Front sight post
Aero Precision AR15 Front Sight Post Kit
Aero Precision's mil-spec front sight post kit: the A2 post, its detent and the detent's spring (KYGUNCO's page: "AR15 A2 Front Sight AR15 Front Sight Detent AR15 Front Sight Detent Spring"), "intended for use in AR15's that have a front sight base (FSB)". The post screws into the base's tower and the spring-loaded detent holds it at each quarter turn; it is drawn screwed down onto the counterbore's floor, and the detent and its spring, under its flange in the base, aren't drawn. Aero's own page for the number wasn't found; BCM's shop lists no post of its own.

- Weight
- 0.11 oz ± 0.01 oz Conflictworked out: (0.0143 + 3.14159265 * ({.detent_d} * {.detent_d} / 4 * {.detent_length} + {.detent_tip_d} * {.detent_tip_d} / 4 * {.detent_tip_length})) * {std.density.steel}Its sources span 0.1 oz to 24 oz.
- Lowest price
- $8.99 at AR15Discounts, read Nov 21, 2026, out of stock that day
- Maker's number
- APRH100526C
- Colour
- Phosphate, black
- Drawn as
- modelled
- Maker's page
- kygunco.com
In “Drop-in 16 in, Stealth Gray on BCM's MK2 lower”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Height above the tower's top0.101 in ± 0.025 in 2.6 mmConfirmedWorked out: {.flange_thickness} + {.blade_height} - {.seat_below_tower_top}
Worked out 0.101 in ± 0.025 in used
{.flange_thickness} + {.blade_height} - {.seat_below_tower_top}
The blade's top above the base's tower top, the post screwed down onto the counterbore's floor. Turned up, it stands higher by a 36th of an inch a turn (its thread): its height on a rifle is set when it is zeroed.
Its flange's underside below the tower's top (the base's counterbore floor)0.227 in ± 0.02 in 5.8 mmConfirmedStandard: US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, the side view's section through the tower: the post's counterbore, from the tower's top to the floor where the thread begins
Standard “.227 ±.020” used
US Army TDP drawing 8448566 (Sight, Front), rev H, PDF page 145, the side view's section through the tower: the post's counterbore, from the tower's top to the floor where the thread begins, from the site owner
The post's seat: its flange bottomed in the base's counterbore. The Army's base's figure, which every A2 base made to the drawing has (BCM's F base calls itself "Milspec"). Its frame's origin is the tower's top on its axis (the front sight post interface).
The blade, across its flats (it is square)0.07 in ± 0.002 in 1.8 mmConfirmedStandard: US Army TDP drawing 9349056 (Post, Front Sight), rev G, PDF page 178, side view: the middle of .068 to .072
Standard “.072 -.004 2 PLACES” used
US Army TDP drawing 9349056 (Post, Front Sight), rev G, PDF page 178, side view: the middle of .068 to .072, from the site owner
The blade's top above the flange's top0.268 in ± 0.005 in 6.8 mmConfirmedStandard: US Army TDP drawing 9349056 (Post, Front Sight), rev G, PDF page 178, side view: the middle of .263 to .273
Standard “.273 -.010” used
US Army TDP drawing 9349056 (Post, Front Sight), rev G, PDF page 178, side view: the middle of .263 to .273, from the site owner
The flange, its diameter0.364 in ± 0.0015 in 9.3 mmConfirmedStandard: US Army TDP drawing 9349056 (Post, Front Sight), rev G, PDF page 178, top view
Standard “.366 -.003 Ø” used
US Army TDP drawing 9349056 (Post, Front Sight), rev G, PDF page 178, top view, from the site owner
Model 0.366 in ± 0.002 in
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of a front sight post, from the site owner
Read by its flange, cylinders r 0.183 between its notches
The drawing; the CAD set's post has its nominal.
The flange, its thickness0.06 in ± 0.005 in 1.5 mmConfirmedStandard: US Army TDP drawing 9349056 (Post, Front Sight), rev G, PDF page 178, side view: the middle of .055 to .065
Standard “.065 -.010” used
US Army TDP drawing 9349056 (Post, Front Sight), rev G, PDF page 178, side view: the middle of .055 to .065, from the site owner
The flange's detent notches, their radius0.047 in ± 0.0013 in 1.2 mmConfirmedStandard: US Army TDP drawing 9349056 (Post, Front Sight), rev G, PDF page 178, top view
Standard “.0455 +.0025 R 4 RADII EQUALLY SPACED ON .400 Ø” used
US Army TDP drawing 9349056 (Post, Front Sight), rev G, PDF page 178, top view, from the site owner
Four, equally spaced: the detent holds the post at each quarter turn.
The circle the notches' centres are on0.4 in ± 0.0005 in 10.2 mmConfirmedStandard: US Army TDP drawing 9349056 (Post, Front Sight), rev G, PDF page 178, top view
Standard “.400 Ø (basic)” used
US Army TDP drawing 9349056 (Post, Front Sight), rev G, PDF page 178, top view, from the site owner
The threaded shank's length under the flange0.46 in ± 0.01 in 11.7 mmConfirmedStandard: US Army TDP drawing 9349056 (Post, Front Sight), rev G, PDF page 178, side view: the middle of .45 to .47
Standard “.47 -.02” used
US Army TDP drawing 9349056 (Post, Front Sight), rev G, PDF page 178, side view: the middle of .45 to .47, from the site owner
The unthreaded neck under the flange0.062 in ± 0.005 in 1.6 mmConfirmedStandard: US Army TDP drawing 9349056 (Post, Front Sight), rev G, PDF page 178, side view: the middle of .057 to .067
Standard “.057 +.010” used
US Army TDP drawing 9349056 (Post, Front Sight), rev G, PDF page 178, side view: the middle of .057 to .067, from the site owner
The thread's major diameter0.16 in ± 0.0027 in 4.1 mmConfirmedStandard: US Army TDP drawing 9349056 (Post, Front Sight), rev G, PDF page 178
Standard “.164-36 UNF-2A ... MAJOR DIA .1577-.1632” used
US Army TDP drawing 9349056 (Post, Front Sight), rev G, PDF page 178, from the site owner
The thread's pitch diameter0.144 in ± 0.0014 in 3.7 mmConfirmedStandard: US Army TDP drawing 9349056 (Post, Front Sight), rev G, PDF page 178
Standard “PITCH DIA .1424-.1452” used
US Army TDP drawing 9349056 (Post, Front Sight), rev G, PDF page 178, from the site owner
The thread's pitch0.028 in ± 0 in 0.7 mmConfirmedStandard: US Army TDP drawing 9349056 (Post, Front Sight), rev G, PDF page 178: 36 threads to the inch
Standard “.164-36 UNF-2A” used
US Army TDP drawing 9349056 (Post, Front Sight), rev G, PDF page 178: 36 threads to the inch, from the site owner
The shank's end chamfer0.025 in ± 0.005 in 0.6 mmConfirmedStandard: US Army TDP drawing 9349056 (Post, Front Sight), rev G, PDF page 178, side view
Standard “.020 +.010 ... 43° +4°” used
US Army TDP drawing 9349056 (Post, Front Sight), rev G, PDF page 178, side view, from the site owner
The detent, its body's diameter0.165 in ± 0.003 in 4.2 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the front sight detent
Model 0.165 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the front sight detent, from the site owner
Read by its body, a cylinder r 0.0825
In the base's .171 hole (8448566): the detent is out of sight under the post's flange, and only weighed.
The detent, its body's length0.435 in ± 0.005 in 11 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the front sight detent
Model 0.435 in ± 0.005 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the front sight detent, from the site owner
Read by its body, from y -0.498 to -0.063
The detent's tip, its diameter0.085 in ± 0.003 in 2.2 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the front sight detent
Model 0.085 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the front sight detent, from the site owner
Read by its tip, a cylinder r 0.0425
The detent's tip, its length0.063 in ± 0.003 in 1.6 mmProvisionalModel: the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the front sight detent
Model 0.063 in ± 0.003 in used
the AR-15 CAD reference set the user supplied, Deterrence Dispensed V11: a third-party model of the front sight detent, from the site owner
Read by its tip, from y -0.063 to 0
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Front sight post seat
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- AR15Discounts $8.99 Nov 21, 2026, out of stock that day
- KYGUNCO $11.99 Nov 21, 2026, out of stock that day