Slide
Taurus TX22 T.O.R.O. Slide
The T.O.R.O.'s optics-ready slide: hard-anodized aluminium, a white-dot front sight and a drift-adjustable square-notch rear sight, three vents ahead of the ejection port, front and rear serrations, and an optic cut for the Shield RMSc footprint under a stepped cover plate held by two screws. Taurus sells it with its 4.6 in threaded barrel as the T.O.R.O. conversion kit for the newer TX22 frames ("only compatible with the newer Taurus TX22 models (1-2TX22141 and 1-2TX22P141)").

- Weight
- 4.53 oz ± 0.6 oz Provisionalworked out: The model's aluminium, the slide's body 2.6508 and the cover plate 0.144 cubic inches (pipeline/blender/taurus_tx22_toro_slide.py's manifests, volumes_in3), times std.density.aluminium (1.568 oz to the cubic inch: Gun Tests, "SLIDE MATERIAL Aluminum"; Taurus's manual, as the discovery read it, "High Grade Aluminum", which names no alloy: 6061's figure, 7075 4% over it): 4.382 oz; and its steel, the sights, the guide rod's head and the plate's screws, 0.0333 cubic inches times std.density.steel: 0.152 oz. The ± is the alloy's 4%, the width's ± 0.06 (6%), and what the slide is cut away inside that no view shows (the breech face, the striker's tunnel, the rails' grooves), which would make it lighter. app/tests/taurus-tx22-toro-slide.test.ts holds the models' volumes to it.
- Lowest price
- Sold in the Taurus TX22 Gen 2 T.O.R.O., 22 LR, 4.6 in, Hard Anodized Black, not by itself
- Colour
- Black (placeholder)
- Drawn as
- modelled
- Maker's page
- shoptaurus.com
In “Taurus TX22 T.O.R.O.”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Length, rear face to front face6.929 in ± 0.049 in 176 mmProvisionalPhoto: Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, the muzzle at the left, 1200 x 1200
Photo 6.929 in ± 0.049 in used
Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, the muzzle at the left, 1200 x 1200, harvested
Scale: frame from the reviewed holes rear_pin, front_pin (158.1 px/in, rms 0.000 in over 2 points). Read by x_max in y [-0.2, 0.35] of the traced outline (tools/trace.py); the front face's near edge, below the top chamfer and clear of the protector (rows over -0.2 to 0.35 in)
From the rear face at the bore's height (the face leans, its foot further back) to the front face. Both ends are the near face's silhouette in the left view.
Height above the bore axis to the slide's top0.514 in ± 0.03 in 13.1 mmProvisionalPhoto: Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, the muzzle at the left, 1200 x 1200
Photo 0.514 in ± 0.03 in used
Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, the muzzle at the left, 1200 x 1200, harvested
Scale: frame from the reviewed holes rear_pin, front_pin (158.1 px/in, rms 0.000 in over 2 points). Read by y_max in x [4.7, 6.2] of the traced outline (tools/trace.py); the nose's top behind the front sight: the far top edge, which a view from even 2 degrees above lifts by some 0.03 in against the near face (the ± takes it)
The slide's lower edge below the bore axis (where it rides on the frame)0.302 in ± 0.03 in 7.7 mmProvisionalWorked out: {taurus-tx22-frame.bore_axis_y} - {taurus-tx22-frame.seam_y}
Worked out 0.302 in ± 0.03 in used
{taurus-tx22-frame.bore_axis_y} - {taurus-tx22-frame.seam_y}, harvested
Photo 0.268 in ± 0.02 in
Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, the muzzle at the left, 1200 x 1200, harvested
Scale: the pin frame (the two cross pins' ends at 735.0, 372.0 and 520.8, 367.0: 158.8 px/in on the near face), shifted to the slide's frame by taurus-tx22-frame.slide_rear_x and bore_axis_y. Read by the start of the dark line under the slide at x 0.5 to 6.5 (rows 337 to 343 against the protector's middle at row 298.5): the shadowed lower edge, not the frame's top
The seat is the frame's: the slide's lower edge lies on the frame's top where the frame's owner reads it in all three views (0.165, 0.162, 0.171 over the rear pin), so the two parts touch there and no slit shows. The dark line's top is the slide's lower edge in shadow, a chamfer's height above where it meets the frame.
The seat on the frame: the frame states where the slide's lower edge is (taurus-tx22-frame.seam_y, the frame's top along its side faces), and the slide carries the same figure as its own lower edge under its own origin. The left view's dark line at the seam begins a few pixels higher (0.268 below the axis): it is the slide's shadowed lower edge over the frame's lit top, which the frame's owner reads as the seam in all three views.
Width (across its sides)0.93 in ± 0.06 in 23.6 mmProvisionalPhoto: Sportsman's Warehouse 1883977-8: the T.O.R.O. from its right front and above, 1200 x 1200
Photo 0.93 in ± 0.06 in used
Sportsman's Warehouse 1883977-8: the T.O.R.O. from its right front and above, 1200 x 1200, harvested
Scale: the thread protector's front face (its rim an ellipse 90 px across and 145 px high: across, its 0.59 in silhouette, taurus-tx22-thread-protector.od). Read by the front face 125 px between its near corner facet and its far silhouette on row 360, at the protector's 90 px for 0.59 in, less 2% for the face standing behind the protector's (0.84 in), and a corner facet each side as deep as it is long (0.045 in on the left view): 0.93. The ± takes the facets' angle and the protector's flats (its silhouette across flats and across corners differ).
No view square across the slide. In the right-front oblique (7c0111a45816), at row 360 the slide's front face runs from a lit band at its near corner (945 to 976) to its far silhouette (1101): 125 px, with the protector's front face 90 px across on the same rows (0.59 in, its silhouette): 0.82 in, 0.84 for the face standing some 0.5 in further from the lens. The corner facets are taken as deep across as their length along on the left view (the front face's near edge at 75.5, the side face's at 82.5: 0.045 in each), adding 0.09. A doubt the ± has to take: row 360 is within the nose's upper bevels at the front (the far silhouette leans from row 315 to 393, nose_bevel_across), so the far edge read there may be on the far bevel, 0.07 inside the full width, and the near band may be the near bevel rather than a corner facet: read so, the width is 0.84 + 2 x 0.07 = 0.98. Below the bevels the protector hides the far edge. Not checked against an independent figure: the frame's owner takes its body's width from this one (taurus-tx22-frame.body_width).
The facet on each of the front face's vertical corners, its length along the slide0.045 in ± 0.015 in 1.1 mmProvisionalPhoto: Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left
Photo 0.045 in ± 0.015 in used
Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, harvested
Scale: the pin frame (158.8 px/in on the near face). Read by the front face's near edge at column 75.5 and the side face's at 82.5 above the protector (rows 235 to 250): 7 px
A lit band at each front corner, between the front face and the side, in both obliques (the right-front one's at row 360: 945 to 976 px). Across, it is taken as deep as it is long (45 degrees).
The nose's upper bevel: its lower edge on the side at the nose's rear face, above the bore axis0.274 in ± 0.02 in 7 mmProvisionalPhoto: Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left
Photo 0.274 in ± 0.02 in used
Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, harvested
Scale: the pin frame (158.8 px/in on the near face), shifted to the slide's frame. Read by the band's lower edge at row 256 at column 470 and 273.5 at columns 85 to 95, against the protector's middle at row 298.5; the line through them at the nose's rear face (4.263)
The nose's upper sides are bevelled the length of the nose, the "TX" on the bevel: a lit band from the top down to row 256 at the nose's rear and 273 to 274 at its front in the left view (grey 133 to 150 against the side's 60 to 70 under it); the rear block's chamfer is the narrow band (top_chamfer). The bevel's lower edge is read at columns 470 (x 4.39) and 85 to 95 (x 6.80) and carried on in a line to the nose's two ends.
The nose's upper bevel: its lower edge on the side at the front face, above the bore axis0.151 in ± 0.02 in 3.8 mmProvisionalPhoto: Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left
Photo 0.151 in ± 0.02 in used
Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, harvested
Scale: the pin frame (158.8 px/in on the near face), shifted to the slide's frame. Read by the same line at the front face (6.929)
The nose's upper bevel: its lean from upright23° ± 5°ProvisionalPhoto: Sportsman's Warehouse 1883977-8: the T.O.R.O. from its right front and above
Photo 23 deg ± 5 deg used
Sportsman's Warehouse 1883977-8: the T.O.R.O. from its right front and above, harvested
Scale: the thread protector's front face (an ellipse 90 px across and 145 px high for its 0.59 in silhouette). Read by the far silhouette's lean (column 1083 at row 315 to 1113 at 393) less the front sight's vertical edges' (0.10 px a px), across and up at the protector's two scales: 0.42, atan 23 degrees
In the right-front oblique the slide's far silhouette below its front top corner (rows 315 to 393, the bevel's height at the front) leans 0.36 px across for each px down where the front sight's vertical edges lean 0.10; the difference at the scales the protector's front face gives across (152.5 px/in) and up (246) is 0.42 in across for each inch down: 23 degrees from upright. The front top edge between the two bevels then reads 0.69 (105 px), against 0.65 from this slope.
The chamfer along each top edge, its height on the side0.07 in ± 0.03 in 1.8 mmProvisionalPhoto: Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, the muzzle at the left, 1200 x 1200
Photo 0.07 in ± 0.03 in used
Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, the muzzle at the left, 1200 x 1200, harvested
Scale: the pin frame (the two cross pins' ends at 735.0, 372.0 and 520.8, 367.0: 158.8 px/in on the near face), shifted to the slide's frame by taurus-tx22-frame.slide_rear_x and bore_axis_y. Read by the lit band under the top edge over the rear block (rows 217 to 233, 0.10 in), less the far top edge's lift against the near face for a view a degree or two above (0.03)
In the left view the lit band under the top runs from row 217 to 233 over the rear block (16 px), less the far top edge's lift (0.03 in): 0.07. Across, it is taken as deep as it is high (45 degrees: no end view).
The nose's slanted rear face, just under its top4.263 in ± 0.031 in 108.3 mmProvisionalPhoto: Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, the muzzle at the left, 1200 x 1200
Photo 4.263 in ± 0.031 in used
Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, the muzzle at the left, 1200 x 1200, harvested
Scale: frame from the reviewed holes rear_pin, front_pin (158.1 px/in, rms 0.000 in over 2 points). Read by x_min in x [3.8, 5.0] in y [0.38, 0.47] of the traced outline (tools/trace.py); the nose's slanted rear face just under its top
The rear block's front face, just under its top3.02 in ± 0.023 in 76.7 mmProvisionalPhoto: Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, the muzzle at the left, 1200 x 1200
Photo 3.02 in ± 0.023 in used
Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, the muzzle at the left, 1200 x 1200, harvested
Scale: frame from the reviewed holes rear_pin, front_pin (158.1 px/in, rms 0.000 in over 2 points). Read by x_max in x [2.3, 3.5] in y [0.38, 0.47] of the traced outline (tools/trace.py); the rear block's front face just under its top
The left wall's top in the open middle section, above the bore axis0.004 in ± 0.02 in 0.1 mmProvisionalPhoto: Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, the muzzle at the left, 1200 x 1200
Photo 0.004 in ± 0.02 in used
Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, the muzzle at the left, 1200 x 1200, harvested
Scale: frame from the reviewed holes rear_pin, front_pin (158.1 px/in, rms 0.000 in over 2 points). Read by y_max in x [3.3, 3.9] of the traced outline (tools/trace.py); the left wall's lit rim in the open middle section, under the chamber block
The ejection port's rim in the right wall, below the bore axis0.09 in ± 0.025 in 2.3 mmProvisionalPhoto: Sportsman's Warehouse 1883977-1: the T.O.R.O. from its right, the muzzle at the right
Photo 0.09 in ± 0.025 in used
Sportsman's Warehouse 1883977-1: the T.O.R.O. from its right, the muzzle at the right, harvested
Scale: the pin frame (rear 452.5, 382.5; front 664.5, 374.5: 157.2 px/in). Read by the port's rim at rows 322 to 323 between x 510 and 628 against the protector's middle carried back along the slide's lower edge (row 297.5 at the muzzle, 309 at x 580: the photo is rolled 1.1 degrees): 0.09 below
The right wall cut down between the rear block and the nose, lower than the left wall: its lit rim at row 322 to 323 in the right view.
Where the barrel's breech face stands, ahead of the slide's rear face2.796 in ± 0.06 in 71 mmProvisionalWorked out: {taurus-tx22-frame.rear_x} + {taurus-tx22-frame.pistol_overall_length} - {taurus-tx22-frame.slide_rear_x} - {taurus-tx22-thread-protector.front_wall} - {taurus-tx22-barrel-46.stated_length}
Worked out 2.796 in ± 0.06 in used
{taurus-tx22-frame.rear_x} + {taurus-tx22-frame.pistol_overall_length} - {taurus-tx22-frame.slide_rear_x} - {taurus-tx22-thread-protector.front_wall} - {taurus-tx22-barrel-46.stated_length}, harvested
The breech face isn't seen: the barrel's chamber block runs back under the rear block. Worked out from the barrel's published length, its muzzle face standing behind the protector's front wall, and the protector's front face where the pistol's published overall length puts it (the frame's rearmost point plus 7.60). The rear block's front face (rear_block_front_x) stands 0.1 to 0.2 ahead of it: the block's rear end goes into the slide's breech.
The top vent's front end (its rounded end's tip)6.21 in ± 0.05 in 157.7 mmProvisionalPhoto: Sportsman's Warehouse 1883977-7: the T.O.R.O. from its left front and above
Photo 6.21 in ± 0.05 in used
Sportsman's Warehouse 1883977-7: the T.O.R.O. from its left front and above, harvested
Scale: the front sight's rear end and the nose's rear step, both read on the left view (6.295, 4.317). Read by the vent's front end at 235 px on the line from the sight's rear end (205) to the step (945), linearly
On the left-front oblique, along the nose's top between the front sight's rear end (6.295 on the left view) and the nose's rear step (4.317): the vent's ends at 235 and 878 px of the line from 205 to 945, taken linearly (perspective along 2 in of the top: a percent).
The top vent's rear end4.5 in ± 0.05 in 114.3 mmProvisionalPhoto: Sportsman's Warehouse 1883977-7
Photo 4.5 in ± 0.05 in used
Sportsman's Warehouse 1883977-7, harvested
Scale: the front sight's rear end and the nose's rear step, both read on the left view (6.295, 4.317). Read by the vent's rear end at 878 px on the line from 205 to 945, linearly
The top vent's width across0.38 in ± 0.06 in 9.7 mmProvisionalPhoto: Sportsman's Warehouse 1883977-7
Photo 0.38 in ± 0.06 in used
Sportsman's Warehouse 1883977-7, harvested
Scale: the top's own width (.width less two .top_chamfer). Read by the vent's dark opening 20 px of the top's 42 px band, square across the top at the vent's middle
Some 0.48 of the top's band between its near edge and its far silhouette at the vent's middle in the left-front oblique (20 px of 42): of the top flat inside the two chamfers (width less two chamfers).
How far the side vents reach across from each side0.3 in ± 0.1 in 7.6 mmProvisionalWorked out: An assumption for the drawing, not a reading: each side vent goes through its wall into the room round the barrel; the barrel shows in it in both side views.
Worked out 0.3 in ± 0.1 in used
An assumption for the drawing, not a reading: each side vent goes through its wall into the room round the barrel; the barrel shows in it in both side views., harvested
They open into the barrel's bore through the side walls: the barrel shows through both.
The side walls' thickness in the open middle section and under the nose0.09 in ± 0.03 in 2.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: the walls round the chamber block in the open middle section (the block fills the channel between them in the right-front oblique, 7c0111a45816).
Worked out 0.09 in ± 0.03 in used
An assumption for the drawing, not a reading: the walls round the chamber block in the open middle section (the block fills the channel between them in the right-front oblique, 7c0111a45816)., harvested
Room round the barrel in the nose, on its radius0.012 in ± 0.01 in 0.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: so that the barrel and the slide's bore share nothing. Not a fit.
Worked out 0.012 in ± 0.01 in used
An assumption for the drawing, not a reading: so that the barrel and the slide's bore share nothing. Not a fit., harvested
The channel up into the rear block's underside, from its lower edge0.22 in ± 0.08 in 5.6 mmProvisionalWorked out: An assumption for the drawing, not a reading: the slide rides on the frame's rails, whose tabs stand up above the frame's top inside the slide (Taurus shop's photo of the kit, 98a3a34d1d2d: three tabs, the tallest some 0.2 in over the frame's top); the slide's underside is open between its walls to take them.
Worked out 0.22 in ± 0.08 in used
An assumption for the drawing, not a reading: the slide rides on the frame's rails, whose tabs stand up above the frame's top inside the slide (Taurus shop's photo of the kit, 98a3a34d1d2d: three tabs, the tallest some 0.2 in over the frame's top); the slide's underside is open between its walls to take them., harvested
The rear block's solid rear end, ahead of its rear face, before the underside channel0.12 in ± 0.05 in 3 mmProvisionalWorked out: An assumption for the drawing, not a reading: the rear face is whole in both side views and the kit's photo.
Worked out 0.12 in ± 0.05 in used
An assumption for the drawing, not a reading: the rear face is whole in both side views and the kit's photo., harvested
The serrations' depth into the side0.035 in ± 0.015 in 0.9 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view shows a groove where it meets an edge square on.
Worked out 0.035 in ± 0.015 in used
An assumption for the drawing, not a reading: no view shows a groove where it meets an edge square on., harvested
Front serrations: grooves each side5ProvisionalPhoto: Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, the muzzle at the left, 1200 x 1200
Photo 5 count used
Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, the muzzle at the left, 1200 x 1200, harvested
Scale: the pin frame (the two cross pins' ends at 735.0, 372.0 and 520.8, 367.0: 158.8 px/in on the near face), shifted to the slide's frame by taurus-tx22-frame.slide_rear_x and bore_axis_y. Read by counted on row 285 (five pairs of dark walls) and in both obliques
Rear serrations: grooves each side7ProvisionalPhoto: Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, the muzzle at the left, 1200 x 1200
Photo 7 count used
Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, the muzzle at the left, 1200 x 1200, harvested
Scale: the pin frame (the two cross pins' ends at 735.0, 372.0 and 520.8, 367.0: 158.8 px/in on the near face), shifted to the slide's frame by taurus-tx22-frame.slide_rear_x and bore_axis_y. Read by counted on row 300 (seven dark rear walls, 918 to 1116 px, 33 px apart) and in both obliques
The cover plate's sides, inside the slide's sides0 in ± 0.03 in 0 mmProvisionalWorked out: An assumption for the drawing, not a reading: the plate as wide as the slide at the cut, its sides in the slide's chamfers.
Worked out 0 in ± 0.03 in used
An assumption for the drawing, not a reading: the plate as wide as the slide at the cut, its sides in the slide's chamfers., harvested
The cut is open at both sides: the plate's side faces show in both side views, from the seam at the cut's floor up to its ramps' facets (ramp1_bevel_front and the rest). No view from the front or behind is on file; the left-front oblique (d4f6e257c86f) says the sides lean with the slide's chamfer rather than stand upright: in it, scaled across by the plate's two screws (screw_spacing) and along by the plate's length, the band of the plate's side at its front end shows 25 px from its top edge to the seam, where an upright side would show 13 to 15 and one in the slide's 45-degree chamfer 17 to 19 (neither exactly; the chamfer's nearer), and it is lit like no upright face of the slide in the right-front oblique (7c0111a45816: the band 156, the slide's flank under it 132). Drawn in the slide's chamfer (2026-11-06: drawn upright for an afternoon, which put the plate's corners out past the chamfer at both walls).
The cover plate's screw heads, across0.17 in ± 0.03 in 4.3 mmProvisionalPhoto: Sportsman's Warehouse 1883977-7
Photo 0.17 in ± 0.03 in used
Sportsman's Warehouse 1883977-7, harvested
Scale: the bumps the heads make on the left view's plate top, 20 px for the front screw (.cover_screws feature). Read by the front screw's bump 20 px long on the left view's plate top at 158.8 px/in, less its shadow; the oblique's two Torx heads about a quarter of the plate's width
The front sight's width across0.14 in ± 0.03 in 3.6 mmProvisionalWorked out: An assumption for the drawing, not a reading: the post in both obliques is narrow against the slide's top, its white dot most of its width.
Worked out 0.14 in ± 0.03 in used
An assumption for the drawing, not a reading: the post in both obliques is narrow against the slide's top, its white dot most of its width., harvested
The rear sight's width across0.6 in ± 0.08 in 15.2 mmProvisionalWorked out: An assumption for the drawing, not a reading: the right-front oblique (7c0111a45816) shows the sight across most of the slide's top flat, its notch in its middle.
Worked out 0.6 in ± 0.08 in used
An assumption for the drawing, not a reading: the right-front oblique (7c0111a45816) shows the sight across most of the slide's top flat, its notch in its middle., harvested
The rear sight's square notch, across0.12 in ± 0.03 in 3 mmProvisionalWorked out: An assumption for the drawing, not a reading: "serrated, drift-adjustable square-notch rear sight" (American Rifleman); the notch about a fifth of the sight's width in the right-front oblique.
Worked out 0.12 in ± 0.03 in used
An assumption for the drawing, not a reading: "serrated, drift-adjustable square-notch rear sight" (American Rifleman); the notch about a fifth of the sight's width in the right-front oblique., harvested
The front lug's bottom below the bore axis0.826 in ± 0.03 in 21 mmProvisionalPhoto: Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, the muzzle at the left, 1200 x 1200
Photo 0.826 in ± 0.03 in used
Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, the muzzle at the left, 1200 x 1200, harvested
Scale: the pin frame (the two cross pins' ends at 735.0, 372.0 and 520.8, 367.0: 158.8 px/in on the near face), shifted to the slide's frame by taurus-tx22-frame.slide_rear_x and bore_axis_y. Read by the lug's smooth face ahead of the frame's textured dust cover (x 76 to 88) to row 428 (profiles.side.features.front_lug, through the pin frame)
The lug under the nose that holds the recoil spring's front end (Taurus shop's photo of the kit): in the left view its face shows ahead of the frame's dust cover down to row 428, in the right view to 430.
The front lug's length along the slide0.27 in ± 0.05 in 6.9 mmProvisionalPhoto: Taurus shop, the conversion kit: the slide with its barrel and spring lifted off a frame, from the left, 1200 x 984
Photo 0.27 in ± 0.05 in used
Taurus shop, the conversion kit: the slide with its barrel and spring lifted off a frame, from the left, 1200 x 984, harvested
Scale: the slide's own side height in the same photo (.height + .bottom_below_axis, 98 px at its rear block). Read by its bottom 37 px long against the slide's side height of 98 px at the rear block (0.82 in: .height + .bottom_below_axis)
Only its front 0.08 in shows ahead of the frame's dust cover on the pistol: the rest stands inside the dust cover's front.
The front lug's width across0.532 in ± 0.08 in 13.5 mmProvisionalWorked out: 2 * ({.lug_bottom} - {.guide_rod_y})
Worked out 0.532 in ± 0.08 in used
2 * ({.lug_bottom} - {.guide_rod_y}), harvested
The lug's lower end is a half round about the guide rod's axis: in the close right-front view (e546d93843c1) its front face's outline runs down its side and round under the rod's head into its bottom. As wide, then, as that round is across: twice the lug's bottom under the rod's axis.
The recoil spring's guide rod head, its centre below the bore axis0.56 in ± 0.05 in 14.2 mmProvisionalPhoto: Sportsman's Warehouse 1883977-8: the T.O.R.O. from its right front and above, 1200 x 1200
Photo 0.56 in ± 0.05 in used
Sportsman's Warehouse 1883977-8: the T.O.R.O. from its right front and above, 1200 x 1200, harvested
Scale: the thread protector's front face (its rim an ellipse 90 px across and 145 px high: across, its 0.59 in silhouette, taurus-tx22-thread-protector.od). Read by the head's centre (1045, 690) 208 px under the protector's front face's centre (1143, 482), at the vertical scale the protector's face gives (145 px for 0.59 in: 246 px/in), less the protector's face standing ahead of the lug's face (it reads lower by its distance along the bore times the view's slope): about 0.56
The guide rod's head, across0.3 in ± 0.05 in 7.6 mmProvisionalPhoto: Sportsman's Warehouse 1883977-8: the T.O.R.O. from its right front and above, 1200 x 1200
Photo 0.3 in ± 0.05 in used
Sportsman's Warehouse 1883977-8: the T.O.R.O. from its right front and above, 1200 x 1200, harvested
Scale: the thread protector's front face (its rim an ellipse 90 px across and 145 px high: across, its 0.59 in silhouette, taurus-tx22-thread-protector.od). Read by the head's face 45 px across on row 690 at the protector's 90 px for 0.59 in
The optic cut's rear wall0.841 in ± 0.02 in 21.4 mmProvisionalPhoto: Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left
Photo 0.841 in ± 0.02 in used
Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, harvested
Scale: the pin frame (158.8 px/in on the near face), shifted to the slide's frame. Read by the plate's rear end at column 1037 (profiles.side.features.cover_plate)
The cut runs across the slide's top, open at both sides: the cover plate's side face shows in it in both side views, from its front wall to its rear wall.
The optic cut's front wall2.504 in ± 0.02 in 63.6 mmProvisionalPhoto: Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left
Photo 2.504 in ± 0.02 in used
Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, harvested
Scale: the pin frame (158.8 px/in on the near face), shifted to the slide's frame. Read by the plate's front end at column 774 (profiles.side.features.cover_plate)
The optic cut's floor above the bore axis0.44 in ± 0.02 in 11.2 mmProvisionalPhoto: Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left
Photo 0.44 in ± 0.02 in used
Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, harvested
Scale: the pin frame (158.8 px/in on the near face), shifted to the slide's frame. Read by the plate's lower edge at row 229 from column 774 to 1037 (profiles.side.features.cover_plate; the darkest row under it, 232, is its shadow)
Where the plate's side face ends below: a dark line along it at rows 228 to 232 in the left view (its lower edge's shadow on the cut's floor), 0.08 to 0.09 under the slide's top.
The plate's first ramp's rear end (the step up to the second)2.084 in ± 0.01 in 52.9 mmCorroboratedPhoto: Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200
Photo 2.084 in ± 0.01 in used
Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200, harvested
Scale: the plate's own ends at columns 552 and 1060, the left view's .cut_rear_x and .cut_front_x: 306.8 px/in along it. Read by the column where the lit wedge begins again at its full depth, 931 (between 928, thin, and 936, deep)
Photo 2.08 in ± 0.015 in
Sportsman's Warehouse 1883977-1: the T.O.R.O. from its right, the muzzle at the right, harvested
Scale: the plate's own ends at columns 153 and 413, the left view's .cut_rear_x and .cut_front_x: 157 px/in along it. Read by the step between columns 345 (thin) and 348 (deep)
The close view's step: the right view's agrees within its pixels.
The first ramp runs from the plate's front end (.cut_front_x) back to here. The left view's outline has the step too (profiles.side.features.cover_plate: 2.1 to 2.081).
The plate's second ramp's rear end (the step up to the third)1.709 in ± 0.01 in 43.4 mmCorroboratedPhoto: Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200
Photo 1.709 in ± 0.01 in used
Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200, harvested
Scale: the plate's own ends at columns 552 and 1060, the left view's .cut_rear_x and .cut_front_x: 306.8 px/in along it. Read by the step at column 816 (between 812, thin, and 820, deep)
Photo 1.717 in ± 0.015 in
Sportsman's Warehouse 1883977-1: the T.O.R.O. from its right, the muzzle at the right, harvested
Scale: the plate's own ends at columns 153 and 413, the left view's .cut_rear_x and .cut_front_x: 157 px/in along it. Read by the step between columns 288 (thin) and 291 (deep)
The close view's step: the right view's agrees within its pixels.
The left view's outline has the step at 1.72 to 1.701.
The plate's third ramp's rear end (where the flat under the screws' pad begins)1.5 in ± 0.01 in 38.1 mmCorroboratedPhoto: Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200
Photo 1.5 in ± 0.01 in used
Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200, harvested
Scale: the plate's own ends at columns 552 and 1060, the left view's .cut_rear_x and .cut_front_x: 306.8 px/in along it. Read by the ramp's rear end at column 752, its step face lit (the flat behind it shows no lit band, 704 to 748)
Photo 1.507 in ± 0.015 in
Sportsman's Warehouse 1883977-1: the T.O.R.O. from its right, the muzzle at the right, harvested
Scale: the plate's own ends at columns 153 and 413, the left view's .cut_rear_x and .cut_front_x: 157 px/in along it. Read by the ramp's rear end between columns 255 (the flat, grey to its top) and 258 (the wedge)
The close view's step: the right view's agrees within its pixels.
Behind it the plate's top is a flat with no bevel, then the screws' round pad (the left view's bump, 1.379 to 1.17), whose side shows dark and curved in both right views.
The plate's fourth ramp's front end (behind the screws' pad)1.168 in ± 0.01 in 29.7 mmCorroboratedPhoto: Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200
Photo 1.168 in ± 0.01 in used
Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200, harvested
Scale: the plate's own ends at columns 552 and 1060, the left view's .cut_rear_x and .cut_front_x: 306.8 px/in along it. Read by where the pad's dark side gives way to the wedge, column 650
Photo 1.166 in ± 0.015 in
Sportsman's Warehouse 1883977-1: the T.O.R.O. from its right, the muzzle at the right, harvested
Scale: the plate's own ends at columns 153 and 413, the left view's .cut_rear_x and .cut_front_x: 157 px/in along it. Read by the wedge's front end, column 203
The close view's step: the right view's agrees within its pixels.
The plate's fourth ramp's rear end (the step up to the block at the plate's rear)0.946 in ± 0.01 in 24 mmCorroboratedPhoto: Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200
Photo 0.946 in ± 0.01 in used
Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200, harvested
Scale: the plate's own ends at columns 552 and 1060, the left view's .cut_rear_x and .cut_front_x: 306.8 px/in along it. Read by the step between columns 580 (the block, no lit band) and 584 (the wedge at its deepest)
Photo 0.951 in ± 0.012 in
Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, harvested
Scale: the pin frame (158.8 px/in on the near face), shifted to the slide's frame. Read by the step in the plate's traced top, 0.961 to 0.942 (profiles.side.features.cover_plate), its middle
The close view's step; the left view's traced top has it too, within its pixel.
The right view (e50c634c3e4d) puts the step at column 172.5, 0.972, where the rear block's shade runs into the wedge: not taken.
The first ramp's side bevel at its front end, its height on the side0.016 in ± 0.005 in 0.4 mmCorroboratedPhoto: Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200
Photo 0.016 in ± 0.005 in used
Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200, harvested
Scale: 306.8 px/in, the plate's own length (its ends at columns 552 and 1060). Read by the lit band under the plate's top (grey 185 and over), its top and lower edge fitted along the ramp over 98 columns (rms 1.2 px) and read at its front end
Photo 0.014 in ± 0.008 in
Sportsman's Warehouse 1883977-1: the T.O.R.O. from its right, the muzzle at the right, harvested
Scale: 157 px/in, the plate's own length (its ends at columns 153 and 413). Read by the same over 51 columns (rms 0.7 px)
The close view's fit: twice the right view's pixels, and the two agree.
The first ramp's side bevel at its rear end, its height on the side0.053 in ± 0.005 in 1.3 mmCorroboratedPhoto: Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200
Photo 0.053 in ± 0.005 in used
Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200, harvested
Scale: 306.8 px/in, the plate's own length (its ends at columns 552 and 1060). Read by the lit band's fit (ramp1_bevel_front's) read at the ramp's rear end
Photo 0.047 in ± 0.008 in
Sportsman's Warehouse 1883977-1: the T.O.R.O. from its right, the muzzle at the right, harvested
Scale: 157 px/in, the plate's own length (its ends at columns 153 and 413). Read by the same at the ramp's rear end
The close view's fit: twice the right view's pixels, and the two agree.
The second ramp's side bevel at its front end, its height on the side0.024 in ± 0.005 in 0.6 mmCorroboratedPhoto: Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200
Photo 0.024 in ± 0.005 in used
Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200, harvested
Scale: 306.8 px/in, the plate's own length (its ends at columns 552 and 1060). Read by the lit band's top and lower edge fitted along the ramp over 88 columns (rms 0.35 px), read at its front end
Photo 0.021 in ± 0.008 in
Sportsman's Warehouse 1883977-1: the T.O.R.O. from its right, the muzzle at the right, harvested
Scale: 157 px/in, the plate's own length (its ends at columns 153 and 413). Read by the same over 44 columns (rms 0.3 px)
The close view's fit: twice the right view's pixels, and the two agree.
The second ramp's side bevel at its rear end, its height on the side0.057 in ± 0.005 in 1.4 mmCorroboratedPhoto: Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200
Photo 0.057 in ± 0.005 in used
Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200, harvested
Scale: 306.8 px/in, the plate's own length (its ends at columns 552 and 1060). Read by the lit band's fit read at the ramp's rear end
Photo 0.057 in ± 0.008 in
Sportsman's Warehouse 1883977-1: the T.O.R.O. from its right, the muzzle at the right, harvested
Scale: 157 px/in, the plate's own length (its ends at columns 153 and 413). Read by the same at the ramp's rear end
The close view's fit: twice the right view's pixels, and the two agree.
The third ramp's side bevel at its front end, its height on the side0.027 in ± 0.005 in 0.7 mmCorroboratedPhoto: Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200
Photo 0.027 in ± 0.005 in used
Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200, harvested
Scale: 306.8 px/in, the plate's own length (its ends at columns 552 and 1060). Read by the lit band's top and lower edge fitted along the ramp over 49 columns (rms 0.4 px), read at its front end
Photo 0.025 in ± 0.008 in
Sportsman's Warehouse 1883977-1: the T.O.R.O. from its right, the muzzle at the right, harvested
Scale: 157 px/in, the plate's own length (its ends at columns 153 and 413). Read by the same over 25 columns (rms 0.5 px)
The close view's fit: twice the right view's pixels, and the two agree.
The third ramp's side bevel at its rear end, its height on the side0.048 in ± 0.005 in 1.2 mmCorroboratedPhoto: Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200
Photo 0.048 in ± 0.005 in used
Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200, harvested
Scale: 306.8 px/in, the plate's own length (its ends at columns 552 and 1060). Read by the lit band's fit read at the ramp's rear end
Photo 0.049 in ± 0.008 in
Sportsman's Warehouse 1883977-1: the T.O.R.O. from its right, the muzzle at the right, harvested
Scale: 157 px/in, the plate's own length (its ends at columns 153 and 413). Read by the same at the ramp's rear end
The close view's fit: twice the right view's pixels, and the two agree.
The fourth ramp's side bevel at its front end, its height on the side0.046 in ± 0.005 in 1.2 mmProvisionalPhoto: Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200
Photo 0.046 in ± 0.005 in used
Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200, harvested
Scale: 306.8 px/in, the plate's own length (its ends at columns 552 and 1060). Read by the lit band's top and lower edge fitted along the ramp over 51 columns (rms 0.4 px), read at its front end
Read on the close view alone: in the right view the pad's dark side runs into this ramp's wedge, and the fit there leaves 2.8 px (0.058 at its front, 0.050 at its rear).
The fourth ramp's side bevel at its rear end, its height on the side0.065 in ± 0.005 in 1.7 mmProvisionalPhoto: Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200
Photo 0.065 in ± 0.005 in used
Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200, harvested
Scale: 306.8 px/in, the plate's own length (its ends at columns 552 and 1060). Read by the lit band's fit read at the ramp's rear end
The close view alone (ramp4_bevel_front's note).
The break along the cut's floor where it meets each side face (the seam's lit line, under the plate's own break)0.005 in ± 0.003 in 0.1 mmCorroboratedPhoto: Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200
Photo 0.005 in ± 0.003 in used
Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200, harvested
Scale: 306.8 px/in, the plate's own length (its ends at columns 552 and 1060). Read by the lighter row or two under the dark run at the plate's foot (grey 185 and over against the side's 150 to 160), columns 752 to 1050
Photo 0.006 in ± 0.006 in
Sportsman's Warehouse 1883977-1: the T.O.R.O. from its right, the muzzle at the right, harvested
Scale: 157 px/in, the plate's own length (its ends at columns 153 and 413). Read by the one row under the dark one, 170 to 176 against the side's 150 (columns 291 to 345)
The close view: twice the right view's pixels, and the two agree.
Under the seam's dark line both right views have a line a little lighter than the side round it, a pixel or two: the floor's edge, broken and turned up to the light. Drawn between the cut's two walls and stopping just short of each (plate_edge_break is the dark half).
The break along the plate's lower side edges and its ends' side edges (the seam's dark line)0.006 in ± 0.003 in 0.2 mmProvisionalPhoto: Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200
Photo 0.0065 in ± 0.003 in used
Sportsman's Warehouse 1883977-6: close on the slide's rear top from its right, the muzzle at the right, 1200 x 1200, harvested
Scale: 306.8 px/in, the plate's own length (its ends at columns 552 and 1060). Read by the dark run at the plate's foot (under half way from the side's grey to the darkest row), 2 px in the median of 150 columns
The plate's foot shows as a dark line along the whole plate in both right views, and its two ends as dark lines from the floor to the top: its edges broken where they meet the slide. Drawn as a 45-degree break of this height on the plate (a face turned down and out, which the light leaves dark); the slide's own edge under it is broken too (floor_edge_break), the lit line under the dark one. Two pixels in the right view (e50c634c3e4d, 0.013) are its blur at half the close view's scale.
The footprint's two screws, along the slide1.278 in ± 0.03 in 32.5 mmProvisionalPhoto: Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left
Photo 1.278 in ± 0.03 in used
Sportsman's Warehouse 1883977-2: the T.O.R.O. from its left, harvested
Scale: the pin frame (158.8 px/in on the near face), shifted to the slide's frame. Read by the near screw's head's bump on the plate's top, columns 958 to 978 (profiles.side.features.cover_screws, the first box)
The two screws stand side by side across the plate, not one behind the other: in the left-front oblique the far one's head is offset from the near one's purely across the plate (its centre 57 px along the plate's front edge's direction and none along the slide), so in the left view they are one bump on the plate's top. The other bump there, further back, is the plate's own raised rear block.
The footprint's two screws, apart across the slide0.42 in ± 0.08 in 10.7 mmProvisionalPhoto: Sportsman's Warehouse 1883977-7: the T.O.R.O. from its left front and above
Photo 0.42 in ± 0.08 in used
Sportsman's Warehouse 1883977-7: the T.O.R.O. from its left front and above, harvested
Scale: the plate's top across, its front edge from its near corner (870, 290) to its far corner (780, 233): 106.5 px for the top flat inside the chamfers (.width less two .top_chamfer, 0.79). Read by the two Torx heads' centres (998, 228) and (950, 197): 57 px apart along the front edge's direction and under a pixel along the slide, 0.537 of the plate's top
The right vent's rear end4.46 in ± 0.04 in 113.3 mmProvisionalPhoto: Sportsman's Warehouse 1883977-1: the T.O.R.O. from its right, the muzzle at the right
Photo 4.46 in ± 0.04 in used
Sportsman's Warehouse 1883977-1: the T.O.R.O. from its right, the muzzle at the right, harvested
Scale: the pin frame (rear 452.5, 382.5; front 664.5, 374.5: 157.2 px/in on the near face), its 0.9 degree roll against the pins' own line taken out, shifted to the slide's frame. Read by the vent's lit rim's rear end at column 721 (profiles.side check spec side-right, its feature right_window)
The right vent is shorter than the left: the ejection port is behind it on that side. Its height is the left vent's (the two rims' top and bottom edges at the same rows by eye, each side's photo).
The right vent's front end5.39 in ± 0.04 in 136.9 mmProvisionalPhoto: Sportsman's Warehouse 1883977-1: the T.O.R.O. from its right, the muzzle at the right
Photo 5.39 in ± 0.04 in used
Sportsman's Warehouse 1883977-1: the T.O.R.O. from its right, the muzzle at the right, harvested
Scale: the pin frame (rear 452.5, 382.5; front 664.5, 374.5: 157.2 px/in on the near face), its 0.9 degree roll against the pins' own line taken out, shifted to the slide's frame. Read by the vent's lit rim's front end at column 868 (the check spec side-right, its feature right_window)
The footprint's screw holes in the cut's floor, across0.1 in ± 0.03 in 2.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: the holes the cover plate's two screws go into (and a red dot's in its place), under the plate's heads; no view shows them.
Worked out 0.1 in ± 0.03 in used
An assumption for the drawing, not a reading: the holes the cover plate's two screws go into (and a red dot's in its place), under the plate's heads; no view shows them., harvested
The front sight's white dot, across0.07 in ± 0.02 in 1.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: the dot on the post's rear face, half the post's width; no photo looks at it.
Worked out 0.07 in ± 0.02 in used
An assumption for the drawing, not a reading: the dot on the post's rear face, half the post's width; no photo looks at it., harvested
The rear sight's notch, its depth0.07 in ± 0.02 in 1.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: the square notch between the sight's two ears in both obliques, about two fifths of the sight's height above the slide.
Worked out 0.07 in ± 0.02 in used
An assumption for the drawing, not a reading: the square notch between the sight's two ears in both obliques, about two fifths of the sight's height above the slide., harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
TX22 slide on its frame
- Frames
- Taurus TX22 Gen 2 frame