's thickness)0.095 in ± 0.015 in 2.4 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, the muzzle at the right, 4848 x 3232
Photo 0.095 in ± 0.015 in used
Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, the muzzle at the right, 4848 x 3232, harvested
Scale: its end faces, 4567.9 px apart (columns 149.1 and 4717, each behind its rim's arc), as overall_length (16.501): 276.83 px/in. Read by the flange's rear face (column 421.6) to where its upper edge stops being level (column 448)
The reference CAD set's flange is 0.131 thick; this one reads thinner. Ahead of the face the silhouette's corner is the rim's far arc, seen past the barrel (to column 466).
The barrel extension's flange, its diameter as the side photo has it at the journal's scale1.185 in ± 0.007 in 30.1 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, the muzzle at the right, 4848 x 3232
Photo 1.185 in ± 0.007 in used
Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, the muzzle at the right, 4848 x 3232, harvested
Scale: its gas block journal's diameter as the published .750 (tools/turned.py at grey 200: ratio 1.5804). Read by the silhouette's widest, columns 424 to 444: 160.03 px of radius against the journal's 101.26
The scale reference of the traced outline (the silhouette's greatest height). The photo's breech end stands a little nearer the lens than its journal (extension_od: 1.2% large there), so the flange itself is nearer 1.171; the reference CAD set's is 1.170.
The barrel extension's body, its diameter (what goes into the receiver)0.999 in ± 0.001 in 25.4 mmConflictStandard: US Army TDP drawing 8448548 (Barrel and Barrel Extension Assembly), rev N: the assembly's side view at 1/1; user-supplied scan, PDF page 212
Standard “DIAMETER NOT TO EXCEED .9990 FOR THIS LENGTH AFTER ASSEMBLY AND BEFORE FINISH” used
US Army TDP drawing 8448548 (Barrel and Barrel Extension Assembly), rev N: the assembly's side view at 1/1; user-supplied scan, PDF page 212, from the site owner
An upper limit: it goes into the receiver's 1.000 bore (8448524). The reference CAD set's extension is .9987.
Photo 1.011 in ± 0.007 in
Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, the muzzle at the right, 4848 x 3232, harvested
Scale: its gas block journal's diameter as the published .750 (tools/turned.py at grey 200: ratio 1.3482). Read by the extension's body, columns 170 to 335: 136.52 px of radius against the journal's 101.26
The drawing's limit: an extension over 1.000 doesn't go into a receiver. The photo reads 1.2% large here because its breech end is nearer the lens than its journal.
tdp and photo differ by 0.012 in beyond what each states it is good to.
The photo's reading says how square the photo is, not how big the extension is: the breech end is nearer the lens than the journal by about 1.2% (the arcs its seams make put the lens about 31 in off, opposite a point 7 in ahead of the receiver's face). The outline is not corrected for it: diameters behind the journal read up to 1.2% large, ahead of it up to 0.7% small.
The gas port ahead of the extension's face9.13 in ± 0.05 in 231.9 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, the muzzle at the right, 4848 x 3232
Photo 9.13 in ± 0.05 in used
Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, the muzzle at the right, 4848 x 3232, harvested
Scale: its end faces, 4567.9 px apart (columns 149.1 and 4717, each behind its rim's arc), as overall_length (16.501): 276.83 px/in. Read by the flange's rear face (column 421.6) to the middle of the port's mouth on the upper edge and of the dimple's dent on the lower (column 2949)
BCM says "gas ports installed and dimpled" and gives no distance. The port is on top in the photo, in line with the marking (as 8448548's note 8 has markings): its mouth breaks the upper edge at columns 2935 to 2965, and the dimple opposite it dents the lower edge over 2926 to 2972. That is 0.28 ahead of the journal's rear shoulder (8448548 has .295 on the rifle's barrel; a mid-length chart .300). Checks: the Aero barrel's port is at 9.17 and Bear Creek's at 9.14; the chart in the TDP's folder (AR-15_M4_Barrel_Dimensions.jpg, a third-party illustration) puts a mid-length port 9.050 ahead of the extension's front face, 9.18 from this one with the reference CAD's 0.131 flange.
The gas block journal's rear shoulder (the collar's front face) ahead of the extension's face8.848 in ± 0.03 in 224.7 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, the muzzle at the right, 4848 x 3232
Photo 8.848 in ± 0.03 in used
Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, the muzzle at the right, 4848 x 3232, harvested
Scale: its end faces, 4567.9 px apart (columns 149.1 and 4717, each behind its rim's arc), as overall_length (16.501): 276.83 px/in. Read by the flange's rear face (column 421.6) to where the collar's edge ends (column 2871: the ends of the arc its front face's groove makes)
A gas block's rear face comes back to this shoulder. The Aero barrel's is at 8.87 and Bear Creek's at 8.85.
The gas block journal's front end (where the barrel steps down) ahead of the extension's face10.716 in ± 0.03 in 272.2 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, the muzzle at the right, 4848 x 3232
Photo 10.716 in ± 0.03 in used
Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, the muzzle at the right, 4848 x 3232, harvested
Scale: its end faces, 4567.9 px apart (columns 149.1 and 4717, each behind its rim's arc), as overall_length (16.501): 276.83 px/in. Read by the flange's rear face (column 421.6) to the step ahead of the journal (column 3388: the ends of the arc the step makes)
The journal is 1.87 long: long enough for a front sight base's two bands.
The muzzle shoulder ahead of the extension's face15.014 in ± 0.03 in 381.4 mmCorroboratedPhoto: Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, the muzzle at the right, 4848 x 3232
Photo 15.014 in ± 0.03 in used
Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, the muzzle at the right, 4848 x 3232, harvested
Scale: its end faces, 4567.9 px apart (columns 149.1 and 4717, each behind its rim's arc), as overall_length (16.501): 276.83 px/in. Read by the flange's rear face (column 421.6) to the shoulder's face where it meets the thread, on the silhouette's edges (column 4578; the arc the thread's root makes against the face ends at 4575.3)
Photo 15.03 in ± 0.07 in
BCM's gallery: its complete upper with this barrel under the 15 in MCMR handguard, from the right, an A2 flash hider on the muzzle, 1500 x 1000, harvested
Scale: its top rail's teeth, 21.215 px apart along the handguard (std.picatinny.slot_pitch): 53.85 px/in. Read by the bare barrel between the handguard's foremost point (column 1316) and where the muzzle device and its washer begin (column 1341): 0.455 in, ahead of the handguard's front end as that part's ledger has it on 2026-10-05 (bcm-mcmr-15-handguard.rear_x -0.4225 + length 15: 14.578)
Another photo, another scale, another part's figures: the ± is two pixels and the handguard's own.
The barrel's own photo, at five times the resolution; BCM's photo of the complete upper puts the shoulder within 0.02 of it.
Where the thread begins: a muzzle device or its washer seats here. The corner behind it is rounded in the outline, partly by the rim's arc (the lens sees the muzzle end from 16° off square).
The muzzle thread's length0.502 in ± 0.04 in 12.8 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, the muzzle at the right, 4848 x 3232
Photo 0.502 in ± 0.04 in used
Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, the muzzle at the right, 4848 x 3232, harvested
Scale: its end faces, 4567.9 px apart (columns 149.1 and 4717, each behind its rim's arc), as overall_length (16.501): 276.83 px/in. Read by the shoulder's face (column 4578) to the muzzle's face (column 4717, behind its rim's 20 px arc)
Shorter than the Army's .63 (8448549 sheet 1, from the shoulder to the muzzle; a mid-length chart has .624), by this photo. The thread's own pitch reads 9.204 px, 257.7 px/in at 28 to the inch, where this scale would have 9.8 px: by the thread as the ruler the muzzle end reads 6% short and the thread is 0.54. Not explained (see the part's gaps), and the ± says so.
The diameter behind the muzzle thread0.687 in ± 0.008 in 17.4 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, the muzzle at the right, 4848 x 3232
Photo 0.687 in ± 0.008 in used
Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, the muzzle at the right, 4848 x 3232, harvested
Scale: its gas block journal's diameter as the published .750 (tools/turned.py at grey 200: ratio 0.9161). Read by the section behind the shoulder, columns 4440 to 4555: 92.77 px of radius against the journal's 101.26
The last section before the shoulder (0.59 long). The section behind it, from the journal's front end, is 0.716, narrowing to 0.709.
The gas port's diameter0.075 in ± 0.01 in 1.9 mmProvisionalPublished: AR-15_M4_Barrel_Dimensions.jpg in the user's TDP folder (Spec_Sheets): a third-party illustration of a 14.5 in mid-length barrel, no drawing number, a page
Published “0.075"ø Gas Port” used
AR-15_M4_Barrel_Dimensions.jpg in the user's TDP folder (Spec_Sheets): a third-party illustration of a 14.5 in mid-length barrel, no drawing number, a page
BCM publishes none. A mid-length chart's figure, for the hole the model cuts; the rifle's (8448548) is .092.
The bore's diameter (across the lands)0.219 in ± 0.001 in 5.6 mmConfirmedStandard: US Army TDP drawing 8448549 (Barrel), sheet 2 of 2, rev J: Section U-U, rifling detail at 10/1; user-supplied scan, PDF page 211
Standard “.219 DIA+.001” used
US Army TDP drawing 8448549 (Barrel), sheet 2 of 2, rev J: Section U-U, rifling detail at 10/1; user-supplied scan, PDF page 211, from the site owner
The barrel indexing pin's diameter0.125 in ± 0.002 in 3.2 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec part
Model 0.125 in ± 0.002 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec part, from the site owner
Read by its one cylinder, radius .0625, .185 long
The pin's own drawing (8448551, PDF page 119) wasn't read. In the photo the pin shows 31 px of its width (0.11) before the flange's corner hides its front.
The barrel indexing pin's axis behind the flange's rear face0.113 in ± 0.015 in 2.9 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, the muzzle at the right, 4848 x 3232
Photo 0.113 in ± 0.015 in used
Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, the muzzle at the right, 4848 x 3232, harvested
Scale: its end faces, 4567.9 px apart (columns 149.1 and 4717, each behind its rim's arc), as overall_length (16.501): 276.83 px/in. Read by the pin's rear edge on the upper silhouette (column 373) plus half index_pin_d, to the flange's rear face (column 421.6)
0.208 behind the flange's front face, as the reference CAD set has it (0.2075).
The barrel indexing pin's top above the bore's axis0.584 in ± 0.01 in 14.8 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, the muzzle at the right, 4848 x 3232
Photo 0.584 in ± 0.01 in used
Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, the muzzle at the right, 4848 x 3232, harvested
Scale: its gas block journal's diameter as the published .750 (tools/turned.py at grey 200: ratio 1.5579). Read by the pin's top on the upper silhouette, columns 376 to 401: 157.75 px above the axis against the journal's 101.26 of radius
A little under the flange's radius: the pin stands 0.08 out of the extension.
The barrel extension's rear opening, its diameter at the rear face0.77 in ± 0.005 in 19.6 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec part
Model 0.77 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec part, from the site owner
Read by the rear face is the plane at 1.121 between radii .3850 and .4893
The inside of a mil-spec extension as the reference CAD set has it, for how the rear end looks (BCM: an M4 feed ramp extension, USGI; Primary Arms' photo _04 shows its lugs). Appearance only.
The rear opening's chamfer, its depth (at 45°, also how far it narrows the opening's radius)0.045 in ± 0.005 in 1.1 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec part
Model 0.045 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec part, from the site owner
Read by the cone at 45° from 1.076 to 1.121
The circle the extension's locking lugs leave between their tips0.572 in ± 0.003 in 14.5 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec part
Model 0.572 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec part, from the site owner
Read by eight cylinder faces of radius .2860, 0.922 to 1.022
The locking lugs' front faces, ahead of the extension's rear end0.214 in ± 0.005 in 5.4 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec part
Model 0.214 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec part, from the site owner
Read by the plane across the axis at 0.907 (radii .3010 to .4150): 1.121 less 0.907
The recess ahead of the lugs, which the bolt's lugs turn in: its diameter0.83 in ± 0.003 in 21.1 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec part
Model 0.83 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec part, from the site owner
Read by the cylinder of radius .4150, 0.5262 to 0.9070
The recess's front end, ahead of the extension's rear end0.595 in ± 0.005 in 15.1 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec part
Model 0.595 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a mil-spec part, from the site owner
Read by the cylinder of radius .4150 begins at 0.5262: 1.121 less 0.5262
The muzzle thread's major diameter (its crests)0.496 in ± 0.0033 in 12.6 mmConfirmedStandard: US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213
Standard “1/2-28 UNEF-2A MAJOR DIA .4989/.4924” used
US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213, from the site owner
The Army barrel's 1/2-28 thread, for the 1/2 X 28 the seller states: what the model's thread is drawn at. The photo's silhouette of the thread is 0.479 at the journal's scale, between its crests and its roots.
The muzzle thread's minor diameter (its roots)0.455 in ± 0.002 in 11.6 mmConfirmedStandard: US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213
Standard “MINOR DIA .4551 MAX” used
US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213, from the site owner
The muzzle thread's pitch0.036 in ± 0.00005 in 0.9 mmCorroboratedPublished: Primary Arms, Bravo Company Manufacturing Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Government - 16" (BCM-BRL-S-MID-16-STD), Specifications, a seller, read Oct 5, 2026
Standard “1/2-28 UNEF-2A”
US Army TDP drawing 8448549 (Barrel), sheet 1 of 2, rev J: Section M-M, the muzzle's thread; user-supplied scan, PDF page 213, from the site owner
Published “Thread Pattern 1/2 X 28” used
Primary Arms, Bravo Company Manufacturing Chrome Lined 5.56 AR-15 Barrel - Mid-Length - Government - 16" (BCM-BRL-S-MID-16-STD), Specifications, a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
The seller's statement for this barrel; the Army's drawing has the same thread on its own.
28 threads to the inch, by the seller's statement and the Army barrel's drawing: neither is a measurement of this barrel. The photo's own stripes are 9.204 px apart, which is 28 to the inch only at 257.7 px/in; the published length's scale is 276.8 there (see thread_length and the part's gaps).
The extension's rear face in the traced outline's own frame (from the silhouette's rear tip, at the journal's scale)0.112 in ± 0.006 in 2.8 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, 4848 x 3232
Photo 0.112 in ± 0.006 in used
Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, 4848 x 3232, harvested
Scale: scale from bcm-16-mid-barrel.flange_od = 1.185 in (y-extent 320 px → 270.2 px/in). Read by the min end's face: the silhouette's tip at 0.000 less its rim's arc, 0.111 in of sag at radius 0.503871 (the end is seen from 12.5° off square; arc fitted over 121 rows, rms 0.001) of the traced outline (tools/trace.py); the extension's rear face in the outline's own frame (from its rear tip, at the journal's scale)
Where the outline is cut: the silhouette's tip is the rear rim's near side, which stands behind the face by the rim's arc.
The muzzle's face in the traced outline's own frame (from the silhouette's rear tip, at the journal's scale)17.005 in ± 0.101 in 431.9 mmProvisionalPhoto: Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, 4848 x 3232
Photo 17.005 in ± 0.101 in used
Primary Arms' gallery, BCM-BRL-S-MID-16-STD_01: the barrel from the side on white, 4848 x 3232, harvested
Scale: scale from bcm-16-mid-barrel.flange_od = 1.185 in (y-extent 320 px → 270.2 px/in). Read by the max end's face: the silhouette's tip at 17.101 less its rim's arc, 0.097 in of sag at radius 0.238269 (the end is seen from 22.1° off square; arc fitted over 121 rows, rms 0.001) of the traced outline (tools/trace.py); the muzzle's face in the outline's own frame (from its rear tip, at the journal's scale)
Where the outline is cut: the silhouette's front tip is the muzzle rim's near side.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Barrel extension
- Uppers
- Aero Precision M4E1 Enhanced Upper Receiver Stripped, Aero Precision M4E1 Threaded upper receiver, BCM M4 Upper Receiver Assembly (w/ Laser T-Markings), Expo Arms 7075 Stripped AR-15 Upper Receiver, Geissele Automatics Super Duty Stripped Upper Receiver, Palmetto State Armory AR-15 Stripped Upper Receiver
Muzzle thread
- Muzzle devices
- Dead Air XRF Xeno Rimfire Muzzle Brake, HUXWRX Flash Hider-QD 556 1/2x28, Mil-spec A2 flash hider, 1/2-28 (drawing 9349051), Nordic Components 1/2-28 thread protector (ships on the 22RB), Otter Creek Labs Polonium, Otter Creek Labs Polonium K, Precision Armament M4-72 Severe-Duty® Compensator, SilencerCo Sparrow 22 (fit unchecked), SureFire ProComp 556 Muzzle Brake, SureFire SOCOM 3-Prong Flash Hider, SureFire SOCOM 4-Prong Flash Hider, SureFire WARCOMP Flash Hider, Taurus TX22 Thread Protector, VG6 Precision GAMMA 556
Gas block journal
- Gas blocks
- Aero Precision .750 low profile gas block, BCM Front Sight Base F - FSB (ID .750) - Milspec for Flat Top Uppers, BCM Low Profile Gas Block (steel with set screws) 750, SLR Rifleworks Sentry 7 Set Screw Adjustable Gas Block, Superlative Arms .750" Adjustable Gas Block, Bleed Off - Set Screw
Gas system length
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- BCM $279.00 Nov 21, 2026, in stock that day
- Primary Arms $279.00 Nov 21, 2026, out of stock that day