Vertical grip
Magpul M-LOK MVG vertical grip
Magpul's M-LOK MVG: a 3 in polymer vertical grip with the TSP texture, mounting directly to M-LOK slots with two T-nuts. Black, FDE, ODG, Stealth Gray (and Modified Coyote Brown, 2026).

- Weight
- 1.4 oz ± 0.05 oz Confirmedpublished: Magpul, M-LOK MVG Vertical Grip (MAG597), Technical Specifications, the maker, read Oct 2, 2026
- Lowest price
- $19.50 at Wing Tactical, read Nov 21, 2026
- Maker's number
- MAG597
- Colours
- Black, FDE, Modified Coyote Brown, ODG, Stealth Gray
- Drawn as
- modelled
- Maker's page
- magpul.com
Added to “22RB .22 LR rifle”, a build on the start page, where the designer starts a new vertical grip.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Height (how far it stands off the handguard's face)3 in ± 0.05 in 76.2 mmConfirmedPublished: Magpul, M-LOK MVG Vertical Grip (MAG597), Technical Specifications, the maker, read Oct 2, 2026
Published “Length 3.0 in.” used
Magpul, M-LOK MVG Vertical Grip (MAG597), Technical Specifications, the maker, read Oct 2, 2026 the page, harvested Oct 2, 2026
Published “Height: 3"”
Wing Tactical, Magpul MVG M-LOK Vertical Grip (MAG-597), Specifications (source of the figures unstated), a seller, read Oct 2, 2026 the page, harvested Oct 2, 2026
The maker's figure; the retailer's is the same number under another name.
Magpul calls the grip's long dimension its length; installed, it stands that far off the handguard. Wing Tactical prints the same figure as the height.
Overall length (along the handguard)1.54 in ± 0.02 in 39.1 mmProvisionalPublished: Wing Tactical, Magpul MVG M-LOK Vertical Grip (MAG-597), Specifications (source of the figures unstated), a seller, read Oct 2, 2026
Published “Length: 1.54"” used
Wing Tactical, Magpul MVG M-LOK Vertical Grip (MAG-597), Specifications (source of the figures unstated), a seller, read Oct 2, 2026 the page, harvested Oct 2, 2026
One retailer's figure, whose source isn't stated. The side photo (tools/trace.py, dims calibration) scales by this and the height together and requires them to agree within 2%: they do (the plate's 580 px over the grip's 1119 px is 1.555 for 3.0).
Width (side to side)1.17 in ± 0.02 in 29.7 mmProvisionalPublished: Wing Tactical, Magpul MVG M-LOK Vertical Grip (MAG-597), Specifications (source of the figures unstated), a seller, read Oct 2, 2026
Published “Width: 1.17"” used
Wing Tactical, Magpul MVG M-LOK Vertical Grip (MAG-597), Specifications (source of the figures unstated), a seller, read Oct 2, 2026 the page, harvested Oct 2, 2026
One retailer's figure, whose source isn't stated, and nothing on file checks it: no straight end view of the grip is on any page found (Magpul's gallery _02, 1.54 in across for 3.0 tall, is the long side again). The 3/4 photos show the plate as an obround about that wide.
M-LOK slots its lugs span1ConfirmedPublished: Magpul, MOE M-LOK MVG installation instructions (MAG597_MOE_M-LOK_MVG_INSRT.pdf), Step 3, the maker, read Oct 2, 2026
Published “Align the MVG using the two M-LOK lugs. Place the M-LOK T-Nuts and lugs into the slot at the desired location.” used
Magpul, MOE M-LOK MVG installation instructions (MAG597_MOE_M-LOK_MVG_INSRT.pdf), Step 3, the maker, read Oct 2, 2026 the page, harvested Oct 2, 2026
Both lugs and both T-nuts go into one slot: the two nuts sit the M-LOK interval (20 mm) apart inside a 32 mm slot (lug_spacing). The sheet names the slot in the singular, and its Step 3 picture shows the grip under one slot.
Rear lug's centre ahead of the part's rear end0.383 in ± 0.03 in 9.7 mmProvisionalPhoto: Primary Arms MAG597-ODG_00.jpg: the MVG alone on white, upright with its T-nuts on top, a straight side view along the handguard, 2000 x 1334
Photo 0.383 in ± 0.03 in used
Primary Arms MAG597-ODG_00.jpg: the MVG alone on white, upright with its T-nuts on top, a straight side view along the handguard, 2000 x 1334, harvested
Scale: the plate's length, 580 px (712 to 1292) = magpul-mlok-mvg.length 1.54 in: 376.6 px/in; the grip's height, 1119 px (136 to 1255) = magpul-mlok-mvg.height 3.0 in: 373 px/in. The two agree within 1%; 375 px/in used. Read by same-plane ratio on a 3x gridded crop: the T-nut stems' centres (853 and 1145 px) against the plate's ends (712 and 1292 px); 0.373 from the left end and 0.392 from the right, the mean recorded with the difference in the ±
The two T-nuts are centred on the plate (0.37 and 0.39 in from either end); the grip is symmetric fore and aft, and Magpul's FAQ says an M-LOK accessory mounts facing either way, so which end is the rear is the user's choice (`flipped`).
Distance between the two T-nuts (centre to centre)0.779 in ± 0.02 in 19.8 mmProvisionalPhoto: Primary Arms MAG597-ODG_00.jpg, as above
Photo 0.779 in ± 0.02 in used
Primary Arms MAG597-ODG_00.jpg, as above, harvested
Scale: 375 px/in (the plate's length and the grip's height, agreeing within 1%). Read by the T-nut stems' centres, 853 and 1145 px: 292 px
19.8 mm: the M-LOK interval (std.mlok.interval, 20 mm), as a two-nut accessory that mounts within one slot has to have.
Reach inside the handguard (below the mounting face, tightened)No value yetMissingNo source yet
Not sourced. Magpul publishes no T-nut dimensions (its M-LOK FAQ: drawings of the nut are restricted pending an ITAR review), and the installation sheet sets the nut by the surface's thickness, not by a figure. Until one is found, the check against the handguard's room (data/interfaces.yaml, mlok) can't be made, and the app says so.
Grooves across each end (front and rear)16CorroboratedPhoto: Primary Arms MAG597-ODG_00.jpg: the MVG alone on white, upright with its T-nuts on top, a straight side view along the handguard, 2000 x 1334
Photo 16 count used
Primary Arms MAG597-ODG_00.jpg: the MVG alone on white, upright with its T-nuts on top, a straight side view along the handguard, 2000 x 1334, harvested
Scale: a count: none. Read by the silhouette's edge at each end, row by row (luminance 215, sub-pixel), against a line through its crests: 16 notches deeper than 4 px at each end, and one shallow step below them where the foot begins (4 px, the left end only), which isn't a groove
Photo 16 count
US D745,628 S, sheet 2, FIG. 2 front elevation, 300 dpi, harvested
Scale: a count: none. Read by the obrounds drawn down the front, counted
The part itself; the patent's drawing has the same number.
Grooves' pitch down the grip0.086 in ± 0.002 in 2.2 mmProvisionalPhoto: Primary Arms MAG597-ODG_00.jpg, as above
Photo 0.0856 in ± 0.002 in used
Primary Arms MAG597-ODG_00.jpg, as above, harvested
Scale: the side outline's scale: magpul-mlok-mvg.height and magpul-mlok-mvg.length together, 378.8 px/in (they agree within 1.3%, which is the ±). Read by a line through the 16 grooves' centres (each the middle of its half-depth crossings) at each end: 32.53 px a groove at the left end and 32.32 at the right, no centre more than 1.8 px off its line; the mean
The patent's FIG. 2 draws them 48.5 px apart where its body is 683 px wide: 0.083 in by the width on file, and 0.087 once its height is put to the grip's (its proportions are 5% off the figures on file).
First groove's centre below the mounting face1.389 in ± 0.01 in 35.3 mmProvisionalPhoto: Primary Arms MAG597-ODG_00.jpg, as above
Photo 1.389 in ± 0.01 in used
Primary Arms MAG597-ODG_00.jpg, as above, harvested
Scale: the side outline's scale, 378.8 px/in. Read by the fitted lines' first centres, row 660.1 at the left end and 665.4 at the right, below the outline's top (row 136.5): the mean. The two ends differ by 5 px across 585: the photo's half a degree of roll, which is the ±
Grooves' depth0.028 in ± 0.005 in 0.7 mmProvisionalPhoto: Primary Arms MAG597-ODG_00.jpg, as above
Photo 0.028 in ± 0.005 in used
Primary Arms MAG597-ODG_00.jpg, as above, harvested
Scale: the side outline's scale, 378.8 px/in. Read by each notch's deepest row below the line through the crests: 11.0 px on average at the left end (9.7 to 12.4) and 9.9 at the right (7.6 to 12.3); the mean of the two, with their spread in the ±
At the grip's middle, where the side view sees them. The patent's bottom plan (FIG. 7) has two lines inside its outline at each end that its sides don't have, 0.011 and 0.038 in in: neither is labelled, and nothing is taken from them.
Grooves' width (down the grip, at half their depth)0.048 in ± 0.006 in 1.2 mmProvisionalPhoto: Primary Arms MAG597-ODG_00.jpg, as above
Photo 0.048 in ± 0.006 in used
Primary Arms MAG597-ODG_00.jpg, as above, harvested
Scale: the side outline's scale, 378.8 px/in. Read by each notch's rows at or below half its depth: 19.7 px on average at the left end and 16.4 at the right; the mean of the two, their difference in the ±
The patent's FIG. 2 draws each obround 28 px tall at a 48.5 px pitch, 0.58 of it: 0.049 in at the pitch on file.
Grooves' length (across the grip, tip to tip as the front view sees them)0.7 in ± 0.02 in 17.8 mmProvisionalPhoto: US D745,628 S, sheet 2, FIG. 2 front elevation, 300 dpi
Photo 0.7 in ± 0.02 in used
US D745,628 S, sheet 2, FIG. 2 front elevation, 300 dpi, harvested
Scale: the body's width in the same figure, 683 px (columns 492 to 1175), as magpul-mlok-mvg.width 1.17 in: 584 px/in. Read by each obround's length, 408 px (columns 630 to 1038, centred on the body's middle within a pixel): 0.597 of the width. The ± is the lines' own 4 px and the width's ± at that share
The same in FIG. 3, the rear. The side photo agrees (dc38ca0e3fdf, at 378.8 px/in): its grooves' inner ends show 46 px in from the crests' edge at the left end and 47 at the right, 0.12 in, and the patent's section (profiles.plan) is 0.127 in in from its end at 0.35 in off the centre line. The bottom plan (FIG. 7) has a tick across its rim at each of four corners, 0.26 to 0.41 in off the centre line, where the grooved ends meet the sides.
Wall round the base's opening0.115 in ± 0.015 in 2.9 mmProvisionalPhoto: US D745,628 S, sheet 5, FIG. 7 bottom plan, 300 dpi
Photo 0.115 in ± 0.015 in used
US D745,628 S, sheet 5, FIG. 7 bottom plan, 300 dpi, harvested
Scale: the figure's outline, 955 x 721 px, as magpul-mlok-mvg.length 1.54 in and magpul-mlok-mvg.width 1.17 in: 620 and 616 px/in, 618 used. Read by the band from the outline to the innermost solid line, on the two centre lines: 74.5 px at each end (0.121 in) and 67 px at each side (0.108 in); the mean, the difference in the ±. The opening is 1.30 x 0.95 in
The grip is hollow and open at its base: the installation sheet's Step 1 is "Insert the Screws through the bottom of the M-LOK MVG and thread the T-Nuts with the “stem” of the nut facing towards the grip", and Magpul's photos from below (597_3, 597_5, gallery _03) show the opening and its rim. The innermost solid line of the bottom plan is taken to be the opening's edge: inside it the patent draws nothing but a broken line.
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
M-LOK
- Uppers
- Nordic Components 22RB .22 LR upper, 16" (fit unchecked), Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12" (fit unchecked), Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16" (fit unchecked)
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 12.7" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2 (fit unchecked), Aero Precision AR15 15" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 15" S-ONE M-LOK Handguard (fit unchecked), Aero Precision AR15 16.6" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 7.3" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 9.3" R-ONE M-LOK handguard (fit unchecked), BCM MCMR-10 (M-LOK® Compatible* Modular Rail) (fit unchecked), BCM MCMR-13 (M-LOK® Compatible* Modular Rail) (fit unchecked), BCM MCMR-15 (M-LOK® Compatible* Modular Rail) (fit unchecked), BCM PMCR (Polymer M-LOK® Compatible Rail)* Carbine Length-BLACK (fit unchecked), BCM PMCR (Polymer M-LOK® Compatible Rail)* Mid Length-BLACK (fit unchecked), Expo Arms Free Float AR-15 Handguard - M-LOK - 15" (fit unchecked), Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK (fit unchecked), Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK (fit unchecked), Geissele Automatics 15" Super Modular Rail MK16 M-LOK (fit unchecked), Magpul MOE SL® Hand Guard, Carbine-Length – AR15/M4 (fit unchecked), Magpul MOE SL® Hand Guard, Mid-Length – AR15/M4 (fit unchecked), Magpul MOE® M-LOK® Hand Guard, Carbine-Length – AR15/M4 (fit unchecked), Magpul MOE® M-LOK® Hand Guard, Mid-Length – AR15/M4 (fit unchecked), MAS Defense 12.62" NERO M-LOK FREE FLOAT (fit unchecked), MAS Defense 15" NERO M-LOK FREE FLOAT (fit unchecked), MAS Defense 9.87" NERO M-LOK FREE FLOAT (fit unchecked), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine) (fit unchecked), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length) (fit unchecked), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15") (fit unchecked)
- Adapter plates
- Magpul M-LOK Hand Stop MOE Adapter (fit unchecked)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Wing Tactical $19.50 Nov 21, 2026, in stock that day
- Primary Arms $21.80 Black Nov 21, 2026, in stock that day
- Primary Arms $21.80 ODG Nov 21, 2026, in stock that day
- Primary Arms $21.80 FDE Nov 21, 2026, in stock that day
- Magpul $22.95 Nov 21, 2026, stock not said
- Rifle Supply $26.99 FDE Nov 21, 2026, in stock that day