Scope
SIG SAUER TANGO-MSR 1-6x24
A 1-6x low-power variable scope (second focal plane, illuminated, MSR BDC6 reticle) on a 30 mm tube. SIG sells it in its one-piece cantilever mount, the ALPHA-MSR, as SOT61000: the scope slides in the mount's rings, which is how its eye relief is set. It does the work of a red dot and a magnifier, and takes the rail space of both. Drawn as photographed: magnification at 1x, the throw lever straight up.

- Weight
- 18.5 oz Confirmedpublished: SIG SAUER, TANGO-MSR LPVO 1-6x24mm SFP product page, SPECIFICATIONS table (read by the user on the page and pasted in chat as a screenshot; not on file), the maker, read Oct 1, 2026
- Lowest price
- Sold in the SIG SAUER TANGO-MSR 1-6x24 in its ALPHA-MSR mount, not by itself
- Colours
- Black, Coyote
- Drawn as
- modelled
In “22RB carbine, scoped”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length (the objective's front face to the eyepiece's rear face)10.4 in 264.2 mmConflictPublished: SIG SAUER, TANGO-MSR LPVO 1-6x24mm SFP product page, SPECIFICATIONS table (read by the user on the page and pasted in chat as a screenshot; not on file), the maker, read Oct 1, 2026
Published “Overall Length 10.4 in” used
SIG SAUER, TANGO-MSR LPVO 1-6x24mm SFP product page, SPECIFICATIONS table (read by the user on the page and pasted in chat as a screenshot; not on file), the maker, read Oct 1, 2026 the page, from the site owner
Published “Maße: 264 x 70 x 80 mm”
German Sport Guns, SOT61000 (Technische Daten), a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
The first of three unlabelled figures.
Published “Length 10.4in”
Sportsman's Warehouse, item 1696951, a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
Published “Length: 11 inches”
Xtreme Guns and Ammo (the coyote model, SOTM61200), a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
The same listing gives a 28 mm objective lens where SIG says 24.
SIG's table; two retailers repeat it (264 mm is 10.39 in). One listing rounds to 11 inches.
sig and xtreme differ by 0.6 in beyond what each states it is good to.
gsg and xtreme differ by 0.606 in beyond what each states it is good to.
sportsmans and xtreme differ by 0.6 in beyond what each states it is good to.
Main tube diameter1.181 in 30 mmConfirmedPublished: SIG SAUER, TANGO-MSR LPVO 1-6x24mm SFP product page, SPECIFICATIONS table (read by the user on the page and pasted in chat as a screenshot; not on file), the maker, read Oct 1, 2026
Published “Maintube Diameter 30mm” used
SIG SAUER, TANGO-MSR LPVO 1-6x24mm SFP product page, SPECIFICATIONS table (read by the user on the page and pasted in chat as a screenshot; not on file), the maker, read Oct 1, 2026 the page, from the site owner
Published “Mittelrohr Durchmesser: 30 mm”
German Sport Guns, SOT61000 (Technische Daten), a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
Published “P/N: SOA20014 30mm X 1.535"”
SIG SAUER, the engraving on the ALPHA-MSR mount's left side, as it reads in German Sport Guns' left-side product photo (a copy on file) and in the user's photos of the mount, the maker, read Oct 1, 2026 the page, harvested Oct 1, 2026
The ring size of the mount it ships in.
SIG's table; a retailer and the ring size engraved on its mount say the same.
Objective end, outside diameter1.181 in 30 mmConfirmedPublished: SIG SAUER, TANGO-MSR LPVO 1-6x24mm SFP product page, SPECIFICATIONS table (read by the user on the page and pasted in chat as a screenshot; not on file), the maker, read Oct 1, 2026
Published “Objective Outer Diameter 30 MM” used
SIG SAUER, TANGO-MSR LPVO 1-6x24mm SFP product page, SPECIFICATIONS table (read by the user on the page and pasted in chat as a screenshot; not on file), the maker, read Oct 1, 2026 the page, from the site owner
Published “Objektiv Durchmesser außen: 30 mm”
German Sport Guns, SOT61000 (Technische Daten), a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
SIG's table; a retailer repeats it.
The same as the main tube: a straight 30 mm tube with no bell. The two read alike in both side photos once the photos' yaw is taken out (the trace's checks).
Objective lens diameter0.945 in 24 mmConfirmedPublished: SIG SAUER, TANGO-MSR LPVO 1-6x24mm SFP product page, SPECIFICATIONS table (read by the user on the page and pasted in chat as a screenshot; not on file), the maker, read Oct 1, 2026
Published “Objective Lens Diameter 24 mm” used
SIG SAUER, TANGO-MSR LPVO 1-6x24mm SFP product page, SPECIFICATIONS table (read by the user on the page and pasted in chat as a screenshot; not on file), the maker, read Oct 1, 2026 the page, from the site owner
Published “Objektiv Durchmesser: 24 mm”
German Sport Guns, SOT61000 (Technische Daten), a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
SIG's table; a retailer repeats it. (One listing of the coyote model says 28 mm: see length.)
Ocular lens diameter (the glass, as it shows in the eyepiece's rear)1.22 in ± 0.06 in 31 mmProvisionalPhoto: German Sport Guns SOT61000_4.jpg, from the rear right
Photo 1.22 in ± 0.06 in used
German Sport Guns SOT61000_4.jpg, from the rear right, harvested
Scale: the eyepiece's own rear rim in the same view, 543 px along its long axis, taken as 1.826 in (twice the traced body's radius there). Read by same-plane ratio on a gridded 2x crop: the glass is 362 px along the same direction, 0.667 of the rim. It sits a little way inside the rim, which shows it a percent or two small
Eye relief at 1x3.93 in 99.8 mmConfirmedPublished: SIG SAUER, TANGO-MSR LPVO 1-6x24mm SFP product page, SPECIFICATIONS table (read by the user on the page and pasted in chat as a screenshot; not on file), the maker, read Oct 1, 2026
Published “Eye Relief Low (IN) 3.93” used
SIG SAUER, TANGO-MSR LPVO 1-6x24mm SFP product page, SPECIFICATIONS table (read by the user on the page and pasted in chat as a screenshot; not on file), the maker, read Oct 1, 2026 the page, from the site owner
Eye relief at 6x3.74 in 95 mmConfirmedPublished: SIG SAUER, TANGO-MSR LPVO 1-6x24mm SFP product page, SPECIFICATIONS table (read by the user on the page and pasted in chat as a screenshot; not on file), the maker, read Oct 1, 2026
Published “Eye Relief High (IN) 3.74” used
SIG SAUER, TANGO-MSR LPVO 1-6x24mm SFP product page, SPECIFICATIONS table (read by the user on the page and pasted in chat as a screenshot; not on file), the maker, read Oct 1, 2026 the page, from the site owner
Objective's front face, ahead of the mount's rear cross bolt7.008 in ± 0.03 in 178 mmCorroboratedPhoto: German Sport Guns SOT61000.jpg, right side, 3000 x 2000
Photo 7.008 in ± 0.03 in used
German Sport Guns SOT61000.jpg, right side, 3000 x 2000, harvested
Scale: scale from sig-tango-msr-1-6x24.tube_od = 1.1811 in, the tube's own width column by column: 276.1 px over columns 1170–1350, 275.5 px over columns 1545–1640, 274.6 px over columns 2025–2060, 273.0 px over columns 2290–2660; a line through them (rms 0.28 px) changes -1.5% from column 1170 to 2660, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1500)/width, the lens's axis taken to meet the image at column 1500; 233.4 px/in there. The axis is the tube's centre line (tilt -0.23°, rms 0.19 px). Lengths then scaled by 1.0125 so that the end faces are sig-tango-msr-1-6x24.length = 10.4 in apart: at the tube's scale they read 10.272 (-1.2%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.160 in over radius 0.591 (rms 0.002), the rear end's rim sags 0.055 in over radius 0.913 (rms 0.005). Read by the max end's face: the silhouette's tip at 7.170 less its rim's arc, 0.162 in of sag at radius 0.591151 (the end is seen from 15.3° off square; arc fitted over 115 rows, rms 0.002) of the traced outline (tools/trace.py); the objective's front face, behind its rim's arc
Photo 7.029 in ± 0.03 in
German Sport Guns SOT61000_2.jpg, left side, 3000 x 2000, harvested
Scale: scale from sig-tango-msr-1-6x24.tube_od = 1.1811 in, the tube's own width column by column: 295.6 px over columns 245–335, 294.0 px over columns 900–965, 292.3 px over columns 1385–1500, 291.4 px over columns 1685–1880; a line through them (rms 0.19 px) changes -1.7% from column 245 to 1880, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1500)/width, the lens's axis taken to meet the image at column 1500; 247.3 px/in there. The axis is the tube's centre line (tilt -0.08°, rms 0.18 px). Lengths then scaled by 1.0062 so that the end faces are sig-tango-msr-1-6x24.length = 10.4 in apart: at the tube's scale they read 10.336 (-0.6%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.099 in over radius 0.588 (rms 0.002), the rear end's rim sags 0.146 in over radius 0.915 (rms 0.002). Read by the max end's face: the silhouette's tip at 7.129 less its rim's arc, 0.100 in of sag at radius 0.587647 (the end is seen from 9.6° off square; arc fitted over 121 rows, rms 0.002) of the traced outline (tools/trace.py); the objective's front face, behind its rim's arc (the left side, mirrored)
The right side is the photo the outline is traced from; the left side, mirrored, agrees within 0.02 in once each photo's perspective on the bolt is taken out.
Where the scope sits in its mount, as SIG assembles it. Both side photos see the scope's ends from an angle, so each end shows the rim of its face as an arc: the face is where the arc ends, not the silhouette's tip. The bolt's own axis is taken behind its head (right side) or nut (left side) by that photo's perspective: 0.03 and 0.04 in, opposite ways, and with that the two sides agree.
Eyepiece's rear face, behind the mount's rear cross bolt3.392 in ± 0.03 in 86.2 mmCorroboratedPhoto: German Sport Guns SOT61000.jpg, right side, 3000 x 2000
Photo 3.392 in ± 0.03 in used
German Sport Guns SOT61000.jpg, right side, 3000 x 2000, harvested
Scale: scale from sig-tango-msr-1-6x24.tube_od = 1.1811 in, the tube's own width column by column: 276.1 px over columns 1170–1350, 275.5 px over columns 1545–1640, 274.6 px over columns 2025–2060, 273.0 px over columns 2290–2660; a line through them (rms 0.28 px) changes -1.5% from column 1170 to 2660, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1500)/width, the lens's axis taken to meet the image at column 1500; 233.4 px/in there. The axis is the tube's centre line (tilt -0.23°, rms 0.19 px). Lengths then scaled by 1.0125 so that the end faces are sig-tango-msr-1-6x24.length = 10.4 in apart: at the tube's scale they read 10.272 (-1.2%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.160 in over radius 0.591 (rms 0.002), the rear end's rim sags 0.055 in over radius 0.913 (rms 0.005). Read by the min end's face: the silhouette's tip at -3.447 less its rim's arc, 0.055 in of sag at radius 0.912807 (the end is seen from 3.5° off square; arc fitted over 121 rows, rms 0.005) of the traced outline (tools/trace.py); the eyepiece's rear face, behind its rim's arc
Photo 3.371 in ± 0.03 in
German Sport Guns SOT61000_2.jpg, left side, 3000 x 2000, harvested
Scale: scale from sig-tango-msr-1-6x24.tube_od = 1.1811 in, the tube's own width column by column: 295.6 px over columns 245–335, 294.0 px over columns 900–965, 292.3 px over columns 1385–1500, 291.4 px over columns 1685–1880; a line through them (rms 0.19 px) changes -1.7% from column 245 to 1880, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1500)/width, the lens's axis taken to meet the image at column 1500; 247.3 px/in there. The axis is the tube's centre line (tilt -0.08°, rms 0.18 px). Lengths then scaled by 1.0062 so that the end faces are sig-tango-msr-1-6x24.length = 10.4 in apart: at the tube's scale they read 10.336 (-0.6%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.099 in over radius 0.588 (rms 0.002), the rear end's rim sags 0.146 in over radius 0.915 (rms 0.002). Read by the min end's face: the silhouette's tip at -3.518 less its rim's arc, 0.147 in of sag at radius 0.914687 (the end is seen from 9.1° off square; arc fitted over 121 rows, rms 0.002) of the traced outline (tools/trace.py); the eyepiece's rear face, behind its rim's arc (the left side, mirrored)
The right side is the photo the outline is traced from; the left side, mirrored, agrees within 0.02 in once each photo's perspective on the bolt is taken out.
The other end, by the same reading. With objective_front_x it adds up to the published length, which set the photos' scale along the scope.
Overall width (across the windage and illumination turrets)2.595 in ± 0.06 in 65.9 mmConflictWorked out: {.windage_reach} + {.illumination_reach}
Published “Maße: 264 x 70 x 80 mm”
German Sport Guns, SOT61000 (Technische Daten), a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
The second of three unlabelled figures.
Worked out 2.595 in ± 0.06 in used
{.windage_reach} + {.illumination_reach}, harvested
Each turret's face placed on the scope's own photos through a fitted camera. The retailer's figure is unlabelled, and 0.16 in more than the scope shows.
gsg and turrets differ by 0.161 in beyond what each states it is good to.
No end-on or top view of this scope exists in anything reachable (two discovery passes), and SIG's table gives no width. The two side turrets don't stand out alike: the windage cap is the elevation cap, 1.165 in out, and the illumination knob is a taller stack, 1.43. A retailer's unlabelled three figures begin with the published length, so the second was taken as the width, and halved for both turrets, until 2026-10-04: it would need the knob 1.59 in out.
Windage turret's flat face, distance from the optical axis1.165 in ± 0.03 in 29.6 mmProvisionalPhoto: German Sport Guns SOT61000_3.jpg, from the front right and above, 3000 x 2000), fa263ec375cf (SOT61000_4.jpg, from the rear right, 3000 x 2000
Photo 1.165 in ± 0.03 in used
German Sport Guns SOT61000_3.jpg, from the front right and above, 3000 x 2000), fa263ec375cf (SOT61000_4.jpg, from the rear right, 3000 x 2000, harvested
Scale: a pinhole camera fitted to each photo. Read by the cap's flat face as a circle about the turret's axis, placed where its edge is strongest whatever the start: 1.160 in (the first photo; 1.14 to 1.20 within 80% of the peak) and 1.170 (the second). Leaving out each of the camera's features in turn moves it between 1.14 and 1.20. The elevation cap's height is one of the camera's inputs, so what is read is this reach over that height: 1.00 ± 0.03
The elevation cap's top is 1.164 in above the axis (elevation_top_above_axis): the same cap on the same ball. Its chamfer's outer edge, its skirt and its seat read as the elevation cap's too (1.09 against 1.085, radius 0.63 against 0.627, 0.765 against 0.782).
Illumination knob's rim, distance from the optical axis1.43 in ± 0.05 in 36.3 mmProvisionalPhoto: SOT61000_6.jpg, from the front left, 3000 x 2000), a8f3e6d2726c (Freedom Gorilla SGSOT61000_1_HR.jpg, from the front left, 2000 x 2000
Photo 1.43 in ± 0.05 in used
SOT61000_6.jpg, from the front left, 3000 x 2000), a8f3e6d2726c (Freedom Gorilla SGSOT61000_1_HR.jpg, from the front left, 2000 x 2000, harvested
Scale: a pinhole camera fitted to each photo. Read by the cap's rounded rim as a circle about the knob's axis: 1.43 in (radius 0.585) and 1.41 (0.580); the logo's ring on the face's floor 1.405 and 1.383 (radius 0.273 and 0.272)
Its face is dished: the floor, with the logo's medallion, is about 0.03 in inside the rim. The two photos share a viewpoint, and in both the logo sits 0.05 to 0.09 in off the modelled axis, which one viewpoint can't assign to the turret station, to the knob's own axis or to the picture's crop: that is the ±.
Windage turret, its cap's flat face diameter0.89 in ± 0.03 in 22.6 mmCorroboratedPhoto: German Sport Guns SOT61000_3.jpg, from the front right and above, 3000 x 2000), fa263ec375cf (SOT61000_4.jpg, from the rear right, 3000 x 2000), a0aec57f834a (the right side, face-on
Photo 0.84 in ± 0.03 in
German Sport Guns SOT61000.jpg, right side: the cap seen face-on, harvested
Scale: the 30 mm tube beside it, 274.8 px: 232.7 px/in in the axis's plane; the face stands about 1.4 in nearer the lens, which is 31 in away (the end faces' arcs), so it shows 4.6% large. Read by the dark flat disc is 202 px wide and 207 px tall on a gridded 3x crop (columns 1768–1970, rows 928–1135); 204 px, less the 4.6%
Photo 0.89 in ± 0.03 in used
German Sport Guns SOT61000_3.jpg, from the front right and above, 3000 x 2000), fa263ec375cf (SOT61000_4.jpg, from the rear right, 3000 x 2000), a0aec57f834a (the right side, face-on, harvested
Scale: a pinhole camera fitted to each photo; the face-on view at the face's own distance (230.8 px/in at the axis's plane, the face 1.165 in nearer a lens 32 to 45 in away). Read by the face's circle in the two obliques, radius 0.460 and 0.440; face-on a free ellipse of 105.6 x 104.4 px, 0.88 to 0.89 in across
Three photos; the first reading had the same face-on view 204 px across where the fitted ellipse is 210.
Windage turret, its ribbed skirt's diameter1.22 in ± 0.04 in 31 mmProvisionalPhoto: German Sport Guns SOT61000.jpg, right side: the cap seen face-on
Photo 1.22 in ± 0.04 in used
German Sport Guns SOT61000.jpg, right side: the cap seen face-on, harvested
Scale: the 30 mm tube beside it: 232.7 px/in in the axis's plane; the skirt's rim stands about 1.1 in nearer the lens, so it shows 3.7% large. Read by the cap's outer circle is 291 px wide and 297 px tall on a gridded 3x crop (columns 1712–2003, rows 880–1177); 294 px, less the 3.7%
The elevation cap, seen from the side, is 1.26 in across: the same skirt.
Illumination knob, its cap's face diameter (the disc with the SIG logo)0.95 in ± 0.03 in 24.1 mmProvisionalPhoto: German Sport Guns SOT61000_2.jpg, left side: the knob seen face-on
Photo 0.95 in ± 0.03 in used
German Sport Guns SOT61000_2.jpg, left side: the knob seen face-on, harvested
Scale: the 30 mm tube beside it, 293.3 px: 248.3 px/in in the axis's plane; the face stands about 1.4 in nearer the lens (31 in away), so it shows 4.6% large. Read by the dark cap is 247 px across on a gridded 3x crop (columns 1030–1277); less the 4.6%
Illumination knob, its knurled ring's diameter1.17 in ± 0.04 in 29.7 mmProvisionalPhoto: German Sport Guns SOT61000_2.jpg, left side: the knob seen face-on
Photo 1.17 in ± 0.04 in used
German Sport Guns SOT61000_2.jpg, left side: the knob seen face-on, harvested
Scale: the 30 mm tube beside it: 248.3 px/in in the axis's plane; the ring stands about 1.1 in nearer the lens, so it shows 3.6% large. Read by the light knurled ring is 307 px wide and 298 px tall on a gridded 3x crop (columns 1000–1307, rows 862–1160); 302 px, less the 3.6%
Illumination knob, the numbered ring's diameter (next to the saddle)1.2 in ± 0.04 in 30.5 mmProvisionalPhoto: Freedom Gorilla SGSOT61000_1_HR.jpg, from the front left, 2000 x 2000
Photo 1.2 in ± 0.04 in used
Freedom Gorilla SGSOT61000_1_HR.jpg, from the front left, 2000 x 2000, harvested
Scale: a pinhole camera fitted to each photo. Read by the glossy numbered ring, from the saddle (0.80 in from the axis) out to illumination_dial_outer: radius 0.60
Illumination knob, the numbered ring's outer end from the optical axis0.95 in ± 0.04 in 24.1 mmProvisionalPhoto: Freedom Gorilla SGSOT61000_1_HR.jpg, from the front left, 2000 x 2000
Photo 0.95 in ± 0.04 in used
Freedom Gorilla SGSOT61000_1_HR.jpg, from the front left, 2000 x 2000, harvested
Scale: a pinhole camera fitted to each photo. Read by the station where the numbered ring ends and the ring with the rectangular detent pockets begins (0.95 to 0.97)
Illumination knob, the ring with the detent pockets, its diameter1.11 in ± 0.04 in 28.2 mmProvisionalPhoto: Freedom Gorilla SGSOT61000_1_HR.jpg, from the front left, 2000 x 2000
Photo 1.11 in ± 0.04 in used
Freedom Gorilla SGSOT61000_1_HR.jpg, from the front left, 2000 x 2000, harvested
Scale: a pinhole camera fitted to each photo. Read by radius 0.555 to 0.56, from 0.97 to 0.99 out to 1.11 to 1.13 in from the axis: the least certain of the stack
Illumination knob, the detent ring's outer end from the optical axis1.11 in ± 0.04 in 28.2 mmProvisionalPhoto: Freedom Gorilla SGSOT61000_1_HR.jpg, from the front left, 2000 x 2000
Photo 1.11 in ± 0.04 in used
Freedom Gorilla SGSOT61000_1_HR.jpg, from the front left, 2000 x 2000, harvested
Scale: a pinhole camera fitted to each photo. Read by where the groove before the knurled ring begins
Illumination knob, the knurled ring's inner end from the optical axis1.17 in ± 0.04 in 29.7 mmProvisionalPhoto: Freedom Gorilla SGSOT61000_1_HR.jpg, from the front left, 2000 x 2000
Photo 1.17 in ± 0.04 in used
Freedom Gorilla SGSOT61000_1_HR.jpg, from the front left, 2000 x 2000, harvested
Scale: a pinhole camera fitted to each photo. Read by where the groove ends
Between it and the detent ring is a groove whose depth isn't read. The knurled ring's diameter is illumination_ring_d (1.17 face-on, 1.17 here).
Illumination knob, the knurled ring's outer end from the optical axis (where the smooth cap begins)1.28 in ± 0.04 in 32.5 mmProvisionalPhoto: Freedom Gorilla SGSOT61000_1_HR.jpg, from the front left, 2000 x 2000
Photo 1.28 in ± 0.04 in used
Freedom Gorilla SGSOT61000_1_HR.jpg, from the front left, 2000 x 2000, harvested
Scale: a pinhole camera fitted to each photo. Read by the cap, smooth with a rounded rim, runs from here to illumination_reach at a radius of 0.58
Turret saddle, the ball's radius (about the turret station on the optical axis)0.985 in ± 0.02 in 25 mmCorroboratedPhoto: SOT61000_4.jpg, from the rear right, 3000 x 2000), a8f3e6d2726c (Freedom Gorilla SGSOT61000_1_HR.jpg, from the front left, 2000 x 2000
Photo 0.985 in ± 0.02 in used
SOT61000_4.jpg, from the rear right, 3000 x 2000), a8f3e6d2726c (Freedom Gorilla SGSOT61000_1_HR.jpg, from the front left, 2000 x 2000, harvested
Scale: a pinhole camera fitted to each photo. Read by a ball about the turret station whose outline lies on the saddle's silhouette between the turrets in both photos
Photo 0.986 in ± 0.02 in
German Sport Guns SOT61000.jpg, right side: the traced body, profiles.body, harvested
Scale: the traced body outline's own (the 30 mm tube). Read by the saddle meets the tube at x 2.377 and 3.958, 0.79 in either side of the station, where a ball about the axis has the tube's radius: the root of 0.79 squared and 0.59 squared. A ball of that radius is 0.762 at x 2.55, where the outline has 0.75
Laid over the saddle itself in two photos; the side outline's ends give the same ball.
A ball with four flats (saddle_flat_*), the tube running through it: between the turrets it stands 0.17 in prouder than the 0.81 in barrel the side outline, turned about the axis, made of it.
Turret saddle, its top flat above the optical axis (the elevation turret's seat)0.78 in ± 0.02 in 19.8 mmProvisionalPhoto: German Sport Guns SOT61000.jpg, right side: profiles.turret and profiles.body
Photo 0.78 in ± 0.02 in used
German Sport Guns SOT61000.jpg, right side: profiles.turret and profiles.body, harvested
Scale: the traced outlines' own (the 30 mm tube). Read by the elevation turret's traced foot, 0.782 in above the axis; the body's outline between x 2.61 and 3.73 reads 0.80 to 0.82, which is the flat seen with the turret's skirt on it
Turret saddle, its bottom flat below the optical axis0.82 in ± 0.03 in 20.8 mmProvisionalPhoto: German Sport Guns SOT61000.jpg, right side: profiles.body
Photo 0.82 in ± 0.03 in used
German Sport Guns SOT61000.jpg, right side: profiles.body, harvested
Scale: the traced body outline's own (the 30 mm tube). Read by the body's outline below the axis between x 2.61 and 3.73
Turret saddle, its right flat from the optical axis (the windage turret's seat)0.77 in ± 0.02 in 19.6 mmProvisionalPhoto: German Sport Guns SOT61000_3.jpg, from the front right and above, 3000 x 2000), fa263ec375cf (SOT61000_4.jpg, from the rear right, 3000 x 2000
Photo 0.77 in ± 0.02 in used
German Sport Guns SOT61000_3.jpg, from the front right and above, 3000 x 2000), fa263ec375cf (SOT61000_4.jpg, from the rear right, 3000 x 2000, harvested
Scale: a pinhole camera fitted to each photo. Read by the outer edge of the dark groove the windage cap sits in, as a circle about its axis: 0.77 and 0.76 in from the optical axis
Turret saddle, its left flat from the optical axis (the illumination knob's seat)0.8 in ± 0.04 in 20.3 mmProvisionalPhoto: Freedom Gorilla SGSOT61000_1_HR.jpg, from the front left, 2000 x 2000
Photo 0.8 in ± 0.04 in used
Freedom Gorilla SGSOT61000_1_HR.jpg, from the front left, 2000 x 2000, harvested
Scale: a pinhole camera fitted to each photo. Read by where the knob's numbered ring begins
Objective, the mouth's inside diameter1.01 in ± 0.02 in 25.7 mmProvisionalPhoto: German Sport Guns SOT61000_3.jpg, from the front right and above, 3000 x 2000), fc28a853047a (SOT61000_6.jpg, from the front left, 3000 x 2000
Photo 1.01 in ± 0.02 in used
German Sport Guns SOT61000_3.jpg, from the front right and above, 3000 x 2000), fc28a853047a (SOT61000_6.jpg, from the front left, 3000 x 2000, harvested
Scale: a pinhole camera fitted to each photo. Read by where the mouth goes black, as a circle on the front face: radius 0.508 and 0.501
A wall of 0.085 in at the mouth, with a small chamfer inside it.
Objective, the front lens behind the front face0.47 in ± 0.1 in 11.9 mmProvisionalPhoto: SOT61000_6.jpg, from the front left, 3000 x 2000
Photo 0.47 in ± 0.1 in used
SOT61000_6.jpg, from the front left, 3000 x 2000, harvested
Scale: a pinhole camera fitted to each photo. Read by a glint that follows a ring inside the bore: 0.45 in deep at its own best radius (0.458), 0.46 at the 24 mm lens's, 0.50 at the bore's; one photo, and the same ring wasn't found in the other
Eyepiece, the rear rim's inside diameter1.48 in ± 0.08 in 37.6 mmProvisionalPhoto: SOT61000_4.jpg, from the rear right, 3000 x 2000
Photo 1.48 in ± 0.08 in used
SOT61000_4.jpg, from the rear right, 3000 x 2000, harvested
Scale: a pinhole camera fitted to each photo. Read by the rim's inner edge falls between circles of radius 0.70 and 0.78 drawn on the rear face: their middle, by eye; one photo
Between the rim's inner edge and the eye lens the wall is black and tapers in.
Eyepiece, the eye lens ahead of the rear face0.3 in ± 0.06 in 7.6 mmProvisionalPhoto: SOT61000_4.jpg, from the rear right, 3000 x 2000
Photo 0.3 in ± 0.06 in used
SOT61000_4.jpg, from the rear right, 3000 x 2000, harvested
Scale: a pinhole camera fitted to each photo. Read by a circle of the lens's diameter (eyepiece_lens_d) about the axis, set back until its edge lies on the lens's: 0.15 in deep falls short of it and 0.45 past it; one photo
Elevation turret, its cap's top above the optical axis1.164 in ± 0.02 in 29.6 mmProvisionalPhoto: German Sport Guns SOT61000.jpg, right side, 3000 x 2000
Photo 1.164 in ± 0.02 in used
German Sport Guns SOT61000.jpg, right side, 3000 x 2000, harvested
Scale: scale from sig-tango-msr-1-6x24.tube_od = 1.1811 in, the tube's own width column by column: 276.1 px over columns 1170–1350, 275.5 px over columns 1545–1640, 274.6 px over columns 2025–2060, 273.0 px over columns 2290–2660; a line through them (rms 0.28 px) changes -1.5% from column 1170 to 2660, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1500)/width, the lens's axis taken to meet the image at column 1500; 233.4 px/in there. The axis is the tube's centre line (tilt -0.23°, rms 0.19 px). Lengths then scaled by 1.0125 so that the end faces are sig-tango-msr-1-6x24.length = 10.4 in apart: at the tube's scale they read 10.272 (-1.2%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.160 in over radius 0.591 (rms 0.002), the rear end's rim sags 0.055 in over radius 0.913 (rms 0.005). Read by y_max in x [2.5, 3.85] of the traced outline (tools/trace.py); the elevation turret's highest point above the tube's axis
Throw lever's tip above the optical axis, at 1x (straight up)1.867 in ± 0.02 in 47.4 mmProvisionalPhoto: German Sport Guns SOT61000.jpg, right side, 3000 x 2000
Photo 1.867 in ± 0.02 in used
German Sport Guns SOT61000.jpg, right side, 3000 x 2000, harvested
Scale: scale from sig-tango-msr-1-6x24.tube_od = 1.1811 in, the tube's own width column by column: 276.1 px over columns 1170–1350, 275.5 px over columns 1545–1640, 274.6 px over columns 2025–2060, 273.0 px over columns 2290–2660; a line through them (rms 0.28 px) changes -1.5% from column 1170 to 2660, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1500)/width, the lens's axis taken to meet the image at column 1500; 233.4 px/in there. The axis is the tube's centre line (tilt -0.23°, rms 0.19 px). Lengths then scaled by 1.0125 so that the end faces are sig-tango-msr-1-6x24.length = 10.4 in apart: at the tube's scale they read 10.272 (-1.2%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.160 in over radius 0.591 (rms 0.002), the rear end's rim sags 0.055 in over radius 0.913 (rms 0.005). Read by y_max in x [-1.0, -0.2] of the traced outline (tools/trace.py); the throw lever's tip above the tube's axis
Height in its ALPHA-MSR mount (as sold, SOT61000): the clamp's lowest point to the elevation turret's top2.971 in ± 0.04 in 75.5 mmConflictPhoto: German Sport Guns SOT61000.jpg, right side, 3000 x 2000
Photo 2.971 in ± 0.04 in used
German Sport Guns SOT61000.jpg, right side, 3000 x 2000, harvested
Scale: scale from sig-tango-msr-1-6x24.tube_od = 1.1811 in, the tube's own width column by column: 276.1 px over columns 1170–1350, 275.5 px over columns 1545–1640, 274.6 px over columns 2025–2060, 273.0 px over columns 2290–2660; a line through them (rms 0.28 px) changes -1.5% from column 1170 to 2660, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1500)/width, the lens's axis taken to meet the image at column 1500; 233.4 px/in there. The axis is the tube's centre line (tilt -0.23°, rms 0.19 px). Lengths then scaled by 1.0125 so that the end faces are sig-tango-msr-1-6x24.length = 10.4 in apart: at the tube's scale they read 10.272 (-1.2%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.160 in over radius 0.591 (rms 0.002), the rear end's rim sags 0.055 in over radius 0.913 (rms 0.005). Read by (y_max in x [2.5, 3.85]) − (y_min) of the traced outline (tools/trace.py); the elevation turret's top above the clamp's lowest point (the lever, which stands higher at 1x, left out)
Published “Maße: 264 x 70 x 80 mm”
German Sport Guns, SOT61000 (Technische Daten), a seller, read Oct 1, 2026 the page, harvested Oct 1, 2026
The third of three unlabelled figures.
Measured on the scope's own side view between named points. The retailer's unlabelled 80 mm matches neither this nor the height to the lever's tip.
right and gsg differ by 0.179 in beyond what each states it is good to.
Without the throw lever, which stands higher at 1x and swings round with the magnification ring. A retailer's unlabelled third figure, 80 mm, is neither this (75 mm) nor the height to the lever's tip (93 mm). The clamp's lowest point in the side view is its near lower edge, which a lens a few degrees above the axis shows about 0.04 in low.
Turret saddle's middle ahead of the frame's origin (where the turrets' axes cross the optical axis)3.174 in ± 0.02 in 80.6 mmProvisionalPhoto: German Sport Guns SOT61000.jpg, right side: the elevation turret, profiles.turret
Photo 3.174 in ± 0.02 in used
German Sport Guns SOT61000.jpg, right side: the elevation turret, profiles.turret, harvested
Scale: the traced outline's own: the 30 mm tube column by column, lengths to the published 10.4 in. Read by the middle of the elevation turret's traced outline, 2.545 to 3.803 in ahead of the origin: a cap turned about its own upright axis
Main tube behind the saddle, where it begins ahead of the magnification ring's housing0.19 in ± 0.02 in 4.8 mmProvisionalPhoto: German Sport Guns SOT61000.jpg, right side: the turned body, profiles.body
Photo 0.19 in ± 0.02 in used
German Sport Guns SOT61000.jpg, right side: the turned body, profiles.body, harvested
Scale: the traced body outline's own: the 30 mm tube column by column, lengths to the published 10.4 in (profiles.body). Read by where the outline's reach above the axis comes down to within 0.012 in of the tube's radius ahead of the magnification ring; the tube shows from there to 1.135 in, where the rear ring begins
Behind it the body widens to the magnification ring: a ring can't be clamped there.
Main tube behind the saddle, where it ends at the saddle2.386 in 60.6 mmProvisionalWorked out: {.saddle_x} - sqrt({.saddle_radius} * {.saddle_radius} - {.tube_od} * {.tube_od} / 4)
Photo 2.397 in ± 0.02 in
German Sport Guns SOT61000.jpg, right side: the turned body, profiles.body, harvested
Scale: the traced body outline's own: the 30 mm tube column by column, lengths to the published 10.4 in (profiles.body). Read by where the outline leaves the tube's radius (by 0.012 in) going up onto the saddle; the tube shows back from there to 1.828 in, where the rear ring ends
Worked out 2.3857 in used
{.saddle_x} - sqrt({.saddle_radius} * {.saddle_radius} - {.tube_od} * {.tube_od} / 4), harvested
The saddle as it is drawn: a ball about the turret station, which meets the tube here. The outline reads 0.011 in ahead, inside its own tolerance; the ball's is the end that keeps a ring off the saddle.
Main tube ahead of the saddle, where it begins at the saddle3.962 in 100.6 mmProvisionalWorked out: {.saddle_x} + sqrt({.saddle_radius} * {.saddle_radius} - {.tube_od} * {.tube_od} / 4)
Photo 3.946 in ± 0.02 in
German Sport Guns SOT61000.jpg, right side: the turned body, profiles.body, harvested
Scale: the traced body outline's own: the 30 mm tube column by column, lengths to the published 10.4 in (profiles.body). Read by where the outline comes down off the saddle to within 0.012 in of the tube's radius; the tube shows from there to 4.269 in, where the front ring begins
Worked out 3.9623 in used
{.saddle_x} + sqrt({.saddle_radius} * {.saddle_radius} - {.tube_od} * {.tube_od} / 4), harvested
As tube_rear_to: the ball the saddle is drawn as, 0.016 in ahead of where the outline reads it, inside the outline's tolerance.
Main tube ahead of the saddle, where it ends (the objective's front rim: a straight tube, no bell)6.992 in ± 0.02 in 177.6 mmProvisionalPhoto: German Sport Guns SOT61000.jpg, right side: the turned body, profiles.body
Photo 6.992 in ± 0.02 in used
German Sport Guns SOT61000.jpg, right side: the turned body, profiles.body, harvested
Scale: the traced body outline's own: the 30 mm tube column by column, lengths to the published 10.4 in (profiles.body). Read by the last of the outline at the tube's radius, behind the front rim's arc; the tube shows back from there to 5.031 in, where the front ring ends
The tube runs to the objective's front face (objective_front_x, 7.008): nothing but the end of the scope stops a ring here.
Turret caps (elevation and windage: the same cap), the flats round the knurled band6CorroboratedPhoto: German Sport Guns SOT61000.jpg, right side, 3000 x 2000
Photo 6 count used
German Sport Guns SOT61000.jpg, right side, 3000 x 2000, harvested
Scale: the 30 mm tube beside the turret: 233.0 px/in at the turret station (the trace's own scale there). Read by the windage cap face-on, unwrapped about its centre: six narrow bars up its chamfer 240 samples apart, 60 degrees, with the rim cut in between each pair
Photo 6 count
German Sport Guns SOT61000.jpg, right side, 3000 x 2000, harvested
Scale: the 30 mm tube beside the turret: 233.0 px/in at the turret station (the trace's own scale there). Read by the elevation cap in profile: the stretches of its band with no teeth (row-to-row contrast down each column, rows 773 to 808) are centred 29.4, 29.2, 29.7 and 29.5 degrees apart round a band 0.616 in in radius, wide and narrow by turns: twelve to a turn, six of each
Photo 6 count
SOT61000_6.jpg, from the front left, 3000 x 2000, harvested
Scale: a pinhole camera fitted to the photo, and the knob's surface unwrapped through it. Read by the elevation cap's band unwrapped from 60 to 212 degrees: two flats 54.5 degrees apart, a rib midway between them (the camera's fit leaves a few degrees)
Counted round the whole cap in one view; the profile and the oblique give the same spacing over the half each sees.
Round the band: a flat, a patch of knurl, a narrow plain rib, a patch of knurl, six times. The part's notes said eight flats until this was counted.
Turret caps, a flat across at the foot of the knurl beside it0.233 in ± 0.02 in 5.9 mmCorroboratedPhoto: German Sport Guns SOT61000.jpg, right side, 3000 x 2000
Photo 0.233 in ± 0.02 in used
German Sport Guns SOT61000.jpg, right side, 3000 x 2000, harvested
Scale: the 30 mm tube beside the turret: 233.0 px/in at the turret station (the trace's own scale there). Read by the flat facing the lens (9.5 degrees off square: nothing taken off for that, 1.4%), by eye on the lifted crop: its two edges at columns 1781 and 1835.5, 54.4 px
Photo 0.246 in ± 0.03 in
SOT61000_6.jpg, from the front left, 3000 x 2000, harvested
Scale: a pinhole camera fitted to the photo, and the knob's surface unwrapped through it. Read by the two flats in the unwrapped band are 23 and 24 degrees wide: the chord of 23.5 degrees at the roots' radius
Read on the straight view, at the turret's own scale; the oblique's is through a fitted camera and agrees within its ±.
A plane cut across the band. With no teeth showing, the stretch is 0.309 in across in the profile view (29.5 degrees at the teeth's tops): a plane through this chord at the teeth's roots cuts the teeth beside it short out to about that.
Turret caps, the plain rib between two patches of knurl0.08 in ± 0.015 in 2 mmProvisionalPhoto: German Sport Guns SOT61000.jpg, right side, 3000 x 2000
Photo 0.08 in ± 0.015 in used
German Sport Guns SOT61000.jpg, right side, 3000 x 2000, harvested
Scale: the 30 mm tube beside the turret: 233.0 px/in at the turret station (the trace's own scale there). Read by two ribs, 7.7 and 7.2 degrees of the band at 38.7 behind and 20.2 ahead of square: 7.5 degrees at the tops' radius, 0.616 in
Turret caps, the knurl's rows of teeth (up the band)4ProvisionalPhoto: German Sport Guns SOT61000.jpg, right side, 3000 x 2000
Photo 4 count used
German Sport Guns SOT61000.jpg, right side, 3000 x 2000, harvested
Scale: the 30 mm tube beside the turret: 233.0 px/in at the turret station (the trace's own scale there). Read by the elevation cap's silhouette, which has a patch of knurl at each edge: four teeth up the band, their tops between rows 775 and 803
Turret caps, the knurl's columns of teeth in a patch2ProvisionalPhoto: German Sport Guns SOT61000.jpg, right side, 3000 x 2000
Photo 2 count used
German Sport Guns SOT61000.jpg, right side, 3000 x 2000, harvested
Scale: the 30 mm tube beside the turret: 233.0 px/in at the turret station (the trace's own scale there). Read by three patches near the middle of the elevation cap's band (columns 1751 to 1773, 1846 to 1873, 1891 to 1915): the mean down each column has three dark grooves and two teeth between them
Three grooves to a patch (one at each edge, one between), 0.035 to 0.037 in apart.
Turret caps, the knurl's pitch (tooth to tooth)0.04 in ± 0.004 in 1 mmProvisionalPhoto: German Sport Guns SOT61000.jpg, right side, 3000 x 2000
Photo 0.04 in ± 0.004 in used
German Sport Guns SOT61000.jpg, right side, 3000 x 2000, harvested
Scale: the 30 mm tube beside the turret: 233.0 px/in at the turret station (the trace's own scale there). Read by the four teeth's tops up the elevation cap's silhouette span rows 775 to 803: three pitches in 28 px
Up the band. Round it the grooves read 0.035 to 0.037 in apart (8.0 to 8.5 px at the patches near the cap's middle), inside this one's ±: the teeth are taken as square.
Turret caps, the knurl's depth0.013 in ± 0.004 in 0.3 mmProvisionalPhoto: German Sport Guns SOT61000.jpg, right side, 3000 x 2000
Photo 0.0125 in ± 0.004 in used
German Sport Guns SOT61000.jpg, right side, 3000 x 2000, harvested
Scale: the 30 mm tube beside the turret: 233.0 px/in at the turret station (the trace's own scale there). Read by the elevation cap's silhouette across the band: 1.232 in across the teeth's tops, 1.207 across the grooves between them (rows 775 to 807)
Elevation cap as photographed: a flat's middle behind square to the right side9.5° ± 2°ProvisionalPhoto: German Sport Guns SOT61000.jpg, right side, 3000 x 2000
Photo 9.5 deg ± 2 deg used
German Sport Guns SOT61000.jpg, right side, 3000 x 2000, harvested
Scale: the 30 mm tube beside the turret: 233.0 px/in at the turret station (the trace's own scale there). Read by the wide plain stretch nearest the cap's middle runs from 24.3 degrees behind square to 5.2 ahead (columns 1774 to 1845 about the cap's axis at 1832.5)
Where the cap was left when SIG's photo was taken: it turns. The flat facing the right side is turned this far toward the eyepiece.
Windage cap as photographed: a rib below level, toward the muzzle (seen from the right)48.8° ± 3°ProvisionalPhoto: German Sport Guns SOT61000.jpg, right side, 3000 x 2000
Photo 48.75 deg ± 3 deg used
German Sport Guns SOT61000.jpg, right side, 3000 x 2000, harvested
Scale: the 30 mm tube beside the turret: 233.0 px/in at the turret station (the trace's own scale there). Read by the six bars up the cap's chamfer in the unwrapped view, at 48.75 degrees and every 60 from there, clockwise from the muzzle's direction as the photo has it
As the elevation cap's: where it was left. A rib is this far below the muzzle's direction, seen face-on from the right; the flats are midway between ribs (the rim is cut in there).
Illumination knob, the patches of knurl round its knurled ring12ProvisionalPhoto: SOT61000_6.jpg, from the front left, 3000 x 2000
Photo 12 count used
SOT61000_6.jpg, from the front left, 3000 x 2000, harvested
Scale: a pinhole camera fitted to the photo, and the knob's surface unwrapped through it. Read by the knurled ring unwrapped from 8 degrees behind the top to 136 ahead: lands centred 31 degrees apart, three of them in view, 11.6 to a turn
A patch of knurl and a plain land by turns, all the way round as far as the one view shows (a third of the ring).
Illumination knob, a plain land between two patches of knurl0.1 in ± 0.02 in 2.5 mmProvisionalPhoto: SOT61000_6.jpg, from the front left, 3000 x 2000
Photo 0.1 in ± 0.02 in used
SOT61000_6.jpg, from the front left, 3000 x 2000, harvested
Scale: a pinhole camera fitted to the photo, and the knob's surface unwrapped through it. Read by two lands, each 10 degrees of the ring in the unwrapped view, at its radius (illumination_ring_d / 2)
Illumination knob, the knurl's rows of teeth (across the ring)3ProvisionalPhoto: SOT61000_6.jpg, from the front left, 3000 x 2000
Photo 3 count used
SOT61000_6.jpg, from the front left, 3000 x 2000, harvested
Scale: a pinhole camera fitted to the photo, and the knob's surface unwrapped through it. Read by the patch best in view in the unwrapped ring: three rows of square teeth across it
Illumination knob, the knurl's columns of teeth in a patch4ProvisionalPhoto: SOT61000_6.jpg, from the front left, 3000 x 2000
Photo 4 count used
SOT61000_6.jpg, from the front left, 3000 x 2000, harvested
Scale: a pinhole camera fitted to the photo, and the knob's surface unwrapped through it. Read by the same patch: four columns of teeth (the one beside it, further round, reads four or five)
Illumination knob as photographed: a land's middle ahead of straight up32° ± 3°ProvisionalPhoto: SOT61000_6.jpg, from the front left, 3000 x 2000
Photo 32 deg ± 3 deg used
SOT61000_6.jpg, from the front left, 3000 x 2000, harvested
Scale: a pinhole camera fitted to the photo, and the knob's surface unwrapped through it. Read by the lands in the unwrapped ring are centred 32 and 63 degrees from straight up, toward the muzzle
It is the brightness dial: where it stands is the setting it was left at.
Magnification ring, the knurled panels round it (a smooth flat between each two)6CorroboratedPhoto: German Sport Guns SOT61000.jpg, right side, 3000 x 2000
Photo 6 count used
German Sport Guns SOT61000.jpg, right side, 3000 x 2000, harvested
Scale: the ring's own radius about the tube's axis: 222 px at this station (0.948 in at 234 px/in, the trace's scale there). Read by three knurled panels down the side, the grooves down their middles at rows 828, 1030 and near the lower edge, and the lines down the two smooth panels between at rows 922 and 1140: 57, -3, 25 and -32 degrees above level, so 60 degrees from one knurled panel to the next within 3; three a side, six a turn
Photo 6 count
German Sport Guns SOT61000_2.jpg, left side, 3000 x 2000, harvested
Scale: the ring's own radius about the tube's axis: 235 px at this station (0.948 in at 248.3 px/in in the axis's plane). Read by the same three knurled panels down this side, their grooves at rows 797, 1005 and 1206, and the two smooth panels' lines at rows 887 and 1117: 56, -2, -61, 27 and -30 degrees above level
The two side views are the two halves of one turn and count the same three a side; neither shows the underside.
Round the ring a knurled panel and a smooth flat by turns, 60 degrees from one knurled panel to the next. Each side view shows three knurled panels and the two smooth ones between them; the smooth one at the top carries the throw lever's base, and the one underneath shows in neither view: it is what the spacing leaves there, and the model leaves both round. The traced outline's lower edge has teeth in it at the ring's full reach, which a smooth panel underneath doesn't explain: with the knurl's tops at that reach the panels' spacing reads 60 degrees within 3; were the tops 3 to 4% further out it would read 56 to 58, with a wider panel under the lever. Not settled: it wants the ring unwrapped through a camera fitted to an oblique. Each smooth panel has a line down its middle about 0.017 in wide, which isn't drawn.
Magnification ring, a knurled panel's width round the ring27° ± 2°ProvisionalPhoto: German Sport Guns SOT61000.jpg and SOT61000_2.jpg, the right and left sides
Photo 27 deg ± 2 deg used
German Sport Guns SOT61000.jpg and SOT61000_2.jpg, the right and left sides, harvested
Scale: the ring's own radius about the tube's axis in each photo (222 and 235 px). Read by the panel that faces the lens: rows 982 to 1088 on the right photo (26 degrees) and 947 to 1060 on the left (27)
Two bands of knurl and the groove between them. The smooth flat between two panels is what is left of 60 degrees.
Magnification ring, the groove along a knurled panel between its two bands of knurl0.09 in ± 0.02 in 2.3 mmProvisionalPhoto: German Sport Guns SOT61000.jpg and SOT61000_2.jpg, the right and left sides
Photo 0.09 in ± 0.02 in used
German Sport Guns SOT61000.jpg and SOT61000_2.jpg, the right and left sides, harvested
Scale: the 30 mm tube: 234 and 248.3 px/in in the axis's plane; the panel facing the lens is 0.95 in nearer it and shows about 3% large. Read by the dark groove down the middle of the panel that faces the lens: 22 px on each photo (rows 1022 to 1045 and 992 to 1015), less the 3%
Its depth isn't read: it is drawn as deep as the knurl.
Magnification ring, the rows of teeth in a band of knurl (round the ring)3ProvisionalPhoto: German Sport Guns SOT61000.jpg and SOT61000_2.jpg, the right and left sides
Photo 3 count used
German Sport Guns SOT61000.jpg and SOT61000_2.jpg, the right and left sides, harvested
Scale: none: a count. Read by the two bands of the panel that faces the lens, and the bands above and below it, in both photos: three rows of teeth in each
Each row is about eighteen square teeth along the ring (0.058 in apart, as the rows are; not counted tooth by tooth). The model draws a row as one rib: the cuts across it aren't made.
Magnification ring, a band of knurl's length along the ring1.04 in ± 0.04 in 26.4 mmProvisionalPhoto: German Sport Guns SOT61000.jpg and SOT61000_2.jpg, the right and left sides
Photo 1.04 in ± 0.04 in used
German Sport Guns SOT61000.jpg and SOT61000_2.jpg, the right and left sides, harvested
Scale: the 30 mm tube: 234 and 248.3 px/in in the axis's plane; the panel facing the lens is 0.95 in nearer it and shows about 3% large. Read by the teeth of the panel that faces the lens: columns 822 to 1075 on the right photo (1.045 in) and 1992 to 2258 on the left (1.035)
Magnification ring, the knurl's depth0.017 in ± 0.006 in 0.4 mmProvisionalPhoto: German Sport Guns SOT61000.jpg, right side: the turned body, profiles.body
Photo 0.017 in ± 0.006 in used
German Sport Guns SOT61000.jpg, right side: the turned body, profiles.body, harvested
Scale: the traced body outline's own: the 30 mm tube column by column (profiles.body). Read by the ring's silhouette along its lower edge, where a band of knurl is in profile: the outline's teeth, tops to roots
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.