Gas block
Superlative Arms .750" Adjustable Gas Block, Bleed Off - Set Screw
Superlative Arms' adjustable "bleed off" gas block for a .750 in journal, held by two 10-32 set screws: 416 stainless, sold with a black Melonite (QPQ) finish (SABO-DI-750SM, the number here), in matte stainless or with a tan DLC coat. Its adjustment screw is on the front face and lets the gas it doesn't use out of a port beside it, forward; a detent outside the block holds the setting (30 locked positions). The gas tube's roll pin and a 3/32 hex key are in the box; the gas tube isn't.

- Weight
- 1.68 oz ± 0.005 oz Conflictpublished: Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), Features, a seller, read Oct 6, 2026Its sources span 0.77 oz to 1.8 oz.
- Lowest price
- $89.99 at Primary Arms, read Nov 21, 2026 (Melonite)
- Maker's number
- SABO-DI-750SM
- Colours
- Melonite, Stainless Steel, Matte, Tan DLC
- Drawn as
- modelled
- Maker's page
- righttobear.com
In “Aero 5.56 carbine”, a build on the start page, in place of its Aero Precision .750 low profile gas block.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Bore (the journal it fits: .750 or .625)0.75 in ± 0.0005 in 19 mmCorroboratedPublished: Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), gallery image 13471: the maker's dimensioned drawing, titled '.750" ADJUSTABLE GAS BLOCK, SOLID' with the Superlative Arms logo (a copy on file), a seller, read Oct 6, 2026
Published “⌀0.750” used
Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), gallery image 13471: the maker's dimensioned drawing, titled '.750" ADJUSTABLE GAS BLOCK, SOLID' with the Superlative Arms logo (a copy on file), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The bore's circle, called out across its diameter.
Published “Barrel Diameter: 0.750"”
Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), Features, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Gas Seat Diameter .750”
Primary Arms, Superlative Arms AR-15 Adjustable Gas Block - Melonite - Set Screw - .750" (SABO-DI-750SM), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The maker's drawing; two sellers' tables say the same.
Primary Arms: "Built for a .750\" gas block journal"; Wing Tactical: "compatible with any AR-15 and AR-10 barrel that has a .625\" or .750\" diameter at the gas port area" (its page is both sizes). The .625 blocks and the clamp-on (SABO-DI-750CM) are other products.
Length along the barrel1 in ± 0.005 in 25.4 mmCorroboratedPublished: Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), Features, a seller, read Oct 6, 2026
Published “Length: 1.00"” used
Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), Features, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Length: 1.00"”
Blackstone Shooting Sports, Superlative Arms SABO-DI-750SM, Receiver, Solid Adjustable Gas Block, Black Melonite (850011846063), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Length : 1"”
Wing Tactical, Superlative Arms Adjustable Gas Block (one page for the .625 and .750, set screw and clamp-on), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Photo 1.011 in ± 0.012 in
Primary Arms' photo of SABO-DI-750SM: its right side straight on, the logo and 'Pat. # US 9,273,916 B1 / Lot # 121416', the adjuster at the right, 2200 x 1466, harvested
Scale: its height, 916.2 px (the boss's top, row 261.7, to the foot's flat, row 1177.9) as height (1.383): 662.5 px/in; the body's length then reads 1.005 to 1.016 in against the sellers' 1.00. Read by the body's rear edge to its front edge, each at the half level: 672.8 px on the foot's rows (1.016 in) and 666.1 px on the boss's rows (1.005); the ± covers the two, the edges' near rims and the scale
Photo 1.009 in ± 0.012 in
Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467, harvested
Scale: its height, 1009.0 px (the boss's top, row 254.7, to the foot's flat, row 1263.7) as height (1.383): 729.6 px/in; the body's length then reads 1.005 to 1.014 in against the sellers' 1.00. Read by the body's front edge to its rear edge: 739.8 px on the foot's rows (1.014 in) and 733.1 px on the boss's rows (1.005)
Two sellers' lists state it to the hundredth; both side photos, at the height's scale, read within 1.5% of it.
The body's, face to face: the adjuster and the detent's tab stand ahead of the front face (adjuster_reach, tab_thickness).
Height, the boss's top to the foot's flat1.383 in ± 0.0005 in 35.1 mmCorroboratedPublished: Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), gallery image 13471: the maker's dimensioned drawing, titled '.750" ADJUSTABLE GAS BLOCK, SOLID' with the Superlative Arms logo (a copy on file), a seller, read Oct 6, 2026
Published “1.383” used
Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), gallery image 13471: the maker's dimensioned drawing, titled '.750" ADJUSTABLE GAS BLOCK, SOLID' with the Superlative Arms logo (a copy on file), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Overall, between the extension lines at the boss's top and the foot's flat.
Published “1.383”
Dirty Bird Industries, Superlative Arms .750 Adjustable Gas Block - Solid - Melonited - SABO-DI-750SM, gallery image _3: the same drawing in another rendering, titled '0.750 ADJUSTABLE BLOCK, SOLID' (a copy on file; AR15Discounts shows it too, 7daffd4a9f94), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Height : Set Screw Model (.625"): 1.259" Clamp-On Model (.625"): 1.303" Set Screw Model (.750"): 1.383" Clamp-On Model (.750"): 1.426"”
Wing Tactical, Superlative Arms Adjustable Gas Block (one page for the .625 and .750, set screw and clamp-on), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Low profile: 1.383" height fits under most handguards”
Primary Arms, Superlative Arms AR-15 Adjustable Gas Block - Melonite - Set Screw - .750" (SABO-DI-750SM), Features, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The maker's own drawing as Right To Bear shows it; Dirty Bird's rendering of it has the same figure.
Primary Arms: "Low profile: 1.383\" height fits under most handguards". The drawing's own two halves add to it (0.813 + 0.570).
Width across the ring about the barrel0.93 in ± 0.0005 in 23.6 mmCorroboratedPublished: Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), gallery image 13471: the maker's dimensioned drawing, titled '.750" ADJUSTABLE GAS BLOCK, SOLID' with the Superlative Arms logo (a copy on file), a seller, read Oct 6, 2026
Published “0.930” used
Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), gallery image 13471: the maker's dimensioned drawing, titled '.750" ADJUSTABLE GAS BLOCK, SOLID' with the Superlative Arms logo (a copy on file), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Overall, between extension lines at the ring's two sides, at the bore's height.
Published “0.930”
Dirty Bird Industries, Superlative Arms .750 Adjustable Gas Block - Solid - Melonited - SABO-DI-750SM, gallery image _3: the same drawing in another rendering, titled '0.750 ADJUSTABLE BLOCK, SOLID' (a copy on file; AR15Discounts shows it too, 7daffd4a9f94), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “Width : 0.625" Gas Block: 0.78" 0.750"Gas Block: 0.93"”
Wing Tactical, Superlative Arms Adjustable Gas Block (one page for the .625 and .750, set screw and clamp-on), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Photo 0.9325 in ± 0.006 in
Primary Arms' photo of SABO-DI-750SM: its rear face straight on, the gas tube's hole in the boss, 2200 x 1467, harvested
Scale: its height, 831.0 px (the boss's top to the foot's flat) as height (1.383): 600.9 px/in. Read by the ring's two edges on the row 0.570 in above the flat (columns 828.1 and 1388.4, each at the half level): 560.3 px
Photo 0.934 in ± 0.006 in
Primary Arms' photo of SABO-DI-750SM: its front face straight on, 2200 x 1466, harvested
Scale: its height, 764.8 px (the boss's top, row 389.3, to the foot's flat, row 1154.1) as height (1.383): 553.0 px/in. Read by the ring's two edges on the row 0.570 in above the flat (columns 819.2 and 1335.8): 516.6 px
The maker's own drawing as Right To Bear shows it; Dirty Bird's rendering of it has the same figure.
The drawing's extension lines stand 133.5 px either side of the centre line: the ring is 0.465 in to each side. The detent's tab reaches further on the left (tab_corner_z).
Top above the bore axis0.813 in ± 0.0005 in 20.7 mmCorroboratedPublished: Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), gallery image 13471: the maker's dimensioned drawing, titled '.750" ADJUSTABLE GAS BLOCK, SOLID' with the Superlative Arms logo (a copy on file), a seller, read Oct 6, 2026
Published “0.813” used
Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), gallery image 13471: the maker's dimensioned drawing, titled '.750" ADJUSTABLE GAS BLOCK, SOLID' with the Superlative Arms logo (a copy on file), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
From the bore's horizontal centre line to the boss's top.
Published “0.813”
Dirty Bird Industries, Superlative Arms .750 Adjustable Gas Block - Solid - Melonited - SABO-DI-750SM, gallery image _3: the same drawing in another rendering, titled '0.750 ADJUSTABLE BLOCK, SOLID' (a copy on file; AR15Discounts shows it too, 7daffd4a9f94), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The maker's own drawing as Right To Bear shows it; Dirty Bird's rendering of it has the same figure.
The top of the gas tube's boss. Whether a handguard clears it is its inside against this and the tab's corner (tab_corner_z, tab_corner_y: 0.531 in from the bore's axis).
The foot's flat below the bore axis0.57 in ± 0.0005 in 14.5 mmCorroboratedPublished: Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), gallery image 13471: the maker's dimensioned drawing, titled '.750" ADJUSTABLE GAS BLOCK, SOLID' with the Superlative Arms logo (a copy on file), a seller, read Oct 6, 2026
Published “0.570” used
Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), gallery image 13471: the maker's dimensioned drawing, titled '.750" ADJUSTABLE GAS BLOCK, SOLID' with the Superlative Arms logo (a copy on file), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
From the bore's horizontal centre line to the foot's flat, where the two set screws are.
Published “0.570”
Dirty Bird Industries, Superlative Arms .750 Adjustable Gas Block - Solid - Melonited - SABO-DI-750SM, gallery image _3: the same drawing in another rendering, titled '0.750 ADJUSTABLE BLOCK, SOLID' (a copy on file; AR15Discounts shows it too, 7daffd4a9f94), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The maker's own drawing as Right To Bear shows it; Dirty Bird's rendering of it has the same figure.
Width of the foot's flat0.383 in ± 0.0005 in 9.7 mmCorroboratedPublished: Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), gallery image 13471: the maker's dimensioned drawing, titled '.750" ADJUSTABLE GAS BLOCK, SOLID' with the Superlative Arms logo (a copy on file), a seller, read Oct 6, 2026
Published “0.383” used
Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), gallery image 13471: the maker's dimensioned drawing, titled '.750" ADJUSTABLE GAS BLOCK, SOLID' with the Superlative Arms logo (a copy on file), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Between extension lines at the flat's two ends, 54.5 and 55.5 px either side of the centre line.
Published “0.383”
Dirty Bird Industries, Superlative Arms .750 Adjustable Gas Block - Solid - Melonited - SABO-DI-750SM, gallery image _3: the same drawing in another rendering, titled '0.750 ADJUSTABLE BLOCK, SOLID' (a copy on file; AR15Discounts shows it too, 7daffd4a9f94), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The maker's own drawing as Right To Bear shows it; Dirty Bird's rendering of it has the same figure.
Width of the gas tube's boss on top0.351 in ± 0.0005 in 8.9 mmCorroboratedPublished: Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), gallery image 13471: the maker's dimensioned drawing, titled '.750" ADJUSTABLE GAS BLOCK, SOLID' with the Superlative Arms logo (a copy on file), a seller, read Oct 6, 2026
Published “0.351” used
Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), gallery image 13471: the maker's dimensioned drawing, titled '.750" ADJUSTABLE GAS BLOCK, SOLID' with the Superlative Arms logo (a copy on file), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Between extension lines at the boss's two sides, 50.5 px either side of the centre line.
Published “0.351”
Dirty Bird Industries, Superlative Arms .750 Adjustable Gas Block - Solid - Melonited - SABO-DI-750SM, gallery image _3: the same drawing in another rendering, titled '0.750 ADJUSTABLE BLOCK, SOLID' (a copy on file; AR15Discounts shows it too, 7daffd4a9f94), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The maker's own drawing as Right To Bear shows it; Dirty Bird's rendering of it has the same figure.
The boss's top is a half round of this width: the drawing's broken line across it, 0.640 in above the bore, is where the round meets the sides (0.813 less half of 0.351 is 0.6375).
The detent tab's outer corner, left of the bore's vertical centre line0.381 in ± 0.0005 in 9.7 mmCorroboratedPublished: Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), gallery image 13471: the maker's dimensioned drawing, titled '.750" ADJUSTABLE GAS BLOCK, SOLID' with the Superlative Arms logo (a copy on file), a seller, read Oct 6, 2026
Published “0.381” used
Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), gallery image 13471: the maker's dimensioned drawing, titled '.750" ADJUSTABLE GAS BLOCK, SOLID' with the Superlative Arms logo (a copy on file), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
From the vertical centre line to an extension line through the cross at the tab's corner (column 484, 110.5 px from the centre line).
Published “0.381”
Dirty Bird Industries, Superlative Arms .750 Adjustable Gas Block - Solid - Melonited - SABO-DI-750SM, gallery image _3: the same drawing in another rendering, titled '0.750 ADJUSTABLE BLOCK, SOLID' (a copy on file; AR15Discounts shows it too, 7daffd4a9f94), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The maker's own drawing as Right To Bear shows it; Dirty Bird's rendering of it has the same figure.
With tab_corner_y it places the one point of the block that stands outside the ring: the upper outer corner of the detent's tab, marked with a cross in the drawing, 0.531 in from the bore's axis (the ring is 0.465). The small circle beside it, the detent's screw, is 0.03 in inside it (detent_screw_z).
The detent tab's outer corner above the bore axis0.37 in ± 0.0005 in 9.4 mmCorroboratedPublished: Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), gallery image 13471: the maker's dimensioned drawing, titled '.750" ADJUSTABLE GAS BLOCK, SOLID' with the Superlative Arms logo (a copy on file), a seller, read Oct 6, 2026
Published “0.370” used
Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), gallery image 13471: the maker's dimensioned drawing, titled '.750" ADJUSTABLE GAS BLOCK, SOLID' with the Superlative Arms logo (a copy on file), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
From the bore's horizontal centre line up to an extension line through the same cross (row 269, 106 px above the centre line).
Published “0.370”
Dirty Bird Industries, Superlative Arms .750 Adjustable Gas Block - Solid - Melonited - SABO-DI-750SM, gallery image _3: the same drawing in another rendering, titled '0.750 ADJUSTABLE BLOCK, SOLID' (a copy on file; AR15Discounts shows it too, 7daffd4a9f94), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
The maker's own drawing as Right To Bear shows it; Dirty Bird's rendering of it has the same figure.
The adjustment screw's axis above the bore axis0.484 in ± 0.004 in 12.3 mmProvisionalPhoto: Right To Bear's gallery image 13471: Superlative Arms' drawing '.750" ADJUSTABLE GAS BLOCK, SOLID', the block seen from its front, 750 x 750
Photo 0.484 in ± 0.004 in used
Right To Bear's gallery image 13471: Superlative Arms' drawing '.750" ADJUSTABLE GAS BLOCK, SOLID', the block seen from its front, 750 x 750, harvested
Scale: the drawing's own callouts, which keep one scale: 287.5 px/in (1.383 over 398 px, 0.930 over 267, 0.383 over 110, 0.351 over 101, 0.381 over 110.5, 0.370 over 106); its bore's circle is 0.749 in at that scale, centred at (373.7, 375.0) on the two centre lines. Read by circles fitted to the strokes of the double circle on the centre line above the bore (the centre line's own pixels left out): the outer, 185 points, centre (374.1, 236.2), radius 23.5 px; the inner, 164 points, centre (373.6, 235.7), radius 21.2 px; 139.0 px above the bore's centre
Not called out. The screw is on the bore's vertical centre line (its circles' centres are 0.001 to 0.002 in off it). Both side photos have what stands ahead of the front face at its full reach from 0.42 to 0.56 in above the bore: a middle of 0.49.
The adjustment screw's end face inside its edge break, diameter0.147 in ± 0.005 in 3.7 mmProvisionalPhoto: Right To Bear's gallery image 13471: Superlative Arms' drawing '.750" ADJUSTABLE GAS BLOCK, SOLID', the block seen from its front, 750 x 750
Photo 0.147 in ± 0.005 in used
Right To Bear's gallery image 13471: Superlative Arms' drawing '.750" ADJUSTABLE GAS BLOCK, SOLID', the block seen from its front, 750 x 750, harvested
Scale: the drawing's own callouts, which keep one scale: 287.5 px/in (1.383 over 398 px, 0.930 over 267, 0.383 over 110, 0.351 over 101, 0.381 over 110.5, 0.370 over 106); its bore's circle is 0.749 in at that scale, centred at (373.7, 375.0) on the two centre lines. Read by the inner circle of the double circle on the centre line: radius 21.15 px (rms 0.6 px), at its stroke's middle
The inner of the drawing's two circles. The screw's head as it stands out of the front face in the two side photos is 0.154 in across (adjuster_head_d): between the drawing's two circles, so the inner one is taken to be the edge of the break round its end face and the outer one the room it turns in.
The room the adjustment screw turns in, diameter0.164 in ± 0.005 in 4.2 mmProvisionalPhoto: Right To Bear's gallery image 13471: Superlative Arms' drawing '.750" ADJUSTABLE GAS BLOCK, SOLID', the block seen from its front, 750 x 750
Photo 0.164 in ± 0.005 in used
Right To Bear's gallery image 13471: Superlative Arms' drawing '.750" ADJUSTABLE GAS BLOCK, SOLID', the block seen from its front, 750 x 750, harvested
Scale: the drawing's own callouts, which keep one scale: 287.5 px/in (1.383 over 398 px, 0.930 over 267, 0.383 over 110, 0.351 over 101, 0.381 over 110.5, 0.370 over 106); its bore's circle is 0.749 in at that scale, centred at (373.7, 375.0) on the two centre lines. Read by the outer circle of the double circle on the centre line: radius 23.52 px (rms 0.85 px), at its stroke's middle
The outer of the drawing's two circles, taken to be the hole round the screw (the tab is cut to it): nothing says which circle is which.
The adjustment screw's head, diameter0.154 in ± 0.006 in 3.9 mmCorroboratedPhoto: Primary Arms' photo of SABO-DI-750SM: its right side straight on, the logo and 'Pat. # US 9,273,916 B1 / Lot # 121416', the adjuster at the right, 2200 x 1466
Photo 0.154 in ± 0.006 in used
Primary Arms' photo of SABO-DI-750SM: its right side straight on, the logo and 'Pat. # US 9,273,916 B1 / Lot # 121416', the adjuster at the right, 2200 x 1466, harvested
Scale: its height, 916.2 px (the boss's top, row 261.7, to the foot's flat, row 1177.9) as height (1.383): 662.5 px/in; the body's length then reads 1.005 to 1.016 in against the sellers' 1.00. Read by the rows on which the silhouette stands its full 0.217 in ahead of the front face: 426 to 528, 102 px
Photo 0.158 in ± 0.006 in
Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467, harvested
Scale: its height, 1009.0 px (the boss's top, row 254.7, to the foot's flat, row 1263.7) as height (1.383): 729.6 px/in; the body's length then reads 1.005 to 1.014 in against the sellers' 1.00. Read by the rows on which the silhouette stands its full reach ahead of the front face: 433 to 548, 115 px
The two sides agree within their ±; the right one's is taken.
The screw is in the block's middle plane, where the two side photos' scale is set.
The adjustment screw's neck between the front face and its head, diameter0.139 in ± 0.008 in 3.5 mmProvisionalPhoto: Primary Arms' photo of SABO-DI-750SM: its right side straight on, the logo and 'Pat. # US 9,273,916 B1 / Lot # 121416', the adjuster at the right, 2200 x 1466
Photo 0.139 in ± 0.008 in used
Primary Arms' photo of SABO-DI-750SM: its right side straight on, the logo and 'Pat. # US 9,273,916 B1 / Lot # 121416', the adjuster at the right, 2200 x 1466, harvested
Scale: its height, 916.2 px (the boss's top, row 261.7, to the foot's flat, row 1177.9) as height (1.383): 662.5 px/in; the body's length then reads 1.005 to 1.016 in against the sellers' 1.00. Read by the neck's upper edge stands 5 px (0.0075 in) under the head's (5.5 px in the left photo); taken the same underneath, where the tab hides it: the head's 0.154 less twice that
Between the face and the head the screw is a little smaller, with a shadow at the step: where the detent bears (Wing Tactical: "there are 4 clicks/revolution": four flats, which aren't read).
The adjustment screw's neck, from the front face to its head0.074 in ± 0.008 in 1.9 mmCorroboratedPhoto: Primary Arms' photo of SABO-DI-750SM: its right side straight on, the logo and 'Pat. # US 9,273,916 B1 / Lot # 121416', the adjuster at the right, 2200 x 1466
Photo 0.074 in ± 0.008 in used
Primary Arms' photo of SABO-DI-750SM: its right side straight on, the logo and 'Pat. # US 9,273,916 B1 / Lot # 121416', the adjuster at the right, 2200 x 1466, harvested
Scale: its height, 916.2 px (the boss's top, row 261.7, to the foot's flat, row 1177.9) as height (1.383): 662.5 px/in; the body's length then reads 1.005 to 1.016 in against the sellers' 1.00. Read by the step at the head's rear (column 1490) ahead of the front face's edge (column 1441.2): 48.8 px
Photo 0.081 in ± 0.008 in
Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467, harvested
Scale: its height, 1009.0 px (the boss's top, row 254.7, to the foot's flat, row 1263.7) as height (1.383): 729.6 px/in; the body's length then reads 1.005 to 1.014 in against the sellers' 1.00. Read by the step at the head's rear (column 700) ahead of the front face's edge (column 759): 59 px
The two sides agree within their ±; the right one's is taken (as closed, the way it is shipped).
The adjustment screw's end ahead of the front face0.217 in ± 0.008 in 5.5 mmCorroboratedPhoto: Primary Arms' photo of SABO-DI-750SM: its right side straight on, the logo and 'Pat. # US 9,273,916 B1 / Lot # 121416', the adjuster at the right, 2200 x 1466
Photo 0.217 in ± 0.008 in used
Primary Arms' photo of SABO-DI-750SM: its right side straight on, the logo and 'Pat. # US 9,273,916 B1 / Lot # 121416', the adjuster at the right, 2200 x 1466, harvested
Scale: its height, 916.2 px (the boss's top, row 261.7, to the foot's flat, row 1177.9) as height (1.383): 662.5 px/in; the body's length then reads 1.005 to 1.016 in against the sellers' 1.00. Read by the silhouette's furthest column ahead of the front face's edge (column 1441.2 on the foot's rows) on the rows 0.44 to 0.54 in above the bore: 143.8 px
Photo 0.216 in ± 0.008 in
Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467, harvested
Scale: its height, 1009.0 px (the boss's top, row 254.7, to the foot's flat, row 1263.7) as height (1.383): 729.6 px/in; the body's length then reads 1.005 to 1.014 in against the sellers' 1.00. Read by the silhouette's furthest column ahead of the front face's edge (column 756.0) on the rows 0.44 to 0.54 in above the bore: 157.6 px
The two sides read the same within a thousandth.
As photographed (Wing Tactical: it "comes to you with the adjustment screw in the closed position"); the screw backs out as it is opened, 18 clicks to full pressure and 30 more ("there are 4 clicks/revolution"): how far that is isn't published.
The bleed-off port, right of the bore's vertical centre line0.119 in ± 0.004 in 3 mmProvisionalPhoto: Right To Bear's gallery image 13471: Superlative Arms' drawing '.750" ADJUSTABLE GAS BLOCK, SOLID', the block seen from its front, 750 x 750
Photo 0.119 in ± 0.004 in used
Right To Bear's gallery image 13471: Superlative Arms' drawing '.750" ADJUSTABLE GAS BLOCK, SOLID', the block seen from its front, 750 x 750, harvested
Scale: the drawing's own callouts, which keep one scale: 287.5 px/in (1.383 over 398 px, 0.930 over 267, 0.383 over 110, 0.351 over 101, 0.381 over 110.5, 0.370 over 106); its bore's circle is 0.749 in at that scale, centred at (373.7, 375.0) on the two centre lines. Read by a circle fitted to the stroke of the plain circle left of the adjuster's (its part clear of the adjuster's circle, 212 points): centre (339.3, 241.7), radius 16.7 px; 34.4 px from the bore's centre line
The plain circle beside the adjuster in the drawing, on the side away from the tab: the part's right, since the drawing is seen from the front (the adjuster, the port and the tab are on the front face: Right To Bear, "Bleed Off Port: (Patent Pending) Front Of Block"). Primary Arms' front photo has a dark hole there.
The bleed-off port above the bore axis0.463 in ± 0.004 in 11.8 mmProvisionalPhoto: Right To Bear's gallery image 13471: Superlative Arms' drawing '.750" ADJUSTABLE GAS BLOCK, SOLID', the block seen from its front, 750 x 750
Photo 0.463 in ± 0.004 in used
Right To Bear's gallery image 13471: Superlative Arms' drawing '.750" ADJUSTABLE GAS BLOCK, SOLID', the block seen from its front, 750 x 750, harvested
Scale: the drawing's own callouts, which keep one scale: 287.5 px/in (1.383 over 398 px, 0.930 over 267, 0.383 over 110, 0.351 over 101, 0.381 over 110.5, 0.370 over 106); its bore's circle is 0.749 in at that scale, centred at (373.7, 375.0) on the two centre lines. Read by the same circle: its centre 133.3 px above the bore's
The bleed-off port, diameter0.116 in ± 0.005 in 2.9 mmProvisionalPhoto: Right To Bear's gallery image 13471: Superlative Arms' drawing '.750" ADJUSTABLE GAS BLOCK, SOLID', the block seen from its front, 750 x 750
Photo 0.116 in ± 0.005 in used
Right To Bear's gallery image 13471: Superlative Arms' drawing '.750" ADJUSTABLE GAS BLOCK, SOLID', the block seen from its front, 750 x 750, harvested
Scale: the drawing's own callouts, which keep one scale: 287.5 px/in (1.383 over 398 px, 0.930 over 267, 0.383 over 110, 0.351 over 101, 0.381 over 110.5, 0.370 over 106); its bore's circle is 0.749 in at that scale, centred at (373.7, 375.0) on the two centre lines. Read by the same circle: radius 16.67 px (rms 0.9 px), at its stroke's middle
The detent tab's upper edge above the bore axis0.485 in ± 0.004 in 12.3 mmCorroboratedPhoto: Right To Bear's gallery image 13471: Superlative Arms' drawing '.750" ADJUSTABLE GAS BLOCK, SOLID', the block seen from its front, 750 x 750
Photo 0.485 in ± 0.004 in used
Right To Bear's gallery image 13471: Superlative Arms' drawing '.750" ADJUSTABLE GAS BLOCK, SOLID', the block seen from its front, 750 x 750, harvested
Scale: the drawing's own callouts, which keep one scale: 287.5 px/in (1.383 over 398 px, 0.930 over 267, 0.383 over 110, 0.351 over 101, 0.381 over 110.5, 0.370 over 106); its bore's circle is 0.749 in at that scale, centred at (373.7, 375.0) on the two centre lines. Read by the level stroke from the adjuster's circle (column 398) to the outline (column 431): row 235.5, 139.5 px above the bore's centre
Photo 0.491 in ± 0.008 in
Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467, harvested
Scale: its height, 1009.0 px (the boss's top, row 254.7, to the foot's flat, row 1263.7) as height (1.383): 729.6 px/in; the body's length then reads 1.005 to 1.014 in against the sellers' 1.00. Read by the upper edge of the block that stands ahead of the front face under the adjuster (row 489.6 in the photo): 234.9 px below the boss's top
The drawing's line; the left side photo has the tab's upper edge there within its ±.
The level line from the adjuster's circle to the outline in the drawing: the tab's upper edge, at the adjuster's own height.
The gas tube's roll pin: its cross hole behind the front face0.311 in ± 0.008 in 7.9 mmCorroboratedPhoto: Primary Arms' photo of SABO-DI-750SM: its right side straight on, the logo and 'Pat. # US 9,273,916 B1 / Lot # 121416', the adjuster at the right, 2200 x 1466
Photo 0.311 in ± 0.008 in used
Primary Arms' photo of SABO-DI-750SM: its right side straight on, the logo and 'Pat. # US 9,273,916 B1 / Lot # 121416', the adjuster at the right, 2200 x 1466, harvested
Scale: its height, 916.2 px (the boss's top, row 261.7, to the foot's flat, row 1177.9) as height (1.383): 662.5 px/in; the body's length then reads 1.005 to 1.016 in against the sellers' 1.00. Read by the hole's rim picked on an 8x gridded crop (columns 1204.4 to 1258.1, rows 329.4 to 390: centre (1231.5, 359.4)) behind the front face's edge on the boss's rows (column 1437.2): 205.7 px
Photo 0.315 in ± 0.008 in
Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467, harvested
Scale: its height, 1009.0 px (the boss's top, row 254.7, to the foot's flat, row 1263.7) as height (1.383): 729.6 px/in; the body's length then reads 1.005 to 1.014 in against the sellers' 1.00. Read by the hole's rim picked on an 8x gridded crop (columns 965 to 1018.8, rows 330.6 to 390: centre (991.9, 360.3)) behind the front face's edge on the boss's rows (column 761.8): 230.1 px
The two sides agree within their ±; the right one's is taken.
Through the boss from side to side, seen in both side photos. With the sellers' length it is 0.687 in ahead of the rear face: the Army's front sight has it .688 from its rear face (drawing 8448566, by the BCM block's ledger).
The gas tube's roll pin: its cross hole, diameter0.078 in ± 0.003 in 2 mmConfirmedWorked out: {bcm-750-gas-block.pin_hole_d}
Worked out 0.078 in ± 0.003 in used
{bcm-750-gas-block.pin_hole_d}
The Army's hole for the gas tube's pin (drawing 8448566, as the BCM block's ledger cites it): the Army's sight, not this block.
Photo 0.081 in ± 0.008 in
Primary Arms' photo of SABO-DI-750SM: its right side straight on, the logo and 'Pat. # US 9,273,916 B1 / Lot # 121416', the adjuster at the right, 2200 x 1466, harvested
Scale: its height, 916.2 px (the boss's top, row 261.7, to the foot's flat, row 1177.9) as height (1.383): 662.5 px/in; the body's length then reads 1.005 to 1.016 in against the sellers' 1.00. Read by the hole's rim on the 8x crop: 53.7 px across, its edge break included
Photo 0.074 in ± 0.008 in
Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467, harvested
Scale: its height, 1009.0 px (the boss's top, row 254.7, to the foot's flat, row 1263.7) as height (1.383): 729.6 px/in; the body's length then reads 1.005 to 1.014 in against the sellers' 1.00. Read by the hole's rim on the 8x crop: 53.8 px across
The pin it takes is the standard one; the two photos read either side of it, within their ±.
The block takes the standard tube and its pin (the pin is in the box: Right To Bear, "1x Gas Tube Roll Pins"; "***Gas Tube NOT Included***").
The gas tube's pin hole to its gas hole0.418 in ± 0.002 in 10.6 mmConfirmedWorked out: {bcm-750-gas-block.pin_to_port}
Worked out 0.418 in ± 0.002 in used
{bcm-750-gas-block.pin_to_port}
The Army's gas tube (drawing 8448567, as the BCM block's ledger cites it): the tube this block takes.
Its gas port ahead of its rear face0.271 in ± 0.01 in 6.9 mmCorroboratedWorked out: {superlative-750-gas-block.length} - {superlative-750-gas-block.pin_hole_from_front} - {superlative-750-gas-block.pin_to_port}
Worked out 0.271 in ± 0.01 in used
{superlative-750-gas-block.length} - {superlative-750-gas-block.pin_hole_from_front} - {superlative-750-gas-block.pin_to_port}
Not published, and the port is inside. Where the standard tube's gas hole lands with its pin in the block's cross hole: the length less the pin's place behind the front face less the tube's pin-to-port. The Army's own sight has its port .270 from its rear face. The part's frame is here.
The gas tube's hole, its axis above the bore (at the block)0.685 in ± 0.008 in 17.4 mmProvisionalPhoto: Primary Arms' photo of SABO-DI-750SM: its rear face straight on, the gas tube's hole in the boss, 2200 x 1467
Photo 0.685 in ± 0.008 in used
Primary Arms' photo of SABO-DI-750SM: its rear face straight on, the gas tube's hole in the boss, 2200 x 1467, harvested
Scale: its height, 831.0 px (the boss's top, row 277.1, to the foot's flat, row 1108.0) as height (1.383): 600.9 px/in; its width then reads 0.9325 in (the drawing's 0.930) and the bore, seen through, 0.751 (.750): three published sizes within 0.3%. Read by a circle through the hole's edge on 60 rays from its middle, each at the half level between the hole (11 of 255) and the face (49): centre (1105.2, 353.7), radius 56.0 px (rms 1.2); 0.128 in below the boss's top, 411.8 px above the row 0.570 in over the flat; 0.005 in off the middle column
Not published. The hole stands high in its boss (0.035 in of wall above it, 0.08 beside it): 0.060 in above the Army's .625 for a front sight, which the BCM and Aero blocks are drawn at. No page says which gas tube it wants (Right To Bear: "***Gas Tube NOT Included***"); an aggregator's line about tube offsets was not taken.
The gas tube's hole, diameter0.18 in ± 0.001 in 4.6 mmConfirmedWorked out: {bcm-750-gas-block.tube_hole_d}
Worked out 0.1805 in ± 0.001 in used
{bcm-750-gas-block.tube_hole_d}
The Army's hole for the .180 tube (drawing 8448566, as the BCM block's ledger cites it): the Army's sight, not this block.
Photo 0.186 in ± 0.006 in
Primary Arms' photo of SABO-DI-750SM: its rear face straight on, the gas tube's hole in the boss, 2200 x 1467, harvested
Scale: its height, 831.0 px (the boss's top, row 277.1, to the foot's flat, row 1108.0) as height (1.383): 600.9 px/in; its width then reads 0.9325 in (the drawing's 0.930) and the bore, seen through, 0.751 (.750): three published sizes within 0.3%. Read by the same circle: 112.0 px across at the half level, its edge break included
It takes the standard tube; the rear photo's hole, with its edge break, is 0.006 in over.
How far the gas tube's hole runs on ahead of the pin's hole0.217 in ± 0.015 in 5.5 mmConfirmedWorked out: {bcm-750-gas-block.tube_hole_past_pin}
Worked out 0.217 in ± 0.015 in used
{bcm-750-gas-block.tube_hole_past_pin}
The Army's sight (drawing 8448566, as the BCM block's ledger cites it), not this block.
Not published and not seen: the hole enters the rear face and the boss's front is closed in every photo of it. The Army's sight's depth is taken.
The detent's pin, its axis left of the bore's vertical centre line0.342 in ± 0.004 in 8.7 mmProvisionalPhoto: Right To Bear's gallery image 13471: Superlative Arms' drawing '.750" ADJUSTABLE GAS BLOCK, SOLID', the block seen from its front, 750 x 750
Photo 0.342 in ± 0.004 in used
Right To Bear's gallery image 13471: Superlative Arms' drawing '.750" ADJUSTABLE GAS BLOCK, SOLID', the block seen from its front, 750 x 750, harvested
Scale: the drawing's own callouts, which keep one scale: 287.5 px/in (1.383 over 398 px, 0.930 over 267, 0.383 over 110, 0.351 over 101, 0.381 over 110.5, 0.370 over 106); its bore's circle is 0.749 in at that scale, centred at (373.7, 375.0) on the two centre lines. Read by a circle fitted to the stroke of the small circle on the tab's ear (108 points): centre (471.9, 281.8), radius 9.2 px; 98.2 px from the bore's centre line
The small circle on the tab's ear in the drawing: the front end of the pin that runs back through the tab and the pad and lies in a groove along the left side (the patent's pin 70). Primary Arms' front photo shows a small bright ring there. It is 0.471 in from the bore's axis: 0.006 outside the ring's surface, so behind the pad the pin lies half sunk in it.
The detent's pin, its axis above the bore axis0.324 in ± 0.004 in 8.2 mmConflictPhoto: Right To Bear's gallery image 13471: Superlative Arms' drawing '.750" ADJUSTABLE GAS BLOCK, SOLID', the block seen from its front, 750 x 750
Photo 0.324 in ± 0.004 in used
Right To Bear's gallery image 13471: Superlative Arms' drawing '.750" ADJUSTABLE GAS BLOCK, SOLID', the block seen from its front, 750 x 750, harvested
Scale: the drawing's own callouts, which keep one scale: 287.5 px/in (1.383 over 398 px, 0.930 over 267, 0.383 over 110, 0.351 over 101, 0.381 over 110.5, 0.370 over 106); its bore's circle is 0.749 in at that scale, centred at (373.7, 375.0) on the two centre lines. Read by the same circle: its centre 93.2 px above the bore's
Photo 0.259 in ± 0.02 in
Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467, harvested
Scale: its height, 1009.0 px (the boss's top, row 254.7, to the foot's flat, row 1263.7) as height (1.383): 729.6 px/in; the body's length then reads 1.005 to 1.014 in against the sellers' 1.00. Read by the rod's two edges where it lies in its groove behind the pad (rows 640 and 678.5): its middle 404.5 px below the boss's top. As read: the rod is on the side near the lens, 0.34 in out from the middle plane, and the photo is from above
The maker's drawing, square on. The side photo is from above and reads what is near the lens low: 0.065 in here, 0.34 in out from the middle plane.
drawing-circle and photo-left differ by 0.065 in beyond what each states it is good to.
Both side photos are taken from close by and from a little above: the pin's hole shows its far wall above its near rim, the tab reads 0.182 in thick where it is near the lens (the left photo) and 0.151 where it is far (the right), and what is on the near side reads low (the detent's pin 0.065 in under the drawing's circle for it). Lengths along the block at the middle plane are as read; heights of anything off that plane are not.
The detent's pin, diameter0.064 in ± 0.005 in 1.6 mmCorroboratedPhoto: Right To Bear's gallery image 13471: Superlative Arms' drawing '.750" ADJUSTABLE GAS BLOCK, SOLID', the block seen from its front, 750 x 750
Photo 0.064 in ± 0.005 in used
Right To Bear's gallery image 13471: Superlative Arms' drawing '.750" ADJUSTABLE GAS BLOCK, SOLID', the block seen from its front, 750 x 750, harvested
Scale: the drawing's own callouts, which keep one scale: 287.5 px/in (1.383 over 398 px, 0.930 over 267, 0.383 over 110, 0.351 over 101, 0.381 over 110.5, 0.370 over 106); its bore's circle is 0.749 in at that scale, centred at (373.7, 375.0) on the two centre lines. Read by the same circle: radius 9.24 px (rms 0.7 px), at its stroke's middle
Photo 0.053 in ± 0.008 in
Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467, harvested
Scale: its height, 1009.0 px (the boss's top, row 254.7, to the foot's flat, row 1263.7) as height (1.383): 729.6 px/in; the body's length then reads 1.005 to 1.014 in against the sellers' 1.00. Read by the rod's two edges in its groove (rows 640 and 678.5): 38.5 px, what of it stands out of the groove
Its end as the maker draws it; the side photo sees what stands out of its groove.
The detent's pin, its rear end behind the front face0.402 in ± 0.02 in 10.2 mmProvisionalPhoto: Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467
Photo 0.402 in ± 0.02 in used
Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467, harvested
Scale: its height, 1009.0 px (the boss's top, row 254.7, to the foot's flat, row 1263.7) as height (1.383): 729.6 px/in; the body's length then reads 1.005 to 1.014 in against the sellers' 1.00. Read by the rod's rounded rear end (column 1052.5) behind the front face's edge (column 759): 293.5 px; the ± covers the lens's nearness (what is near it reads some 5% long)
The detent tab, how far it stands ahead of the front face0.166 in ± 0.012 in 4.2 mmConflict2 readings
Photo 0.182 in ± 0.008 in
Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467, harvested
Scale: its height, 1009.0 px (the boss's top, row 254.7, to the foot's flat, row 1263.7) as height (1.383): 729.6 px/in; the body's length then reads 1.005 to 1.014 in against the sellers' 1.00. Read by the silhouette's furthest column ahead of the front face's edge on the rows of the tab's ear: 0.177 to 0.185 in (129 to 135 px); the ear is 0.36 in nearer the lens than the middle plane
Photo 0.151 in ± 0.008 in
Primary Arms' photo of SABO-DI-750SM: its right side straight on, the logo and 'Pat. # US 9,273,916 B1 / Lot # 121416', the adjuster at the right, 2200 x 1466, harvested
Scale: its height, 916.2 px (the boss's top, row 261.7, to the foot's flat, row 1177.9) as height (1.383): 662.5 px/in; the body's length then reads 1.005 to 1.016 in against the sellers' 1.00. Read by the silhouette's furthest column ahead of the front face's edge on the rows under the adjuster: 0.143 to 0.151 in (95 to 100 px); the tab is 0.36 in beyond the middle plane
Neither reading: the same block read 0.182 where it is 0.36 in nearer the lens than the middle plane and 0.151 where it is 0.36 in beyond it. Their ratio puts the lens 3.9 in from the middle plane, and each reading taken back to that plane is 0.165 (0.182 x 3.54 / 3.9, 0.151 x 4.26 / 3.9); the geometric mean of the two is 0.166.
photo-left and photo-right differ by 0.031 in beyond what each states it is good to.
The tab is a block on the front face, not a plate. Both side photos are taken from close by and from a little above: the pin's hole shows its far wall above its near rim, the tab reads 0.182 in thick where it is near the lens (the left photo) and 0.151 where it is far (the right), and what is on the near side reads low (the detent's pin 0.065 in under the drawing's circle for it). Lengths along the block at the middle plane are as read; heights of anything off that plane are not. The two readings are one block seen near and far: a lens some 4 in off makes them 0.167 and 0.164.
The raised pad on the left side behind the front face, its length0.218 in ± 0.015 in 5.5 mmProvisionalPhoto: Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467
Photo 0.218 in ± 0.015 in used
Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467, harvested
Scale: its height, 1009.0 px (the boss's top, row 254.7, to the foot's flat, row 1263.7) as height (1.383): 729.6 px/in; the body's length then reads 1.005 to 1.014 in against the sellers' 1.00. Read by the step's edge (column 918, lit along its length) behind the front face's edge (column 759): 159 px; the ± covers the lens's nearness (what is near it reads some 5% long)
A band of the left side stands proud from the front face back to a step: what makes the bulge beside the tab in the drawing's outline, and what the pin's hole is in. The model takes its section from the drawing.
The window across the tab's ear, diameter0.115 in ± 0.012 in 2.9 mmProvisionalPhoto: Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467
Photo 0.115 in ± 0.012 in used
Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467, harvested
Scale: its height, 1009.0 px (the boss's top, row 254.7, to the foot's flat, row 1263.7) as height (1.383): 729.6 px/in; the body's length then reads 1.005 to 1.014 in against the sellers' 1.00. Read by the window's width (columns 684 to 767.5: 83.5 px); its height reads the same (rows 617.5 to 702.5)
A hole across the tab's ear through which the pin shows, bright, in the left side photo and in Wing Tactical's stainless one (a80edfa7809c). Its height is the pin's.
The window across the tab's ear, its middle ahead of the front face0.045 in ± 0.01 in 1.1 mmProvisionalPhoto: Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467
Photo 0.045 in ± 0.01 in used
Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467, harvested
Scale: its height, 1009.0 px (the boss's top, row 254.7, to the foot's flat, row 1263.7) as height (1.383): 729.6 px/in; the body's length then reads 1.005 to 1.014 in against the sellers' 1.00. Read by the window's middle (column 725.8) ahead of the front face's edge (column 759): 33 px
The gas tube's roll pin: its cross hole above the bore axis0.685 in ± 0.008 in 17.4 mmProvisionalWorked out: {superlative-750-gas-block.tube_hole_above_bore}
Worked out 0.685 in ± 0.008 in used
{superlative-750-gas-block.tube_hole_above_bore}
The tube's own axis, by the rear photo.
Photo 0.666 in ± 0.02 in
Primary Arms' photo of SABO-DI-750SM: its right side straight on, the logo and 'Pat. # US 9,273,916 B1 / Lot # 121416', the adjuster at the right, 2200 x 1466, harvested
Scale: its height, 916.2 px (the boss's top, row 261.7, to the foot's flat, row 1177.9) as height (1.383): 662.5 px/in; the body's length then reads 1.005 to 1.016 in against the sellers' 1.00. Read by the hole's rim's centre (row 359.4) below the boss's top (row 261.7): 97.7 px, 0.1475 in below the 0.813 of the top. As read, from above
Photo 0.668 in ± 0.02 in
Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467, harvested
Scale: its height, 1009.0 px (the boss's top, row 254.7, to the foot's flat, row 1263.7) as height (1.383): 729.6 px/in; the body's length then reads 1.005 to 1.014 in against the sellers' 1.00. Read by the hole's rim's centre (row 360.3) below the boss's top (row 254.7): 105.6 px, 0.1447 in below the 0.813 of the top. As read, from above
The pin crosses the tube. Both side photos read 0.018 in lower, on a rim 0.18 in nearer the lens than the middle plane, in photos taken from above.
A pin through the tube crosses its axis: the hole is at the tube's height. Both side photos are taken from close by and from a little above: the pin's hole shows its far wall above its near rim, the tab reads 0.182 in thick where it is near the lens (the left photo) and 0.151 where it is far (the right), and what is on the near side reads low (the detent's pin 0.065 in under the drawing's circle for it). Lengths along the block at the middle plane are as read; heights of anything off that plane are not. The hole's near rim is 0.18 in out from the middle plane and reads 0.018 low.
The round pocket low on the left side: its middle behind the front face0.508 in ± 0.012 in 12.9 mmProvisionalPhoto: Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467
Photo 0.508 in ± 0.012 in used
Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467, harvested
Scale: its height, 1009.0 px (the boss's top, row 254.7, to the foot's flat, row 1263.7) as height (1.383): 729.6 px/in; the body's length then reads 1.005 to 1.014 in against the sellers' 1.00. Read by the pocket's two sides (columns 1074 and 1180) on a 5x gridded crop: its middle, column 1127, behind the front face's edge on the foot's rows (column 756.0): 371 px
A flat-floored round pocket in the left side's lower flank, at mid length, seen as a D with its flat down: its floor meets the flank's surface along that flat. What it is for isn't said anywhere; Primary Arms' right side photo shows none on the right.
The round pocket low on the left side: diameter0.145 in ± 0.012 in 3.7 mmProvisionalPhoto: Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467
Photo 0.145 in ± 0.012 in used
Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467, harvested
Scale: its height, 1009.0 px (the boss's top, row 254.7, to the foot's flat, row 1263.7) as height (1.383): 729.6 px/in; the body's length then reads 1.005 to 1.014 in against the sellers' 1.00. Read by the pocket's two sides (columns 1074 and 1180): 106 px; the ± covers the lens's nearness
The round pocket low on the left side: its top below the bore axis0.271 in ± 0.025 in 6.9 mmProvisionalPhoto: Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467
Photo 0.271 in ± 0.025 in used
Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467, harvested
Scale: its height, 1009.0 px (the boss's top, row 254.7, to the foot's flat, row 1263.7) as height (1.383): 729.6 px/in; the body's length then reads 1.005 to 1.014 in against the sellers' 1.00. Read by the top of its arc (row 1079): 824.3 px below the boss's top, 1.130 in, less the 0.813 of the top: 0.317 as read. The photo is from above and reads what is near the lens low, by 0.19 in for each inch out from the middle plane at the detent's pin (0.259 read where the drawing has 0.324, 0.34 in out) and by 0.10 at the roll pin's hole (0.668 where the tube's axis is 0.685, 0.18 in out): 0.14 is taken, and the ± covers the two: the arc's top is on the flank 0.33 in out, 0.046 in less
The round pocket low on the left side: its flat lower edge below the bore axis0.359 in ± 0.025 in 9.1 mmProvisionalPhoto: Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467
Photo 0.359 in ± 0.025 in used
Primary Arms' photo of SABO-DI-750SM: its left side straight on, the adjuster and the detent's tab at the left, 2200 x 1467, harvested
Scale: its height, 1009.0 px (the boss's top, row 254.7, to the foot's flat, row 1263.7) as height (1.383): 729.6 px/in; the body's length then reads 1.005 to 1.014 in against the sellers' 1.00. Read by its straight lower edge (row 1140): 885.3 px below the boss's top, 1.213 in, less the 0.813 of the top: 0.400 as read. The photo is from above and reads what is near the lens low, by 0.19 in for each inch out from the middle plane at the detent's pin (0.259 read where the drawing has 0.324, 0.34 in out) and by 0.10 at the roll pin's hole (0.668 where the tube's axis is 0.685, 0.18 in out): 0.14 is taken, and the ± covers the two: the edge is on the flank 0.29 in out, 0.041 in less
The rear set screw, ahead of the rear face0.26 in ± 0.03 in 6.6 mmProvisionalPhoto: Wing Tactical's gallery image 66646: a stainless set-screw block lying on its right side, its underside's flat toward the lens with both screws, 'Lot # 100417', 1280 x 1280; the page is for the .625 and the .750 and the picture doesn't say which it is
Photo 0.26 in ± 0.03 in used
Wing Tactical's gallery image 66646: a stainless set-screw block lying on its right side, its underside's flat toward the lens with both screws, 'Lot # 100417', 1280 x 1280; the page is for the .625 and the .750 and the picture doesn't say which it is, harvested
Scale: the flat's own length along its middle line, 1228.5 px (3x crop) between its rear and front edges, as length (1.00): the middle line through both screws meets each end edge at its middle (0.52 and 0.53 of the way across). Read by the rear screw's middle 312 px along the flat's middle line from the rear edge (0.254 of it); the front screw's socket is 4% larger in the picture than the rear's, and with the scale growing by that along the flat it is 0.26; the ± covers the picked corners and that
Two socket set screws in the foot's flat, in line along its middle (Right To Bear: "2x 10-32 x 3/16\" Socket Head Cap Screws"; Dirty Bird: "Two 10-32 x 3/16″ set screws"; Joe Bob's: "(2) 10-32 x 1/4\" Set Screws"). No view square to the underside is on file: read off an oblique one of a stainless block whose diameter the page doesn't say.
The front set screw, ahead of the rear face0.73 in ± 0.03 in 18.5 mmProvisionalPhoto: Wing Tactical's gallery image 66646: a stainless set-screw block lying on its right side, its underside's flat toward the lens with both screws, 'Lot # 100417', 1280 x 1280; the page is for the .625 and the .750 and the picture doesn't say which it is
Photo 0.73 in ± 0.03 in used
Wing Tactical's gallery image 66646: a stainless set-screw block lying on its right side, its underside's flat toward the lens with both screws, 'Lot # 100417', 1280 x 1280; the page is for the .625 and the .750 and the picture doesn't say which it is, harvested
Scale: the flat's own length along its middle line, 1228.5 px (3x crop) between its rear and front edges, as length (1.00): the middle line through both screws meets each end edge at its middle (0.52 and 0.53 of the way across). Read by the front screw's middle 890 px along the flat's middle line from the rear edge (0.724 of it); 0.73 with the picture's perspective taken out the same way
A set screw, diameter as it shows in the flat0.185 in ± 0.015 in 4.7 mmProvisionalPhoto: Wing Tactical's gallery image 66646: a stainless set-screw block lying on its right side, its underside's flat toward the lens with both screws, 'Lot # 100417', 1280 x 1280; the page is for the .625 and the .750 and the picture doesn't say which it is
Photo 0.185 in ± 0.015 in used
Wing Tactical's gallery image 66646: a stainless set-screw block lying on its right side, its underside's flat toward the lens with both screws, 'Lot # 100417', 1280 x 1280; the page is for the .625 and the .750 and the picture doesn't say which it is, harvested
Scale: the flat's width across the same picture, 480 px (3x crop) between its two long edges at the rear screw, as foot_width (0.383). Read by the rear screw's bright ring, 230 px across along the flat's width
The sellers call the thread 10-32; the figure here is the screw's bright end as photographed, against the flat it is in.
The hex key in the box, across flats0.094 in ± 0.0005 in 2.4 mmCorroboratedPublished: Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), Features, a seller, read Oct 6, 2026
Published “1x 3/32 X 6" L-Shaped Hex Keys” used
Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), Features, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “1x 3/32 x 6" L-shaped Hex key”
Wing Tactical, Superlative Arms Adjustable Gas Block (one page for the .625 and .750, set screw and clamp-on), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Two sellers list the same key.
Wing Tactical: "you will adjust the piston gas block utilizing the 3/32” Allen wrench provided": the adjuster's socket. The set screws' sockets are drawn at the same size (one key is in the box); no page says so.
A set screw, length0.188 in ± 0.0005 in 4.8 mmConflictPublished: Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), Features, a seller, read Oct 6, 2026
Published “2x 10-32 x 3/16" Socket Head Cap Screws” used
Right To Bear, Superlative Arms.750" Adjustable Gas Block, Bleed Off - Set Screw, Melonited (SABO-DI-750SM), Features, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “2x 10-32 x 3/16"socket head cap screws”
Wing Tactical, Superlative Arms Adjustable Gas Block (one page for the .625 and .750, set screw and clamp-on), Specifications, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “(2) 10-32 x 3/16" Set Screws”
Mounts Plus, Superlative Arms Adjustable Gas Block .750", Bleed Off Solid, a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Published “(2) 10-32 x 1/4" Set Screws”
Joe Bob Outfitters, Superlative Arms AR-15 / AR-10 .750" Adjustable Bleed Off Gas Block - Solid - Melonite (SUP-SABO-DI-750SM), a seller, read Oct 6, 2026 the page, harvested Oct 6, 2026
Three sellers say 3/16; Joe Bob's 1/4 would stand 0.055 in out of the flat with its tip on the barrel, which no photo of the underside shows.
right-to-bear and joe-bob differ by 0.063 in beyond what each states it is good to.
wing and joe-bob differ by 0.063 in beyond what each states it is good to.
mounts-plus and joe-bob differ by 0.063 in beyond what each states it is good to.
From the barrel's surface down, a 3/16 screw ends 0.008 in inside the foot's flat (0.570 less the journal's .375 is 0.195 of thread), as the photos of the underside show them: just below flush.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Gas block journal
- Barrels
- Aero Precision 16" 5.56 CMV barrel, mid-length, BCM Standard 11.5" Carbine Barrel, Stripped, BCM Standard 14.5" Mid Length Barrel, Stripped, BCM Standard 16" Mid Length Barrel, Stripped, Bear Creek Arsenal BC-15 5.56 NATO, 16" Parkerized M4 Barrel, 1:7 Twist, Mid-Length Gas System, Daniel Defense CHF Chrome Lined 5.56 AR-15 Barrel - Carbine - Government - 10.3", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 13.9", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 14.5", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 16", Rosco Manufacturing Bloodline 10.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 11.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 12.5" M4 5.56 NATO
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $89.99 Melonite Nov 21, 2026, in stock that day
- Dirty Bird Industries $94.99 Melonite Nov 21, 2026, in stock that day
- AR15Discounts $89.99 Melonite Nov 21, 2026, out of stock that day
- Dirty Bird Industries $89.99 Stainless Steel, Matte Nov 21, 2026, out of stock that day
- AR15Discounts $89.99 Stainless Steel, Matte Nov 21, 2026, out of stock that day
- Right To Bear $94.95 Melonite Nov 21, 2026, out of stock that day
- Right To Bear $94.95 Stainless Steel, Matte Nov 21, 2026, out of stock that day