Gas block
Aero Precision .750 low profile gas block
Aero Precision's low-profile gas block for a .750 in journal: 4140 steel, nitride, held by two 10-32 set screws. The gas tube's roll pin isn't included.

- Weight
- 1.6 oz ± 0.05 oz Confirmedpublished: Aero Precision, .750 Low Profile Gas Block w/ Aero Logo - Nitride (APRH101205C), Specifications, the maker, read Oct 2, 2026
- Lowest price
- $40.00 at Aero Precision, read Nov 21, 2026
- Maker's number
- APRH101205C
- Colour
- Black nitride
- Drawn as
- modelled
- Maker's page
- aeroprecisionusa.com
In “Aero 5.56 carbine”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
The journal it is bored for0.75 in ± 0.001 in 19 mmConfirmedPublished: Aero Precision, .750 Low Profile Gas Block w/ Aero Logo - Nitride (APRH101205C), Features, the maker, read Oct 2, 2026
Published “Fits barrels with .750 Outer Diameter” used
Aero Precision, .750 Low Profile Gas Block w/ Aero Logo - Nitride (APRH101205C), Features, the maker, read Oct 2, 2026 the page, harvested Oct 2, 2026
Length along the barrel1.013 in ± 0.012 in 25.7 mmConflictPhoto: Aero's gallery: the block's right side, the front face at the right, 1000 x 631) and d829fa7f05e0 (its left side, the front face at the left, 1000 x 631
Photo 0.93 in ± 0.03 in
Aero's gallery: the block from the side, 1000 x 631, harvested
Scale: the side view's height, 543 px, as the end view's (the boss's top to the ring's bottom: 1.232 in by its bore). Read by the side view's width, 410 px
Photo 1.034 in ± 0.03 in
Aero's gallery: the block from the side, 1000 x 631, harvested
Scale: the side view's height, 545 px, as the end view's from the boss's top to the set-screw tab's bottom (0.795 + 0.572 = 1.367 in by its bore): 398.6 px/in. Read by the side view's width, 412 px
The side's bottom edge is the tab's, which runs the block's whole length (the oblique photo ffbee1a0d42b shows its flat bottom edge along the side to the front face): the 0.93 took the ring's bottom for it (2026-10-03).
Photo 1.013 in ± 0.012 in used
Aero's gallery: the block's right side, the front face at the right, 1000 x 631) and d829fa7f05e0 (its left side, the front face at the left, 1000 x 631, harvested
Scale: each side view's height on its level stretch (539.0 px, rows 47.0 to 586.0; 529.7 px, rows 50.9 to 580.5) as the end view's from the boss's top to the tab's flat, 1.355 in by its bore (rows 48.4 to 587.3 over a rim 298.2 px across): 397.8 and 390.9 px/in. Read by the two end faces in the boss's rows (rows 106 to 166, where the roll pin's hole is), each at the 50% level: columns 311.7 to 715.0 (403.3 px, 1.014 in) and 319.2 to 714.9 (395.7 px, 1.012 in)
The boss is the narrow part (0.33 in across, on the block's middle plane): its two faces are the block's own. In the ring's rows, 0.88 in across, the same two faces read 5 to 7 px further apart in each photo (409 and 408 px: 1.03 to 1.04 in), which is the ring's near and far edges seen a few degrees off square and from close by; the 1.034 above is that reading. A whole inch (what two sellers say of BCM's block) is just outside this ±.
Read where the block is narrowest across the rifle, in two photos that agree within 0.002 in; the 1.034 is the same two faces read across the ring, which a view a few degrees off square widens (2026-10-13). The 0.93 took the ring's bottom for the tab's.
photo and photo-tab differ by 0.104 in beyond what each states it is good to.
photo and photo-boss differ by 0.083 in beyond what each states it is good to.
Not published. Read off the side view against the end view's height (the block's top to its bottom, the same in both).
How high its top stands above the bore0.79 in ± 0.015 in 20.1 mmProvisionalPhoto: Aero's gallery: the block end-on, the tube's boss up, 1000 x 631
Photo 0.79 in ± 0.015 in used
Aero's gallery: the block end-on, the tube's boss up, 1000 x 631, harvested
Scale: its bore, 297 px across (x 360-658, y 213-509), as the .750 journal it is bored for (journal_id): 396 px/in, in the bore's near face. Read by the boss's top (row 48) to the bore's centre (row 361): 313 px
Not published. The top of the gas tube's boss.
Its gas port ahead of its rear face0.269 in ± 0.015 in 6.8 mmProvisionalWorked out: {aero-750-gas-block.length} - {aero-750-gas-block.pin_hole_from_front} - {aero-750-gas-block.pin_to_port}
Worked out 0.269 in ± 0.015 in used
{aero-750-gas-block.length} - {aero-750-gas-block.pin_hole_from_front} - {aero-750-gas-block.pin_to_port}
The pin's hole is 0.687 ahead of the rear face in both side views (the Army's sight: .688), read directly; the ± is that reading's and the drawing's.
Published “0.300 (the 0.075 port ahead of the 0.750 journal's rear end)”
AR-15_M4_Barrel_Dimensions.jpg in the user's TDP folder (Spec_Sheets): a third-party illustration of a 14.5 in mid-length barrel, no drawing number; its 0.620 tenon and 0.980 collar match the Army's 8448549, a page
The barrel's own figure, taken until 2026-10-13 as the block's with its rear face against the shoulder. It put the tube's pin hole 0.03 in behind the block's cross hole.
The block's own, by its pin hole in two photos: the tube's pin goes through the block's cross hole, and its gas hole is then here. The chart's figure is the barrel's, with the block hard against the shoulder.
Not published. Where the standard tube's gas hole lands when its pin is in the block's cross hole: the block's length less the pin's place behind the front face less the tube's pin-to-port. The Army's own sight has its port .270 from its rear face (8448566; the callout is in BCM's block's ledger, port_from_rear). The barrel's port is 0.300 ahead of its journal's shoulder (the chart below), so the block's rear face stands three hundredths ahead of the shoulder; the discovery report quotes Aero's support for the same ("Your gas block will sit approximately .025” off of the shoulder", data/proposals/discovery/aero-556-upper.yaml: a sentence read there and not on a harvested copy, so no reading here).
The set screws' flat below the bore axis0.568 in ± 0.008 in 14.4 mmProvisionalPhoto: Aero's gallery: the block end-on, the tube's boss up, 1000 x 631
Photo 0.568 in ± 0.008 in used
Aero's gallery: the block end-on, the tube's boss up, 1000 x 631, harvested
Scale: its bore's rim as a circle through 310 rays (the 50 degrees about the set screw's tip left out): centre row 361.3, 297.7 px across at the 165 level and 298.8 at 128 (rms 0.3 and 0.6 px), 298.2 taken as the .750 journal it is bored for (journal_id): 397.6 px/in. Read by the flat's edge at the 50% level, row 587.2 to 587.4 across its middle 0.15 in: 226.0 px below the bore's centre. The boss's top, row 48.4 on the axis, is 312.9 px above it: 0.787, which height_above_bore (0.79) has
Not published. The flat underside of the tab the set screws go up through. The traced outline (profiles.front) has it at 0.576: its frame is the bore as one circle through every ray, the set screw's tip in the bore's floor among them, which puts the centre 1.6 px high and the rim 1.6 px small.
The roll pin's cross hole behind the front (logo) face0.326 in ± 0.008 in 8.3 mmProvisionalPhoto: Aero's gallery: the block's right side, the front face at the right, 1000 x 631) and d829fa7f05e0 (its left side, 1000 x 631
Photo 0.326 in ± 0.008 in used
Aero's gallery: the block's right side, the front face at the right, 1000 x 631) and d829fa7f05e0 (its left side, 1000 x 631, harvested
Scale: each side view's height as the end view's, 1.355 in by its bore: 397.8 and 390.9 px/in (as length, photo-boss). Read by the hole's centre (a circle through its 50% edge on 72 rays: column 585.3 and column 446.7) to the front face's edge in the boss's rows (columns 715.0 and 319.2): 129.7 and 127.5 px, 0.326 in both; from the rear face 0.688 and 0.686
The logo is on the face nearer the pin's hole (the three-quarter view, ffbee1a0d42b), and the tube's pin is at the tube's front end: the logo face is the muzzle end, and the tube's hole enters from the other.
The roll pin's cross hole, diameter0.078 in ± 0.003 in 2 mmConfirmedWorked out: {bcm-750-gas-block.pin_hole_d}
Worked out 0.078 in ± 0.003 in used
{bcm-750-gas-block.pin_hole_d}, from the site owner
The Army's drawing 8448566 (Sight, Front), ".078 DIA +.003 THRU": the hole the gas tube's pin goes through. Its source is in BCM's block's ledger; this block takes the same tube and pin (Aero: "*Roll pin not included*").
Photo 0.079 in ± 0.004 in
Aero's gallery: the block's right side, 1000 x 631) and d829fa7f05e0 (its left side, 1000 x 631, harvested
Scale: each side view's height as the end view's, 1.355 in by its bore: 397.8 and 390.9 px/in. Read by a circle through the hole's 50% edge on 72 rays: 31.7 and 30.3 px across, 0.080 and 0.077 in
The pin it takes is the Army's; the hole in both photos is that size within a pixel.
The gas tube's pin hole to its gas hole0.418 in ± 0.002 in 10.6 mmConfirmedWorked out: {bcm-750-gas-block.pin_to_port}
Worked out 0.418 in ± 0.002 in used
{bcm-750-gas-block.pin_to_port}, from the site owner
The Army's drawing 8448567 (Gas Tube Assembly), ".418 ±.002": its source is in BCM's block's ledger. The same figure is std.ar15.gas_tube_hole_from_front (.605 REF) less the pin's .187 from the tube's front end.
The gas tube's hole, diameter0.18 in ± 0.001 in 4.6 mmConfirmedWorked out: {bcm-750-gas-block.tube_hole_d}
Worked out 0.1805 in ± 0.001 in used
{bcm-750-gas-block.tube_hole_d}, from the site owner
The Army's drawing 8448566 (Sight, Front), ".1805 DIA +.0010": its source is in BCM's block's ledger. The Army's sight, not this block.
Not published, and no view of the rear face is on file. The Army's sight's hole for the same .180 tube.
How far the gas tube's hole runs on ahead of the pin's hole0.217 in ± 0.015 in 5.5 mmConfirmedWorked out: {bcm-750-gas-block.tube_hole_past_pin}
Worked out 0.217 in ± 0.015 in used
{bcm-750-gas-block.tube_hole_past_pin}, from the site owner
The Army's drawing 8448566 (Sight, Front), ".905 ±.015 DEPTH; .688 ±.003": its source is in BCM's block's ledger. The Army's sight, not this block.
Not published. The logo face is closed (3f97b27af899, ffbee1a0d42b): the hole enters from the rear face and ends inside the boss. The Army's sight: the hole .905 deep, the pin .688 from the same face; this block's pin is 0.687 from its rear face, so its hole would end 0.904 in, 0.11 behind the logo.
The break along its edges0.012 in ± 0.006 in 0.3 mmProvisionalPhoto: Aero's gallery: the block's right side, 1000 x 631) and d829fa7f05e0 (its left side, 1000 x 631
Photo 0.012 in ± 0.006 in used
Aero's gallery: the block's right side, 1000 x 631) and d829fa7f05e0 (its left side, 1000 x 631, harvested
Scale: each side view's height as the end view's, 1.355 in by its bore: 397.8 and 390.9 px/in. Read by the boss's top edge where it meets each end face: 2.5 to 4 px low one column pair in from the rear face and 3 to 10 px low at the front face's, level by the third pair (5 px in)
Two to five pixels, and the front's reads the larger in both photos. One size is drawn on every edge.
Not published. The front face's rim shows it as a bright line in the three-quarter view (ffbee1a0d42b).
The set screw that shows, its middle behind the front (logo) face0.258 in ± 0.012 in 6.6 mmProvisionalPhoto: Aero's gallery: the block's right side, the front face at the right, 1000 x 631) and d829fa7f05e0 (its left side, 1000 x 631
Photo 0.258 in ± 0.012 in used
Aero's gallery: the block's right side, the front face at the right, 1000 x 631) and d829fa7f05e0 (its left side, 1000 x 631, harvested
Scale: each side view's height as the end view's, 1.355 in by its bore: 397.8 and 390.9 px/in. Read by the columns over which the bottom edge is more than a pixel below the tab's flat: 582 to 642 in the first (0.679 to 0.830 from the rear face, column 311.7) and 390 to 450 in the second (0.181 to 0.335 from the front face, column 319.2): its middle 0.258 behind the front face in both
Aero: "Set Screws are Steel 10-32 x 3/16 Knurled Cup Point": two. One stands out of the tab's flat in both side views, 0.011 in proud (4.4 px) over 0.15 in; nothing else breaks the flat's edge, so the other is at the flat or under it and no view on file says where along the block it is. A screw's tip shows inside the bore in the end view (3f97b27af899: 0.12 in wide on the bore's middle, 0.04 in in from the wall); which of the two it is isn't read. No view of the underside is on file.
A set screw's end face, as wide as it shows under the tab0.15 in ± 0.012 in 3.8 mmProvisionalPhoto: Aero's gallery: the block's right side, 1000 x 631) and d829fa7f05e0 (its left side, 1000 x 631
Photo 0.15 in ± 0.012 in used
Aero's gallery: the block's right side, 1000 x 631) and d829fa7f05e0 (its left side, 1000 x 631, harvested
Scale: each side view's height as the end view's, 1.355 in by its bore: 397.8 and 390.9 px/in. Read by the columns over which the bottom edge is more than a pixel below the tab's flat, read every 4 px: 60 px in each, 0.151 and 0.153 in
Narrower than the thread (set_screw_d): the screw's end is broken, and it is the end that stands out of the tab.
A set screw, its diameter0.185 in ± 0.015 in 4.7 mmProvisionalWorked out: {superlative-750-gas-block.set_screw_d}
Worked out 0.185 in ± 0.015 in used
{superlative-750-gas-block.set_screw_d}, harvested
A 10-32 set screw's end as photographed in the flat of Superlative Arms' block (its sellers: "10-32 x 3/16"): the reading and its photo are in that block's ledger. Another maker's screw of the thread Aero names.
Aero names the thread 10-32 and no view shows a screw's whole width in the tab (its end alone stands out of it: set_screw_end_d). Read on a photo of the same thread's screw, not taken from a thread table.
A set screw, length0.188 in ± 0.0005 in 4.8 mmConfirmedPublished: Aero Precision, .750 Low Profile Gas Block w/ Aero Logo - Nitride (APRH101205C), Features, the maker, read Oct 2, 2026
Published “Set Screws are Steel 10-32 x 3/16 Knurled Cup Point” used
Aero Precision, .750 Low Profile Gas Block w/ Aero Logo - Nitride (APRH101205C), Features, the maker, read Oct 2, 2026 the page, harvested Oct 2, 2026
From the journal's surface down, a 3/16 screw ends 0.005 in inside the tab's flat (0.568 less the journal's .375 is 0.193 of thread): at the flat, as on a barrel. In Aero's photos, off a barrel, the one that shows is backed out 0.011 in proud.
A set screw's hex socket, across flats0.094 in ± 0.0005 in 2.4 mmConfirmedPublished: Aero Precision support, Torque Specifications, as quoted in data/proposals/discovery/aero-556-upper.yaml and the part's seed (read 2026-10-02 from the Wayback Machine's copy of 2025-08-13), the maker, read Oct 2, 2026
Published “Gas Block set screws: 40 in lbs. (3/32 Allen Key) (thread locker will void warranty)” used
Aero Precision support, Torque Specifications, as quoted in data/proposals/discovery/aero-556-upper.yaml and the part's seed (read 2026-10-02 from the Wayback Machine's copy of 2025-08-13), the maker, read Oct 2, 2026 the page, harvested Oct 2, 2026
No view on file shows a socket. Aero's support names the key; the sentence is in the part's seed as the discovery report read it (a Wayback copy of 2025-08-13), not on the part's own page and not read again on a harvested copy.
Outside diameter of its ring about the barrel0.884 in ± 0.01 in 22.5 mmProvisionalPhoto: Aero's gallery: the block end-on, the tube's boss up, 1000 x 631
Photo 0.884 in ± 0.01 in used
Aero's gallery: the block end-on, the tube's boss up, 1000 x 631, harvested
Scale: its bore, 297 px across (x 360-658, y 213-509), as the .750 journal it is bored for (journal_id): 396 px/in, in the bore's near face. Read by the ring's width, 350 px (x 335-685)
Width of the gas tube's boss on top0.33 in ± 0.02 in 8.4 mmProvisionalPhoto: Aero's gallery: the block end-on, the tube's boss up, 1000 x 631
Photo 0.33 in ± 0.02 in used
Aero's gallery: the block end-on, the tube's boss up, 1000 x 631, harvested
Scale: its bore, 297 px across (x 360-658, y 213-509), as the .750 journal it is bored for (journal_id): 396 px/in, in the bore's near face. Read by the boss's width below its rounded top, 126 to 132 px (rows 100 to 130)
The gas tube's hole, its axis above the bore (at the block)0.625 in ± 0.006 in 15.9 mmConfirmedWorked out: {std.ar15.gas_tube_above_bore} - {aero-mid-gas-tube.bend_offset}
Worked out 0.625 in ± 0.006 in used
{std.ar15.gas_tube_above_bore} - {aero-mid-gas-tube.bend_offset}, from the site owner
The receiver's tube hole (8448524 View F-F, .781) less the tube's bend (8448567, .156): the tube drops from the receiver to the block.
Photo 0.625 in ± 0.02 in
Aero's gallery: the block from the side, 1000 x 631, harvested
Scale: 398.6 px/in (as length). Read by the roll pin's hole (the pin crosses the tube's), 0.170 below the block's top (0.795 above the bore)
The drawings; Aero's photo agrees.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Gas block journal
- Barrels
- Aero Precision 16" 5.56 CMV barrel, mid-length, BCM Standard 11.5" Carbine Barrel, Stripped, BCM Standard 14.5" Mid Length Barrel, Stripped, BCM Standard 16" Mid Length Barrel, Stripped, Bear Creek Arsenal BC-15 5.56 NATO, 16" Parkerized M4 Barrel, 1:7 Twist, Mid-Length Gas System, Daniel Defense CHF Chrome Lined 5.56 AR-15 Barrel - Carbine - Government - 10.3", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 13.9", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 14.5", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 16", Rosco Manufacturing Bloodline 10.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 11.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 12.5" M4 5.56 NATO
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Aero Precision $40.00 Nov 21, 2026, stock not said