Gas block
BCM Front Sight Base F - FSB (ID .750) - Milspec for Flat Top Uppers
Bravo Company's forged, F-marked A2 front sight base for a .750 journal: the taller base a flat-top upper's rear sight needs (BCM: "Mil-Spec for rifles issued to the troops require taller front sight bases on all flat top AR rifles."). Sold as the base alone, not yet drilled for its taper pins: "Not included are front sight post assembly, sling swivel assembly, and taper pins." Drawn as installed, with its two taper pins (BCM sells them as a set of two, TAPER-PINS-FSB-SET-2) and without a swivel; its post is a part of its own.

- Weight
- 5.56 oz ± 0.4 oz Provisionalworked out: The model's volume times std.density.steel: worked out from the figures in this ledger, not a reading.
- Lowest price
- $29.95 at Primary Arms, read Nov 21, 2026
- Maker's number
- Front-Sight-Base-F-750
- Colour
- Phosphate, black
- Drawn as
- modelled
- Maker's page
- bravocompanyusa.com
In “Drop-in 16 in, Stealth Gray on BCM's MK2 lower”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Bore (the journal it fits: .750 or .625)0.75 in ± 0.001 in 19 mmConfirmedPublished: Bravo Company USA, Front Sight Base F - FSB (ID .750) - Milspec for Flat Top Uppers (Front-Sight-Base-F-750), its name and its description ("(.750")"), the maker, read Oct 28, 2026
Published “Front Sight Base F - FSB (ID .750) - Milspec for Flat Top Uppers” used
Bravo Company USA, Front Sight Base F - FSB (ID .750) - Milspec for Flat Top Uppers (Front-Sight-Base-F-750), its name and its description ("(.750")"), the maker, read Oct 28, 2026 the page, harvested Oct 28, 2026
Model 0.75 in ± 0.001 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the bore, a cylinder r 0.375 on its z axis through both rings
The maker's figure; the CAD set's base is bored the same.
BCM's .625 base is another product (Front Sight Base F - FSB (ID .625)).
Length along the barrel, the rear face to the rings' front face1.804 in ± 0.005 in 45.8 mmCorroboratedModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 1.804 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the rear face (plane z -1.804) to the front face (plane z 0, from the ring's foot to the tower's top)
Photo 1.816 in ± 0.012 in
Primary Arms Front-Sight-Base-F-750_01.jpg: BCM's base from its right side, straight on, the muzzle at the right, 2200 x 1467, harvested
Scale: frame from the reviewed holes pin, rear (365.7 px/in): the roll pin's hole and the rear face on its row, .688 apart (8448566). Read by x_max less x_min of the traced outline on the rings' rows (y -0.2 to 0.6): 1.542 + 0.274 (the 215 level, which keeps the front face's lit edge)
The CAD set's faces; BCM's own base in the side photo agrees within 0.012 in.
Not published. The Army's drawing gives 1.750 for its .625 base (8448566, side view), which isn't this one's ring.
The bayonet lug's front face ahead of the rings' front face0.314 in ± 0.015 in 8 mmCorroboratedPhoto: Primary Arms Front-Sight-Base-F-750_01.jpg: BCM's base from its right side, straight on, the muzzle at the right, 2200 x 1467
Model 0.325 in ± 0.005 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the lug's front face, plane z 0.325
Photo 0.314 in ± 0.015 in used
Primary Arms Front-Sight-Base-F-750_01.jpg: BCM's base from its right side, straight on, the muzzle at the right, 2200 x 1467, harvested
Scale: frame from the reviewed holes pin, rear (365.7 px/in): the roll pin's hole and the rear face on its row, .688 apart (8448566). Read by the outline's x_max (the lug's front, 1.856) less its x_max on the rings' rows (1.542)
BCM's own base: its side outline, which the model draws, ends here; the CAD set's lug is 0.011 longer, within the two readings' ±.
Its gas port ahead of its rear face0.27 in ± 0.002 in 6.9 mmConfirmedStandard: US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, side view: the .125 gas port from the rear face
Standard “.270 ±.002” used
US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, side view: the .125 gas port from the rear face, from the site owner
Model 0.27 in ± 0.002 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the port's .145 counterbore, a cylinder on y at z -1.534: 0.270 ahead of the rear face
The drawing; the CAD set's .750 base has the same.
The gas tube's roll pin hole ahead of the rear face0.688 in ± 0.003 in 17.5 mmConfirmedStandard: US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, side view: the .078 roll pin hole from the rear face
Standard “.688 ±.003” used
US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, side view: the .078 roll pin hole from the rear face, from the site owner
The gas tube's pin hole ahead of the port0.418 in ± 0.004 in 10.6 mmConfirmedWorked out: {.pin_hole_from_rear} - {.port_from_rear}
Worked out 0.418 in ± 0.004 in used
{.pin_hole_from_rear} - {.port_from_rear}
Standard “.418 ±.002”
US Army TDP drawing 8448567 (Gas Tube Assembly), rev F, PDF page 144: the .078 pin hole to the .125 gas hole, from the site owner
The base's own two callouts; the tube's drawing puts its gas hole the same distance behind its pin, as it must.
The roll pin's cross hole, diameter0.078 in ± 0.003 in 2 mmConfirmedStandard: US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, side view
Standard “.078 DIA +.003 THRU” used
US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, side view, from the site owner
The gas tube's hole, its axis above the bore0.625 in ± 0.003 in 15.9 mmConfirmedStandard: US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, rear end view: the gas tube's hole above the barrel's hole
Standard “.625 ±.003” used
US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, rear end view: the gas tube's hole above the barrel's hole, from the site owner
Model 0.625 in ± 0.002 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the tube's hole, a cylinder r 0.0902 along z at y 0.625
The drawing; the CAD set has the same.
The gas tube's hole, diameter0.18 in ± 0.001 in 4.6 mmConfirmedStandard: US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, side view
Standard “.1805 DIA +.0010” used
US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, side view, from the site owner
The gas tube's hole, its depth from the rear face0.905 in ± 0.015 in 23 mmConfirmedStandard: US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, side view and View A
Standard “.905 ±.015 DEPTH” used
US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, side view and View A, from the site owner
The post's axis ahead of the rear face1.45 in ± 0.005 in 36.8 mmConfirmedStandard: US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, side view: the rear face to the post's hole (a three-place figure: ±.005 by the title block)
Standard “1.450” used
US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, side view: the rear face to the post's hole (a three-place figure: ±.005 by the title block), from the site owner
Model 1.45 in ± 0.002 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the post's threaded hole, cylinders r 0.069 and 0.082 on y at z -0.354
The drawing; the CAD set has the same.
An A2 base's tower top (the floor between the wings the post rises from) above the bore2.285 in ± 0.01 in 58 mmConfirmedStandard: US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, front end view: the barrel's hole's centre to the floor between the wings
Standard “2.285 ±.010” used
US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, front end view: the barrel's hole's centre to the floor between the wings, from the site owner
The Army's base, for a carry handle's rear sight: not this one (post_seat_above_bore).
How much taller a flat-top's "F" base is than the A2's0.04 in ± 0.005 in 1 mmCorroboratedPublished: Windham Weaponry shop, Front Sight Post 040 Height (SKU 9349056-mod), Description, a seller, read Oct 28, 2026
Published “For use with the Colt A4 Removable Carry Handle or other “Mil-Spec” height carry handles or rear flip sights , the .040 taller Sight Post is required in the A2 Standard Front Sight Base on carbine length sighting planes .” used
Windham Weaponry shop, Front Sight Post 040 Height (SKU 9349056-mod), Description, a seller, read Oct 28, 2026 the page, harvested Oct 28, 2026
Published “how it really doesn’t make a great deal of difference whether the front sight base is the taller “F” marked or not. It usually boils down to a few extra clicks of front sight post adjustment which if excessive, can easily be remedied with a .040″ taller front sight post.”
Windham Weaponry, "Why don’t you use ‘F’ marked front sight bases?", a review, read Oct 28, 2026 the page, harvested Oct 28, 2026
The product page states the figure for the flat-top's carry handle; the article says the same post makes up the F base's height.
BCM: "Mil-Spec for rifles issued to the troops require taller front sight bases on all flat top AR rifles." and "Designed to match the height of Mil-Spec height rear iron sights." (no figure). Windham Weaponry sells a post .040 taller for an A2 base under a flat-top's carry handle, and says that post makes up the F base's height. Two of one maker's pages; no drawing of the F base is on file.
The tower's top (the floor between the wings the post rises from) above the bore2.325 in ± 0.015 in 59.1 mmCorroboratedWorked out: {.a2_post_seat_above_bore} + {.f_over_a2}
Worked out 2.325 in ± 0.015 in used
{.a2_post_seat_above_bore} + {.f_over_a2}
Where the post's anchor is (the interface's "top of the tower"). The A2's drawn height and the F's difference.
Top above the bore axis (the wings' tips)2.615 in ± 0.02 in 66.4 mmProvisionalPhoto: Primary Arms Front-Sight-Base-F-750_01.jpg: BCM's base from its right side, straight on, the muzzle at the right, 2200 x 1467
Photo 2.615 in ± 0.02 in used
Primary Arms Front-Sight-Base-F-750_01.jpg: BCM's base from its right side, straight on, the muzzle at the right, 2200 x 1467, harvested
Scale: frame from the reviewed holes pin, rear (365.7 px/in, rms 0.000 in over 2 points). Read by y_max of the traced outline (tools/trace.py); the wings' tips: the outline's top, above the bore's axis, which lies .625 below the roll pin's hole (the tube's axis: 8448566)
Not published. The wings' rounded tips, the base's highest point, as BCM's base shows them in the side photo.
The rings' outside radius about the bore0.44 in ± 0.005 in 11.2 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.44 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the rings' round upper part, cylinders r 0.44 on its z axis (the rear ring's, z -1.804 to -1.394; the front ring's a torus 0.41 + 0.03 at its edge)
Both rings, the round part above the flats at their feet. The Army's drawing's ring is a .625 base's.
The rings' feet: half their width across the flats0.375 in ± 0.003 in 9.5 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.375 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the planes x ±0.375 under both rings (from y -0.230 down to the rear ring's foot, from -0.239 to the front ring's)
Both rings come down square below the bore, their sides flat and their foot flat, as BCM's base's two photos show.
Where the rings' flat sides begin, below the bore0.23 in ± 0.01 in 5.8 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.23 in ± 0.01 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the planes x ±0.375 begin at y -0.2302 (rear ring) and -0.2385 (front ring), where they meet the round of r 0.44
The rear ring's length from the rear face0.44 in ± 0.005 in 11.2 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.44 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the rear face (z -1.804) to the rear ring's front face (plane z -1.364)
The front ring's length behind the front face0.458 in ± 0.005 in 11.6 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.458 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the front ring's rear face (plane z -0.458) to the front face (z 0)
The rear ring's flat foot below the bore0.509 in ± 0.005 in 12.9 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.509 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the plane y -0.5088 under the rear ring, between the swivel's ears and the flats
The front ring's flat foot below the bore0.475 in ± 0.005 in 12.1 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.475 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the plane y -0.475 under the front ring, each side of the bayonet lug's stem
The gas tube's boss between the legs: half its width0.155 in ± 0.003 in 3.9 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.155 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the boss's sides, planes x ±0.155 from z -1.661 to -0.165 (y 0.478 to 0.696)
The bar the gas tube runs in, between the two legs, over the gap between the rings (both photos).
The boss's top above the bore0.834 in ± 0.005 in 21.2 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.834 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by its top, plane y 0.8337 (between its rounds of r 0.149 about y 0.696)
The boss's top edges: their radius0.149 in ± 0.005 in 3.8 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.149 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by cylinders r 0.1492 along z about (x ±0.006, y 0.6957)
The rear leg at its foot: the rear face to its front face0.143 in ± 0.003 in 3.6 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.143 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the rear face (z -1.804) to the plane z -1.661 that the window's foot and the boss's rear end stand on
The front leg's rear face, ahead of the rear face1.639 in ± 0.005 in 41.6 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 1.639 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the plane z -0.165 (the window's front side, from the rings up to y 1.986)
The window's top above the bore1.986 in ± 0.005 in 50.4 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 1.986 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the plane y 1.9857 between the sloped rear leg and the front leg (z -0.786 to -0.165)
The tower's sides at their foot: half the width0.438 in ± 0.003 in 11.1 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.4384 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the tower's two side planes (normals ±(0.9963, 0.086, 0)) at their foot, (±0.4384, 0.0378): the sides lean in going up
The tower's sides' foot above the bore0.038 in ± 0.003 in 1 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.038 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the side planes' lowest vertices, y 0.0378, where they meet the rings' round
The tower's sides at their top (under the wings): half the width0.239 in ± 0.003 in 6.1 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.239 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the side planes' highest vertices, (±0.239, 2.3487), where the wings' outer faces begin
The tower's sides' top below the floor between the wings0.005 in ± 0.003 in 0.1 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.005 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the side planes end at y 2.3487, the floor between the wings (planes y 2.3537) 0.005 above
Taken from the CAD set's own floor, so that it moves with the F base's floor.
The slot between the wings: half its width0.156 in ± 0.003 in 4 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.156 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by planes x ±0.156 from the floor (y 2.3537) up to 2.4044, where the wings' inner arcs begin
The wings' arcs: their centre above the floor between the wings0.051 in ± 0.003 in 1.3 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.0507 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the arcs' axis at y 2.4044 against the floor's planes at y 2.3537
The wings' arcs: their centre out from the middle0.884 in ± 0.005 in 22.5 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.8842 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by cylinders r 0.7282 and 0.6476 along z about (±0.8842, 2.4044)
The wings' inner faces: their radius0.728 in ± 0.003 in 18.5 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.7282 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by cylinders r 0.7282 about (±0.8842, 2.4044)
The wings' outer faces: their radius0.648 in ± 0.003 in 16.4 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.6476 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by cylinders r 0.6476 about (±0.8842, 2.4044)
The wings' tips above the floor between them0.218 in ± 0.005 in 5.5 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.2176 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the wings' highest vertices, y 2.5713, against the floor at 2.3537
The CAD set's base. In BCM's photo the wings' tips stand height_above_bore over the bore.
The sling swivel's ears: half the width outside them0.222 in ± 0.003 in 5.6 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.222 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by planes x ±0.222 (z -1.734 to -1.444, y -0.714 to -0.539)
The gap between the swivel's ears: half its width0.119 in ± 0.003 in 3 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.1195 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by planes x ±0.1195 (z -1.798 to -1.395, y -0.714 to -0.500)
The swivel's ears: their rear faces ahead of the rear face0.04 in ± 0.005 in 1 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.04 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by planes z -1.764 against the rear face z -1.804
The swivel's ears: their length along the bore0.35 in ± 0.005 in 8.9 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.35 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by planes z -1.764 to -1.414
The swivel's rivet hole, diameter0.129 in ± 0.003 in 3.3 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.129 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by cylinders r 0.0645 along x through both ears
The Army's drawing has the same, .129 DIA THRU (8448566, side view).
The swivel's rivet hole ahead of the rear face0.223 in ± 0.008 in 5.7 mmCorroboratedPhoto: Primary Arms Front-Sight-Base-F-750_01.jpg: BCM's base from its right side, straight on, the muzzle at the right, 2200 x 1467
Model 0.215 in ± 0.005 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by its axis at z -1.589
Photo 0.223 in ± 0.008 in used
Primary Arms Front-Sight-Base-F-750_01.jpg: BCM's base from its right side, straight on, the muzzle at the right, 2200 x 1467, harvested
Scale: frame from the reviewed holes pin, rear (365.7 px/in): the roll pin's hole and the rear face on its row, .688 apart (8448566). Read by the see-through hole's centre, a circle through its rim's 50% crossings on 180 rays at (793.5, 1289.4), 39 px across (both ears' holes overlapping): 81.5 px ahead of the rear face (column 712)
BCM's own base: its ear, in the side outline the model draws, is round about this hole. The CAD set's is 0.008 behind it, within the two readings' ±.
The swivel's rivet hole below the bore0.653 in ± 0.008 in 16.6 mmConflictPhoto: Primary Arms Front-Sight-Base-F-750_01.jpg: BCM's base from its right side, straight on, the muzzle at the right, 2200 x 1467
Model 0.69 in ± 0.005 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by its axis at y -0.69
Photo 0.653 in ± 0.008 in used
Primary Arms Front-Sight-Base-F-750_01.jpg: BCM's base from its right side, straight on, the muzzle at the right, 2200 x 1467, harvested
Scale: frame from the reviewed holes pin, rear (365.7 px/in): the roll pin's hole and the rear face on its row, .688 apart (8448566). Read by the same centre, 467.3 px below the roll pin's hole, which is .625 above the bore (8448566)
BCM's own base: its ear, in the side outline the model draws, is round about this hole (0.22 above its foot). The CAD set's hole and the Army's drawing's are 0.037 lower, on a .625 base's and a third-party model's ears: kept visible.
model and photo differ by 0.037 in beyond what each states it is good to.
The Army's drawing gives .69 from the bore's centre line to the hole (8448566, side view).
The swivel's ears: the radius of their round foot about the hole0.175 in ± 0.005 in 4.4 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.175 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by tori 0.145 + 0.03 about the axis (y -0.7137, z -1.589)
The bayonet lug's stem: half its width0.137 in ± 0.003 in 3.5 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.137 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by planes x ±0.137 (y -0.475 to -0.67, z -0.375 to 0.325)
The bayonet lug's T: half its width0.222 in ± 0.003 in 5.6 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.2215 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by planes x ±0.2215 (y -0.67 to -0.848)
The bayonet lug's T: its top below the bore0.67 in ± 0.005 in 17 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.67 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by planes y -0.67 (the stem's foot, the T's shoulders)
The bayonet lug's rear end behind the front face0.375 in ± 0.005 in 9.5 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.375 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by plane z -0.375 (the lug's rear end under the front ring)
The taper pin's hole through the ring, diameter0.141 in ± 0.003 in 3.6 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.141 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by a cylinder r 0.0705 along x through the rear ring
The Army's pin is .1419 at its big end (8448575).
The rear taper pin's hole ahead of the rear face0.206 in ± 0.005 in 5.2 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.2065 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by its axis at z -1.5975
BCM's base comes undrilled (not yet drilled for taper pins): the holes are a gunsmith's, drilled through base and barrel. The CAD set has one, in the rear ring.
The taper pins' holes below the bore0.347 in ± 0.005 in 8.8 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.347 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the rear pin's axis at y -0.3474: inside the journal's 0.375, so the pin crosses the barrel's underside
The front taper pin's hole behind the front face0.229 in ± 0.05 in 5.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: the front ring's middle along its length (front_ring_length, 0.458, halved), at the rear pin's height. No drawing or photo on file shows a drilled base's front pin.
Worked out 0.229 in ± 0.05 in used
An assumption for the drawing, not a reading: the front ring's middle along its length (front_ring_length, 0.458, halved), at the rear pin's height. No drawing or photo on file shows a drilled base's front pin., harvested
The CAD set draws one pin hole (the rear ring's); the front ring's is where no source on file says.
A taper pin's length0.845 in ± 0.02 in 21.5 mmConfirmedStandard: US Army TDP drawing 8448575 (Pin, Taper, Front Sight), rev H, PDF page 147
Standard “.845 ±.020” used
US Army TDP drawing 8448575 (Pin, Taper, Front Sight), rev H, PDF page 147, from the site owner
A taper pin's large end, diameter0.142 in ± 0.0005 in 3.6 mmConfirmedStandard: US Army TDP drawing 8448575 (Pin, Taper, Front Sight), rev H, PDF page 147
Standard “.1419 DIA REF” used
US Army TDP drawing 8448575 (Pin, Taper, Front Sight), rev H, PDF page 147, from the site owner
A taper pin's small end, diameter0.125 in ± 0.0005 in 3.2 mmConfirmedStandard: US Army TDP drawing 8448575 (Pin, Taper, Front Sight), rev H, PDF page 147
Standard “.1251 DIA REF” used
US Army TDP drawing 8448575 (Pin, Taper, Front Sight), rev H, PDF page 147, from the site owner
The post's counterbore at the tower's top, diameter0.375 in ± 0.005 in 9.5 mmConfirmedStandard: US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, top view
Standard “.375 +.005 C'BORE TO DEPTH SHOWN” used
US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, top view, from the site owner
The post's counterbore: its floor below the tower's top0.227 in ± 0.02 in 5.8 mmConfirmedStandard: US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, side view's section through the tower
Standard “.227 ±.020” used
US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, side view's section through the tower, from the site owner
The drawing's section through the tower: the floor the post's flange sits on, where the thread begins.
The post's threaded hole, its major diameter0.164 in ± 0.002 in 4.2 mmConfirmedStandard: US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, top view
Standard “8-36 UNF-2B MODIFIED TO DEPTH SHOWN ... MAJOR DIA .1640 MIN” used
US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, top view, from the site owner
The post's threaded hole, its depth from the tower's top0.738 in ± 0.01 in 18.7 mmConfirmedStandard: US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, side view's section through the tower
Standard “.738 ±.010” used
US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, side view's section through the tower, from the site owner
The break along its edges0.01 in ± 0.005 in 0.3 mmConfirmedStandard: US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, note 6: the middle of .005 to .015
Standard “BREAK SHARP EDGES .005+.010 UNLESS OTHERWISE SPECIFIED” used
US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, note 6: the middle of .005 to .015, from the site owner
The post's detent hole, diameter0.171 in ± 0.003 in 4.3 mmConfirmedStandard: US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, top view: beside the post's hole, in the counterbore's floor
Standard “.171 DIA +.003 TO DEPTH SHOWN” used
US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, top view: beside the post's hole, in the counterbore's floor, from the site owner
Model 0.171 in ± 0.002 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by a cylinder r 0.0855 along y at z -0.151
The drawing; the CAD set has the same.
The detent hole's axis ahead of the post's0.203 in ± 0.002 in 5.2 mmConfirmedStandard: US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, side view: the post's axis to the detent hole's
Standard “.203 ±.002” used
US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, side view: the post's axis to the detent hole's, from the site owner
Model 0.203 in ± 0.002 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the detent hole's axis at z -0.151 against the post's at z -0.354: ahead of it, toward the muzzle
The drawing; the CAD set has it at the same place, and says which way (toward the muzzle).
Under the post's flange: the detent rides on the .400 circle the flange's notches are on (9349056).
The detent hole's depth below the counterbore's floor0.511 in ± 0.01 in 13 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base
Model 0.511 in ± 0.01 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a .750 front sight base, from the site owner
Read by the hole from y 1.6158 up to the counterbore's floor (its .375 cylinder's foot, y 2.1267)
The drawing's "TO DEPTH SHOWN" is drawn, not dimensioned.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Gas block journal
- Barrels
- Aero Precision 16" 5.56 CMV barrel, mid-length, BCM Standard 11.5" Carbine Barrel, Stripped, BCM Standard 14.5" Mid Length Barrel, Stripped, BCM Standard 16" Mid Length Barrel, Stripped, Bear Creek Arsenal BC-15 5.56 NATO, 16" Parkerized M4 Barrel, 1:7 Twist, Mid-Length Gas System, Daniel Defense CHF Chrome Lined 5.56 AR-15 Barrel - Carbine - Government - 10.3", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 13.9", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 14.5", Geissele Automatics CHF Chrome Lined Barrel - 5.56 - 16", Rosco Manufacturing Bloodline 10.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 11.5" M4 5.56 NATO, Rosco Manufacturing Bloodline 12.5" M4 5.56 NATO
Gas tube
Handguard cap seat
Front sight post seat
- Front sight posts
- Aero Precision AR15 Front Sight Post Kit
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $29.95 Nov 21, 2026, in stock that day
- BCM $29.95 Nov 21, 2026, out of stock that day