Sling mount
Magpul M-LOK QD Sling Mount
Magpul's M-LOK QD Sling Mount: a low steel mount for a push-button QD swivel, on any M-LOK slot. "Anti-rotation design stops sling from twisting and tangling"; "Accepts any push-button QD swivel as well as the Magpul QDM". Black. "Includes mounting hardware".

- Weight
- 0.62 oz Conflictpublished: Magpul, M-LOK QD Sling Mount (MAG606), Technical Specifications, the maker, read Oct 5, 2026Its sources span 0.45 oz to 0.63 oz.
- Lowest price
- $18.95 at Wing Tactical, read Nov 21, 2026
- Maker's number
- MAG606
- Colour
- Black (placeholder)
- Drawn as
- modelled
- Maker's page
- magpul.com
In “Aero 5.56 carbine, fitted out”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length (along the handguard)1.321 in ± 0.01 in 33.6 mmConflictPhoto: US D746,404 S (Magpul, 'Firearm quick detach mount for a sling'), FIG. 3 front elevation (the outer face), 300 dpi
Published “Length, Max: 1.3 in.”
Magpul, M-LOK QD Sling Mount (MAG606), Technical Specifications, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Length: 1.29"”
Wing Tactical, Magpul M-LOK QD Sling Attachment (MAG-606-BLK), Specifications (its own labels: Height, Length, Thickness; source of the figures unstated), a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Length: 1.3"”
Primary Arms, Magpul M-LOK QD Sling Mount (SKU MAG606, MPN MAG606-BLK), Features, a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Length, Max: 1.3 in..”
Midwest Gun Works, Magpul M-LOK QD Sling Mount (MAG606), Specifications, a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Max Length: 1.3 in.”
Scheels, Magpul M-LOK QD Sling Mount (873750-MAG606), Specifications, a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Length: 1.3 in”
Alexander's Store, Magpul M-LOK QD Sling Mount - Forward Attachment (MAG606-BLK), a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Length: 1.3””
Dirty Bird, Magpul M-LOK QD Sling Mount - MPIMAG606, a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Length: 1.3””
AR15Discounts, Magpul M-LOK QD Sling Mount - MPIMAG606 (the same listing as Dirty Bird's), a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Photo 1.321 in ± 0.01 in used
US D746,404 S (Magpul, 'Firearm quick detach mount for a sling'), FIG. 3 front elevation (the outer face), 300 dpi, harvested
Scale: frame from the reviewed holes rear, front (1186.6 px/in, rms 0.000 in over 2 points): the two screw holes' centres, 934.4 px apart, as std.mlok.interval (20 mm). Read by width of the traced outline (tools/trace.py); the plan outline's length at the scale of its own two screw holes, taken as the M-LOK interval apart: 1568 px between the end strokes' middles. The reading is good to 0.003 (the ends' strokes, the holes' centres); the ± also covers how true a design patent's drawing is to the product (the catalog's other Magpul patents read within 0.6% of Magpul's figures, the K2+'s 13% over one way)
The scale every outline is drawn to. Finer than the maker's one decimal and inside it; at it the drawing's width reads the maker's 0.6 (0.601) and its height 0.35, the maker's 0.4 to one decimal, which no scale under 1.31 long gives; and Magpul's own photo of the mount seen square on (gallery _05) has its screws 0.595 of its length apart, the drawing's 0.596. Wing Tactical's 1.29 is the one figure it doesn't meet.
wing and patent-screws differ by 0.031 in beyond what each states it is good to.
Magpul prints one decimal. The drawing at the M-LOK interval's scale reads 1.32, inside it, and is what the outline is drawn to; Wing Tactical's 1.29 is 0.03 short of that and outside the two ± together: kept, not adopted (the header).
Height (how far it stands off the handguard's face)0.354 in ± 0.004 in 9 mmCorroboratedPhoto: US D746,404 S (Magpul, 'Firearm quick detach mount for a sling'), FIG. 5 top plan view (the mount from its side, the mounting face on top), 300 dpi
Published “Height, from surface of Hand Guard: 0.4 in.”
Magpul, M-LOK QD Sling Mount (MAG606), Technical Specifications, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Thickness: 0.3"”
Wing Tactical, Magpul M-LOK QD Sling Attachment (MAG-606-BLK), Specifications (its own labels: Height, Length, Thickness; source of the figures unstated), a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Height: 0.4"”
Primary Arms, Magpul M-LOK QD Sling Mount (SKU MAG606, MPN MAG606-BLK), Features, a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Height, From Surface of Hand Guard: 0.4 in”
Midwest Gun Works, Magpul M-LOK QD Sling Mount (MAG606), Specifications, a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Height (From Surface of Hand Guard): 0.4 in.”
Scheels, Magpul M-LOK QD Sling Mount (873750-MAG606), Specifications, a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Height From Handguard Surface: 0.4 in”
Alexander's Store, Magpul M-LOK QD Sling Mount - Forward Attachment (MAG606-BLK), a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Height: 0.4””
Dirty Bird, Magpul M-LOK QD Sling Mount - MPIMAG606, a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Height: 0.4””
AR15Discounts, Magpul M-LOK QD Sling Mount - MPIMAG606 (the same listing as Dirty Bird's), a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Photo 0.354 in ± 0.004 in used
US D746,404 S (Magpul, 'Firearm quick detach mount for a sling'), FIG. 5 top plan view (the mount from its side, the mounting face on top), 300 dpi, harvested
Scale: scale from magpul-mlok-qd-sling-mount.length = 1.321 in (x-extent 1569 px → 1187.7 px/in). Read by height of the traced outline (tools/trace.py); the patent's side view at the plan's scale: the mounting face to the socket ring's face. FIG. 6, the end view, reads the same (417.5 px against FIG. 5's 418.5)
What the outline is drawn to: the patent's side view at the plan's scale. It is the maker's 0.4 to one decimal, and it sits between that and Wing Tactical's 0.3, inside the rounding of each: 0.35 is where a figure rounds to one or the other. Nothing is stretched to make the 0.4: that would be 13% in one direction on a one-decimal figure.
Width (side to side)0.6 in ± 0.05 in 15.2 mmConflictPublished: Magpul, M-LOK QD Sling Mount (MAG606), Technical Specifications, the maker, read Oct 5, 2026
Published “Width, Max: 0.6 in.” used
Magpul, M-LOK QD Sling Mount (MAG606), Technical Specifications, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Height: 0.63"”
Wing Tactical, Magpul M-LOK QD Sling Attachment (MAG-606-BLK), Specifications (its own labels: Height, Length, Thickness; source of the figures unstated), a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Wing's Height: of its three figures the one that is neither its Length nor its Thickness.
Published “Width: 0.6"”
Primary Arms, Magpul M-LOK QD Sling Mount (SKU MAG606, MPN MAG606-BLK), Features, a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Width, Max: 0.6 in.”
Midwest Gun Works, Magpul M-LOK QD Sling Mount (MAG606), Specifications, a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Max Width: 0.6 in.”
Scheels, Magpul M-LOK QD Sling Mount (873750-MAG606), Specifications, a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Width: 0.6 in”
Alexander's Store, Magpul M-LOK QD Sling Mount - Forward Attachment (MAG606-BLK), a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Width: 0.6””
Dirty Bird, Magpul M-LOK QD Sling Mount - MPIMAG606, a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Published “Width: 0.6””
AR15Discounts, Magpul M-LOK QD Sling Mount - MPIMAG606 (the same listing as Dirty Bird's), a seller, read Oct 5, 2026 the page, harvested Oct 5, 2026
Photo 0.601 in ± 0.005 in
US D746,404 S (Magpul, 'Firearm quick detach mount for a sling'), FIG. 3 front elevation (the outer face), 300 dpi, harvested
Scale: frame from the reviewed holes rear, front (1186.6 px/in, rms 0.000 in over 2 points): the two screw holes' centres, 934.4 px apart, as std.mlok.interval (20 mm). Read by height of the traced outline (tools/trace.py); the plan outline's width (across the socket's ring, its widest) at the scale of its own two screw holes. The ring's own circle, fitted to its stroke, is 711.9 px across: 0.600. ± as the length's
The maker's figure, and the drawing's at the interval's scale to a thousandth (0.601): the second published size that scale has to meet, and does. Wing Tactical's 0.63 (its 'Height') is 5% over both.
wing and patent differ by 0.029 in beyond what each states it is good to.
M-LOK slots its lugs span1CorroboratedPhoto: US D746,404 S (Magpul, 'Firearm quick detach mount for a sling'), FIG. 3 front elevation (the outer face), 300 dpi
Photo 1 count used
US D746,404 S (Magpul, 'Firearm quick detach mount for a sling'), FIG. 3 front elevation (the outer face), 300 dpi, harvested
Scale: the two screw holes' centres, 934.4 px apart, as std.mlok.interval (20 mm). Read by the plan is 1568 px long for 934 px between its screws: 33.6 mm for 20. Two nuts 20 mm apart sit in one 32 mm slot, and a mount a slot's length long covers one
Photo 1 count
Magpul, MAG606 M-LOK QD Sling Mount installation instructions, 2018: the drawing under Step 1, rendered at 1500 dpi, harvested
Scale: none needed: a count. Read by the mount is drawn above a handguard's side with its two T-nuts under it, over one slot: a nut over each end of that slot (the slot 614 px long in the drawing, the nuts 367 px apart)
The patent's plan, which gives the spacing; the maker's own drawing of it going on shows the same one slot.
No page says how many slots it needs in words; Magpul's bullet has it 'Quickly installs onto any M-LOK slot with simple tools', the slot in the singular. Its two screws are the M-LOK interval (20 mm) apart, which is how the patent's scale is set, so both T-nuts go into one 32 mm slot (std.mlok.slot_length), and the mount, 33.6 mm long, covers that slot and no more. Magpul's photo of it installed (feature _04) has it on one slot, the slot behind it ending short of its rear end.
Reach inside the handguard (below the mounting face, tightened)No value yetMissingNo source yet
Not sourced (as for the MVG and the hand stop: Magpul publishes no T-nut figure). The M-LOK tips sheet sets the nut by the surface's thickness ('the T-Nut "gap" must be slightly greater than the thickness of the mounting surface'), not by a figure.
Rear lug's centre ahead of the part's rear end0.267 in ± 0.001 in 6.8 mmProvisionalPhoto: US D746,404 S (Magpul, 'Firearm quick detach mount for a sling'), FIG. 3 front elevation (the outer face), 300 dpi
Photo 0.267 in ± 0.001 in used
US D746,404 S (Magpul, 'Firearm quick detach mount for a sling'), FIG. 3 front elevation (the outer face), 300 dpi, harvested
Scale: frame from the reviewed holes rear, front (1186.6 px/in, rms 0.000 in over 2 points). Read by −x_min of the traced outline (tools/trace.py); the rear screw hole's centre ahead of the plan outline's rear end; the front one is as far from the front end (the plan is symmetric end for end)
The front screw is as far from the front end: the mount is the same end for end, and Magpul's M-LOK FAQ lets an accessory face either way, so which end is the rear is the build's.
The floor of each screw's pocket (where the screw's head bears) above the mounting face0.055 in ± 0.003 in 1.4 mmProvisionalPhoto: US D746,404 S (Magpul, 'Firearm quick detach mount for a sling'), FIG. 2 front, top, left perspective view (an isometric view), 300 dpi
Photo 0.055 in ± 0.003 in used
US D746,404 S (Magpul, 'Firearm quick detach mount for a sling'), FIG. 2 front, top, left perspective view (an isometric view), 300 dpi, harvested
Scale: the elevations' scale (the two screw holes as std.mlok.interval: 1186.6 px/in), carried into FIG. 2 by a parallel projection fitted to the edges the elevations give (1.204 of their scale, each axis foreshortened to 0.983; the model's edges land within 1 px of FIG. 2's strokes). Read by the screw hole's rim (r 130 px) and the pocket floor's outer edge (r 191 px), each slid along the screw's axis until its far arc lies on its stroke in the rear pocket: both at 65 px above the mounting face (64 to 66; about half of each arc shows, the rest is behind the pocket's near rim). The hole's lower edge, at the mounting face, lies on the sliver of a stroke that shows through the hole. ± 3 px
The pocket is a counterbore (FIG. 3: a circle 0.321 across round a 0.219 hole) cut from the outer surface down to this floor, so the wall under a screw's head is this thick. Both of the pocket's circles meet their strokes in FIG. 2 at the same height, 65 px of the elevations' scale; a pixel either way is plainly off.
Screw's head, across0.272 in ± 0.015 in 6.9 mmProvisionalPhoto: Magpul gallery _05, 1200 x 1200: installed beside a light's mount, seen nearly square to its outer face, socket empty, both socket-head screws in
Photo 0.272 in ± 0.015 in used
Magpul gallery _05, 1200 x 1200: installed beside a light's mount, seen nearly square to its outer face, socket empty, both socket-head screws in, harvested
Scale: the two screws' centres in the same view, 155.4 px apart, as std.mlok.interval (20 mm): 197.4 px/in; the socket ring's face (100 px for 0.530 in: 188.8 px/in) is the nearer plane and bounds it the other way. Read by the lit face of the screw at the right, 53 px on its long axis (columns 391 to 443 at luminance over 120); the left one 52 px by eye. 0.268 to 0.281 in between the two scales
Screw's head: its top above the mounting face0.235 in ± 0.03 in 6 mmProvisionalPhoto: Magpul feature _02, 700 x 525: installed, seen from below along the handguard's side, a swivel and sling in the socket; a screw's knurled head stands in its pocket below the ring's face
Photo 0.235 in ± 0.03 in used
Magpul feature _02, 700 x 525: installed, seen from below along the handguard's side, a swivel and sling in the socket; a screw's knurled head stands in its pocket below the ring's face, harvested
Scale: the screw's own face in the same view, as .screw_head_diameter (0.272 in): 62 px on its long axis, 47 on its short (seen about 40 degrees off its axis). Read by the knurled wall showing above the pocket's far rim, 12 px in the picture: 0.053 in as seen, 0.08 in along the screw's axis at that angle; taken as 0.07 above the rim's 0.165 in (the patent's surface at the pocket's far side). ± covers both ways of reading it
Rough, and for the look alone: the head's knurled wall shows above its pocket's rim on the side away from the ring and is sunk on the ring's side, its face well below the ring's (0.354). The drawing's surface is 0.165 in off the mounting face at the pocket's far rim.
Screw's socket: the hex wrench it takes (across flats)0.156 in 4 mmConfirmedPublished: Magpul, MAG606 M-LOK QD Sling Mount installation instructions (2018), Step 1, the maker, read Oct 5, 2026
Published “Secure M-LOK Screws using a 5/32” hex wrench” used
Magpul, MAG606 M-LOK QD Sling Mount installation instructions (2018), Step 1, the maker, read Oct 5, 2026 the page, harvested Oct 5, 2026
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
M-LOK
- Uppers
- Nordic Components 22RB .22 LR upper, 16" (fit unchecked), Panzer Arms AR57 ULT Complete AR-15 Upper Receiver - 5.7x28mm - 12" (fit unchecked), Panzer Arms AR57 Ultra Light Tactical Complete AR-15 Upper Receiver - 5.7x28mm - 16" (fit unchecked)
- Handguards
- Aero Precision AR15 10.3" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 12.7" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 15" Enhanced M-LOK Handguard, Gen 2 (fit unchecked), Aero Precision AR15 15" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 15" S-ONE M-LOK Handguard (fit unchecked), Aero Precision AR15 16.6" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 7.3" R-ONE M-LOK handguard (fit unchecked), Aero Precision AR15 9.3" R-ONE M-LOK handguard (fit unchecked), BCM MCMR-10 (M-LOK® Compatible* Modular Rail) (fit unchecked), BCM MCMR-13 (M-LOK® Compatible* Modular Rail) (fit unchecked), BCM MCMR-15 (M-LOK® Compatible* Modular Rail) (fit unchecked), BCM PMCR (Polymer M-LOK® Compatible Rail)* Carbine Length-BLACK (fit unchecked), BCM PMCR (Polymer M-LOK® Compatible Rail)* Mid Length-BLACK (fit unchecked), Expo Arms Free Float AR-15 Handguard - M-LOK - 15" (fit unchecked), Geissele Automatics 10.5" Super Modular Rail MK16 M-LOK (fit unchecked), Geissele Automatics 13.5" Super Modular Rail MK16 M-LOK (fit unchecked), Geissele Automatics 15" Super Modular Rail MK16 M-LOK (fit unchecked), Magpul MOE SL® Hand Guard, Carbine-Length – AR15/M4 (fit unchecked), Magpul MOE SL® Hand Guard, Mid-Length – AR15/M4 (fit unchecked), Magpul MOE® M-LOK® Hand Guard, Carbine-Length – AR15/M4 (fit unchecked), Magpul MOE® M-LOK® Hand Guard, Mid-Length – AR15/M4 (fit unchecked), MAS Defense 12.62" NERO M-LOK FREE FLOAT (fit unchecked), MAS Defense 15" NERO M-LOK FREE FLOAT (fit unchecked), MAS Defense 9.87" NERO M-LOK FREE FLOAT (fit unchecked), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Carbine) (fit unchecked), Midwest Industries AR-15/M16 Two Piece Drop-In Handguard, M-LOK® (Mid-Length) (fit unchecked), Midwest Industries Combat Rail One Piece Free Float Handguard, M-LOK™ (15") (fit unchecked)
- Adapter plates
- Magpul M-LOK Hand Stop MOE Adapter (fit unchecked)
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Wing Tactical $18.95 Nov 21, 2026, in stock that day
- Midwest Gun Works $18.95 Nov 21, 2026, in stock that day
- Right To Bear $18.95 Nov 21, 2026, in stock that day
- Primary Arms $19.90 Nov 21, 2026, in stock that day
- Mile High Shooting Accessories $19.90 Nov 21, 2026, in stock that day
- Alexander's Store $19.90 Nov 18, 2026, in stock that day
- Sportsman's Warehouse $19.99 Nov 21, 2026, in stock that day
- Scheels $19.99 Oct 5, 2026, in stock that day
- Magpul $20.95 Nov 21, 2026, stock not said
- AR15Discounts $15.95 Nov 21, 2026, out of stock that day
- Dirty Bird Industries $19.90 Nov 21, 2026, out of stock that day
- Rifle Supply $21.99 Nov 21, 2026, out of stock that day