Scope
Primary Arms SLx 1-6x24mm SFP Rifle Scope Gen IV - Illuminated ACSS Nova Fiber Wire Reticle - Red Dot Bright®
A 1-6x low-power variable scope (second focal plane, illuminated ACSS NOVA reticle) on a 30 mm tube, 10.4 in long: capped turrets, an illumination knob on the left with its battery under the cap, and "an integrated dovetail throw lever" on the magnification ring. It comes without a mount (T.REX ARMS lists what is in the box: the scope, a cleaning cloth, two scope caps and two allen keys; Primary Arms' page says "Mount Compatibility 30mm"): it goes in a scope mount bored for a 30 mm tube and slides in the rings to set its eye relief. Drawn as photographed: magnification at 1x, the throw lever straight up.

- Weight
- 17.85 oz Confirmedpublished: Primary Arms, SLx 1-6x24 Second Focal Plane Optic Manual (the product page's "PA-SLX-1-6X24S-NOVA MANUAL 1"), its specifications page (the sheet numbered 8), the maker, read Oct 13, 2026
- Lowest price
- $299.99 at Primary Arms, read Nov 21, 2026 (Flat Dark Earth)
- Maker's number
- PA-SLX-1-6X24S-NOVA
- Colours
- Black, Flat Dark Earth
- Drawn as
- modelled
- Maker's page
- primaryarms.com
In “Aero 16 in, slick rail and a 1-6x”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length (the objective's front face to the eyepiece's rear face)10.4 in 264.2 mmConfirmedPublished: Primary Arms, SLx 1-6x24mm SFP Rifle Scope Gen IV - Illuminated ACSS Nova Fiber Wire Reticle - Red Dot Bright® (SKU: PA-SLX-1-6X24S-NOVA), product page, the maker, read Oct 13, 2026
Published “Length w/o Lens Covers: 10.4 in.” used
Primary Arms, SLx 1-6x24mm SFP Rifle Scope Gen IV - Illuminated ACSS Nova Fiber Wire Reticle - Red Dot Bright® (SKU: PA-SLX-1-6X24S-NOVA), product page, the maker, read Oct 13, 2026 the page, harvested Oct 13, 2026
Published “Length (w/o Lens Covers): 10.4 in”
Primary Arms, SLx 1-6x24 Second Focal Plane Optic Manual (the product page's "PA-SLX-1-6X24S-NOVA MANUAL 1"), its specifications page (the sheet numbered 8), the maker, read Oct 13, 2026 the page, harvested Oct 13, 2026
Published “Length 10.4 in.”
T.REX ARMS, Primary Arms SLx 1-6x24 SFP Rifle Scope Gen IV (Quick Specifications), a seller, read Oct 13, 2026 the page, harvested Oct 13, 2026
The maker's page for this product; its manual and a seller say the same.
Without the lens covers it ships with ("Scope caps included"), which aren't drawn.
Main tube diameter1.181 in 30 mmConfirmedPublished: Primary Arms, SLx 1-6x24 Second Focal Plane Optic Manual (the product page's "PA-SLX-1-6X24S-NOVA MANUAL 1"), its specifications page (the sheet numbered 8), the maker, read Oct 13, 2026
Published “Tube Diameter: 30 mm” used
Primary Arms, SLx 1-6x24 Second Focal Plane Optic Manual (the product page's "PA-SLX-1-6X24S-NOVA MANUAL 1"), its specifications page (the sheet numbered 8), the maker, read Oct 13, 2026 the page, harvested Oct 13, 2026
Published “Mount Compatibility 30mm”
Primary Arms, SLx 1-6x24mm SFP Rifle Scope Gen IV - Illuminated ACSS Nova Fiber Wire Reticle - Red Dot Bright® (SKU: PA-SLX-1-6X24S-NOVA), product page, the maker, read Oct 13, 2026 the page, harvested Oct 13, 2026
The page's table has no row for the tube: this is what it says a mount has to be.
Published “High-strength 30mm main tube”
T.REX ARMS, Primary Arms SLx 1-6x24 SFP Rifle Scope Gen IV (Quick Specifications), a seller, read Oct 13, 2026 the page, harvested Oct 13, 2026
The manual names the tube's diameter; the page's mount row and a seller's sentence say the same 30 mm.
Objective lens diameter0.945 in 24 mmConfirmedPublished: Primary Arms, SLx 1-6x24 Second Focal Plane Optic Manual (the product page's "PA-SLX-1-6X24S-NOVA MANUAL 1"), its specifications page (the sheet numbered 8), the maker, read Oct 13, 2026
Published “Objective Lens Diameter: 24 mm” used
Primary Arms, SLx 1-6x24 Second Focal Plane Optic Manual (the product page's "PA-SLX-1-6X24S-NOVA MANUAL 1"), its specifications page (the sheet numbered 8), the maker, read Oct 13, 2026 the page, harvested Oct 13, 2026
Published “Objective Lens Diameter: 24mm”
Primary Arms, SLx 1-6x24mm SFP Rifle Scope Gen IV - Illuminated ACSS Nova Fiber Wire Reticle - Red Dot Bright® (SKU: PA-SLX-1-6X24S-NOVA), product page, the maker, read Oct 13, 2026 the page, harvested Oct 13, 2026
The maker's manual and its page agree.
Eye relief4 in ± 0.005 in 101.6 mmConfirmedPublished: Primary Arms, SLx 1-6x24mm SFP Rifle Scope Gen IV - Illuminated ACSS Nova Fiber Wire Reticle - Red Dot Bright® (SKU: PA-SLX-1-6X24S-NOVA), product page, the maker, read Oct 13, 2026
Published “Eye Relief 4.00 in” used
Primary Arms, SLx 1-6x24mm SFP Rifle Scope Gen IV - Illuminated ACSS Nova Fiber Wire Reticle - Red Dot Bright® (SKU: PA-SLX-1-6X24S-NOVA), product page, the maker, read Oct 13, 2026 the page, harvested Oct 13, 2026
Published “Eye Relief: 4 in”
Primary Arms, SLx 1-6x24 Second Focal Plane Optic Manual (the product page's "PA-SLX-1-6X24S-NOVA MANUAL 1"), its specifications page (the sheet numbered 8), the maker, read Oct 13, 2026 the page, harvested Oct 13, 2026
The page's table states it to a hundredth; the manual's whole number is the same.
One figure for the whole range of magnification: the maker gives none for 1x and 6x apart.
Main tube behind the saddle, where it begins (ahead of the magnification ring)3.23 in ± 0.02 in 82 mmCorroboratedPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg (the Aurora 5.56 yard sibling: the same body), right side: the turned body
Photo 3.23 in ± 0.02 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg (the Aurora 5.56 yard sibling: the same body), right side: the turned body, harvested
Scale: scale from primary-arms-slx-1-6x24-gen-iv.tube_od = 1.1811 in, the tube's own width column by column: 216.7 px over columns 760–980, 216.8 px over columns 990–1210, 216.4 px over columns 1505–1760, 215.5 px over columns 1770–2035; a line through them (rms 0.27 px) changes -0.6% from column 760 to 2035, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 183.4 px/in there. The axis is the tube's centre line (tilt -0.19°, rms 0.08 px). Lengths then scaled by 1.0140 so that the end faces are primary-arms-slx-1-6x24-gen-iv.length = 10.4 in apart: at the tube's scale they read 10.256 (-1.4%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.106 in over radius 0.588 (rms 0.001), the rear end's rim sags 0.190 in over radius 0.855 (rms 0.002). Read by x_max in x [2.6, 4.5] in y [0.6026, 2.0] of the traced outline (tools/trace.py); where the outline's reach above the axis comes down to within 0.012 in of the tube's radius ahead of the magnification ring
Photo 3.246 in ± 0.02 in
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg (the Aurora 5.56 yard sibling: the same body), left side: the turned body, harvested
Scale: scale from primary-arms-slx-1-6x24-gen-iv.tube_od = 1.1811 in, the tube's own width column by column: 221.6 px over columns 140–410, 222.6 px over columns 420–690, 223.2 px over columns 980–1210, 223.1 px over columns 1220–1455; a line through them (rms 0.28 px) changes +0.8% from column 140 to 1455, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 188.8 px/in there. The axis is the tube's centre line (tilt +0.26°, rms 0.06 px). Lengths then scaled by 1.0145 so that the end faces are primary-arms-slx-1-6x24-gen-iv.length = 10.4 in apart: at the tube's scale they read 10.251 (-1.4%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.137 in over radius 0.589 (rms 0.002), the rear end's rim sags 0.147 in over radius 0.851 (rms 0.002). Read by x_max in x [2.6, 4.5] in y [0.6026, 2.0] of the traced outline (tools/trace.py); where the outline's reach above the axis comes down to within 0.012 in of the tube's radius ahead of the magnification ring (the left side, mirrored)
The right side is the photo the outlines are traced from; the left side, mirrored and traced on its own, agrees within its ±.
Behind it the body widens in a cone to the magnification ring: a ring can't be clamped there. Both side views, each by its own trace.
Main tube behind the saddle, where it ends at the saddle5.861 in ± 0.021 in 148.9 mmCorroboratedPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg (the Aurora 5.56 yard sibling: the same body), right side: the turned body
Photo 5.861 in ± 0.021 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg (the Aurora 5.56 yard sibling: the same body), right side: the turned body, harvested
Scale: scale from primary-arms-slx-1-6x24-gen-iv.tube_od = 1.1811 in, the tube's own width column by column: 216.7 px over columns 760–980, 216.8 px over columns 990–1210, 216.4 px over columns 1505–1760, 215.5 px over columns 1770–2035; a line through them (rms 0.27 px) changes -0.6% from column 760 to 2035, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 183.4 px/in there. The axis is the tube's centre line (tilt -0.19°, rms 0.08 px). Lengths then scaled by 1.0140 so that the end faces are primary-arms-slx-1-6x24-gen-iv.length = 10.4 in apart: at the tube's scale they read 10.256 (-1.4%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.106 in over radius 0.588 (rms 0.001), the rear end's rim sags 0.190 in over radius 0.855 (rms 0.002). Read by x_min in x [4.5, 6.6] in y [0.6026, 2.0] of the traced outline (tools/trace.py); where the outline leaves the tube's radius (by 0.012 in) going up onto the saddle
Photo 5.875 in ± 0.021 in
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg (the Aurora 5.56 yard sibling: the same body), left side: the turned body, harvested
Scale: scale from primary-arms-slx-1-6x24-gen-iv.tube_od = 1.1811 in, the tube's own width column by column: 221.6 px over columns 140–410, 222.6 px over columns 420–690, 223.2 px over columns 980–1210, 223.1 px over columns 1220–1455; a line through them (rms 0.28 px) changes +0.8% from column 140 to 1455, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 188.8 px/in there. The axis is the tube's centre line (tilt +0.26°, rms 0.06 px). Lengths then scaled by 1.0145 so that the end faces are primary-arms-slx-1-6x24-gen-iv.length = 10.4 in apart: at the tube's scale they read 10.251 (-1.4%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.137 in over radius 0.589 (rms 0.002), the rear end's rim sags 0.147 in over radius 0.851 (rms 0.002). Read by x_min in x [4.5, 6.6] in y [0.6026, 2.0] of the traced outline (tools/trace.py); where the outline leaves the tube's radius (by 0.012 in) going up onto the saddle (the left side, mirrored)
The right side is the photo the outlines are traced from; the left side, mirrored and traced on its own, agrees within its ±.
Where the saddle's rear shoulder begins. The ball the saddle is drawn as (saddle_radius) meets the tube here by construction.
Main tube ahead of the saddle, where it begins at the saddle7.341 in ± 0.025 in 186.5 mmCorroboratedPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg (the Aurora 5.56 yard sibling: the same body), right side: the turned body
Photo 7.341 in ± 0.025 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg (the Aurora 5.56 yard sibling: the same body), right side: the turned body, harvested
Scale: scale from primary-arms-slx-1-6x24-gen-iv.tube_od = 1.1811 in, the tube's own width column by column: 216.7 px over columns 760–980, 216.8 px over columns 990–1210, 216.4 px over columns 1505–1760, 215.5 px over columns 1770–2035; a line through them (rms 0.27 px) changes -0.6% from column 760 to 2035, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 183.4 px/in there. The axis is the tube's centre line (tilt -0.19°, rms 0.08 px). Lengths then scaled by 1.0140 so that the end faces are primary-arms-slx-1-6x24-gen-iv.length = 10.4 in apart: at the tube's scale they read 10.256 (-1.4%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.106 in over radius 0.588 (rms 0.001), the rear end's rim sags 0.190 in over radius 0.855 (rms 0.002). Read by x_max in x [6.6, 8.5] in y [0.6026, 2.0] of the traced outline (tools/trace.py); where the outline comes down off the saddle to within 0.012 in of the tube's radius
Photo 7.357 in ± 0.025 in
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg (the Aurora 5.56 yard sibling: the same body), left side: the turned body, harvested
Scale: scale from primary-arms-slx-1-6x24-gen-iv.tube_od = 1.1811 in, the tube's own width column by column: 221.6 px over columns 140–410, 222.6 px over columns 420–690, 223.2 px over columns 980–1210, 223.1 px over columns 1220–1455; a line through them (rms 0.28 px) changes +0.8% from column 140 to 1455, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 188.8 px/in there. The axis is the tube's centre line (tilt +0.26°, rms 0.06 px). Lengths then scaled by 1.0145 so that the end faces are primary-arms-slx-1-6x24-gen-iv.length = 10.4 in apart: at the tube's scale they read 10.251 (-1.4%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.137 in over radius 0.589 (rms 0.002), the rear end's rim sags 0.147 in over radius 0.851 (rms 0.002). Read by x_max in x [6.6, 8.5] in y [0.6026, 2.0] of the traced outline (tools/trace.py); where the outline comes down off the saddle to within 0.012 in of the tube's radius (the left side, mirrored)
The right side is the photo the outlines are traced from; the left side, mirrored and traced on its own, agrees within its ±.
Where the saddle's front shoulder ends: the saddle is 1.48 in long, which is what has to go between a mount's two rings.
Main tube ahead of the saddle, where it ends (the front face of a straight tube)10.413 in ± 0.035 in 264.5 mmCorroboratedPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg (the Aurora 5.56 yard sibling: the same body), right side: the turned body
Photo 10.413 in ± 0.035 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg (the Aurora 5.56 yard sibling: the same body), right side: the turned body, harvested
Scale: scale from primary-arms-slx-1-6x24-gen-iv.tube_od = 1.1811 in, the tube's own width column by column: 216.7 px over columns 760–980, 216.8 px over columns 990–1210, 216.4 px over columns 1505–1760, 215.5 px over columns 1770–2035; a line through them (rms 0.27 px) changes -0.6% from column 760 to 2035, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 183.4 px/in there. The axis is the tube's centre line (tilt -0.19°, rms 0.08 px). Lengths then scaled by 1.0140 so that the end faces are primary-arms-slx-1-6x24-gen-iv.length = 10.4 in apart: at the tube's scale they read 10.256 (-1.4%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.106 in over radius 0.588 (rms 0.001), the rear end's rim sags 0.190 in over radius 0.855 (rms 0.002). Read by x_max in x [9.0, 11.0] in y [0.5786, 0.62] of the traced outline (tools/trace.py); the last of the outline at the tube's radius (within 0.012 in), at the front rim: a straight tube to the objective's face
Photo 10.422 in ± 0.035 in
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg (the Aurora 5.56 yard sibling: the same body), left side: the turned body, harvested
Scale: scale from primary-arms-slx-1-6x24-gen-iv.tube_od = 1.1811 in, the tube's own width column by column: 221.6 px over columns 140–410, 222.6 px over columns 420–690, 223.2 px over columns 980–1210, 223.1 px over columns 1220–1455; a line through them (rms 0.28 px) changes +0.8% from column 140 to 1455, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 188.8 px/in there. The axis is the tube's centre line (tilt +0.26°, rms 0.06 px). Lengths then scaled by 1.0145 so that the end faces are primary-arms-slx-1-6x24-gen-iv.length = 10.4 in apart: at the tube's scale they read 10.251 (-1.4%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.137 in over radius 0.589 (rms 0.002), the rear end's rim sags 0.147 in over radius 0.851 (rms 0.002). Read by x_max in x [9.0, 11.0] in y [0.5786, 0.62] of the traced outline (tools/trace.py); the last of the outline at the tube's radius (within 0.012 in), at the front rim (the left side, mirrored)
The right side is the photo the outlines are traced from; the left side, mirrored and traced on its own, agrees within its ±.
A straight tube to the objective's front face, with no bell: nothing but the end of the scope stops a ring here. The reading is the outline's last point at the tube's radius, 0.012 in past the face itself (objective_front_x, 10.401), inside both readings' ±.
eyepiece rear x0.001 in ± 0.03 in 0 mmCorroboratedPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg (the Aurora 5.56 yard sibling: the same body), right side, 2200 x 1467
Photo 0.001 in ± 0.03 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg (the Aurora 5.56 yard sibling: the same body), right side, 2200 x 1467, harvested
Scale: scale from primary-arms-slx-1-6x24-gen-iv.tube_od = 1.1811 in, the tube's own width column by column: 216.7 px over columns 760–980, 216.8 px over columns 990–1210, 216.4 px over columns 1505–1760, 215.5 px over columns 1770–2035; a line through them (rms 0.27 px) changes -0.6% from column 760 to 2035, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 183.4 px/in there. The axis is the tube's centre line (tilt -0.19°, rms 0.08 px). Lengths then scaled by 1.0140 so that the end faces are primary-arms-slx-1-6x24-gen-iv.length = 10.4 in apart: at the tube's scale they read 10.256 (-1.4%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.106 in over radius 0.588 (rms 0.001), the rear end's rim sags 0.190 in over radius 0.855 (rms 0.002). Read by the min end's face: the silhouette's tip at -0.192 less its rim's arc, 0.193 in of sag at radius 0.855353 (the end is seen from 12.7° off square; arc fitted over 121 rows, rms 0.002) of the traced outline (tools/trace.py); the eyepiece's rear face, behind its rim's arc
Photo 0 in ± 0.03 in
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg (the Aurora 5.56 yard sibling: the same body), left side, 2200 x 1467, harvested
Scale: scale from primary-arms-slx-1-6x24-gen-iv.tube_od = 1.1811 in, the tube's own width column by column: 221.6 px over columns 140–410, 222.6 px over columns 420–690, 223.2 px over columns 980–1210, 223.1 px over columns 1220–1455; a line through them (rms 0.28 px) changes +0.8% from column 140 to 1455, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 188.8 px/in there. The axis is the tube's centre line (tilt +0.26°, rms 0.06 px). Lengths then scaled by 1.0145 so that the end faces are primary-arms-slx-1-6x24-gen-iv.length = 10.4 in apart: at the tube's scale they read 10.251 (-1.4%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.137 in over radius 0.589 (rms 0.002), the rear end's rim sags 0.147 in over radius 0.851 (rms 0.002). Read by the min end's face: the silhouette's tip at -0.149 less its rim's arc, 0.149 in of sag at radius 0.85063 (the end is seen from 9.9° off square; arc fitted over 118 rows, rms 0.002) of the traced outline (tools/trace.py); the eyepiece's rear face, behind its rim's arc (the left side, mirrored)
The right side is the photo the outlines are traced from; the left side, mirrored and traced on its own, agrees within its ±.
objective front x10.401 in ± 0.035 in 264.2 mmCorroboratedPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg (the Aurora 5.56 yard sibling: the same body), right side, 2200 x 1467
Photo 10.401 in ± 0.035 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg (the Aurora 5.56 yard sibling: the same body), right side, 2200 x 1467, harvested
Scale: scale from primary-arms-slx-1-6x24-gen-iv.tube_od = 1.1811 in, the tube's own width column by column: 216.7 px over columns 760–980, 216.8 px over columns 990–1210, 216.4 px over columns 1505–1760, 215.5 px over columns 1770–2035; a line through them (rms 0.27 px) changes -0.6% from column 760 to 2035, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 183.4 px/in there. The axis is the tube's centre line (tilt -0.19°, rms 0.08 px). Lengths then scaled by 1.0140 so that the end faces are primary-arms-slx-1-6x24-gen-iv.length = 10.4 in apart: at the tube's scale they read 10.256 (-1.4%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.106 in over radius 0.588 (rms 0.001), the rear end's rim sags 0.190 in over radius 0.855 (rms 0.002). Read by the max end's face: the silhouette's tip at 10.509 less its rim's arc, 0.108 in of sag at radius 0.588022 (the end is seen from 10.4° off square; arc fitted over 121 rows, rms 0.001) of the traced outline (tools/trace.py); the objective's front face, behind its rim's arc
Photo 10.4 in ± 0.035 in
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg (the Aurora 5.56 yard sibling: the same body), left side, 2200 x 1467, harvested
Scale: scale from primary-arms-slx-1-6x24-gen-iv.tube_od = 1.1811 in, the tube's own width column by column: 221.6 px over columns 140–410, 222.6 px over columns 420–690, 223.2 px over columns 980–1210, 223.1 px over columns 1220–1455; a line through them (rms 0.28 px) changes +0.8% from column 140 to 1455, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 188.8 px/in there. The axis is the tube's centre line (tilt +0.26°, rms 0.06 px). Lengths then scaled by 1.0145 so that the end faces are primary-arms-slx-1-6x24-gen-iv.length = 10.4 in apart: at the tube's scale they read 10.251 (-1.4%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.137 in over radius 0.589 (rms 0.002), the rear end's rim sags 0.147 in over radius 0.851 (rms 0.002). Read by the max end's face: the silhouette's tip at 10.540 less its rim's arc, 0.139 in of sag at radius 0.589387 (the end is seen from 13.3° off square; arc fitted over 121 rows, rms 0.002) of the traced outline (tools/trace.py); the objective's front face, behind its rim's arc (the left side, mirrored)
The right side is the photo the outlines are traced from; the left side, mirrored and traced on its own, agrees within its ±.
elevation top above axis1.232 in ± 0.02 in 31.3 mmCorroboratedPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg (the Aurora 5.56 yard sibling: the same body), right side, 2200 x 1467
Photo 1.232 in ± 0.02 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg (the Aurora 5.56 yard sibling: the same body), right side, 2200 x 1467, harvested
Scale: scale from primary-arms-slx-1-6x24-gen-iv.tube_od = 1.1811 in, the tube's own width column by column: 216.7 px over columns 760–980, 216.8 px over columns 990–1210, 216.4 px over columns 1505–1760, 215.5 px over columns 1770–2035; a line through them (rms 0.27 px) changes -0.6% from column 760 to 2035, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 183.4 px/in there. The axis is the tube's centre line (tilt -0.19°, rms 0.08 px). Lengths then scaled by 1.0140 so that the end faces are primary-arms-slx-1-6x24-gen-iv.length = 10.4 in apart: at the tube's scale they read 10.256 (-1.4%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.106 in over radius 0.588 (rms 0.001), the rear end's rim sags 0.190 in over radius 0.855 (rms 0.002). Read by y_max in x [5.8, 7.5] of the traced outline (tools/trace.py); the elevation turret's highest point above the tube's axis
Photo 1.242 in ± 0.02 in
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg (the Aurora 5.56 yard sibling: the same body), left side, 2200 x 1467, harvested
Scale: scale from primary-arms-slx-1-6x24-gen-iv.tube_od = 1.1811 in, the tube's own width column by column: 221.6 px over columns 140–410, 222.6 px over columns 420–690, 223.2 px over columns 980–1210, 223.1 px over columns 1220–1455; a line through them (rms 0.28 px) changes +0.8% from column 140 to 1455, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 188.8 px/in there. The axis is the tube's centre line (tilt +0.26°, rms 0.06 px). Lengths then scaled by 1.0145 so that the end faces are primary-arms-slx-1-6x24-gen-iv.length = 10.4 in apart: at the tube's scale they read 10.251 (-1.4%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.137 in over radius 0.589 (rms 0.002), the rear end's rim sags 0.147 in over radius 0.851 (rms 0.002). Read by y_max in x [5.8, 7.5] of the traced outline (tools/trace.py); the elevation turret's highest point above the tube's axis (the left side, mirrored)
The right side is the photo the outlines are traced from; the left side, mirrored and traced on its own, agrees within its ±.
lever tip above axis1.611 in ± 0.02 in 40.9 mmCorroboratedPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg (the Aurora 5.56 yard sibling: the same body), right side, 2200 x 1467
Photo 1.611 in ± 0.02 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg (the Aurora 5.56 yard sibling: the same body), right side, 2200 x 1467, harvested
Scale: scale from primary-arms-slx-1-6x24-gen-iv.tube_od = 1.1811 in, the tube's own width column by column: 216.7 px over columns 760–980, 216.8 px over columns 990–1210, 216.4 px over columns 1505–1760, 215.5 px over columns 1770–2035; a line through them (rms 0.27 px) changes -0.6% from column 760 to 2035, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 183.4 px/in there. The axis is the tube's centre line (tilt -0.19°, rms 0.08 px). Lengths then scaled by 1.0140 so that the end faces are primary-arms-slx-1-6x24-gen-iv.length = 10.4 in apart: at the tube's scale they read 10.256 (-1.4%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.106 in over radius 0.588 (rms 0.001), the rear end's rim sags 0.190 in over radius 0.855 (rms 0.002). Read by y_max in x [2.0, 3.3] of the traced outline (tools/trace.py); the throw lever's tip above the tube's axis
Photo 1.609 in ± 0.02 in
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg (the Aurora 5.56 yard sibling: the same body), left side, 2200 x 1467, harvested
Scale: scale from primary-arms-slx-1-6x24-gen-iv.tube_od = 1.1811 in, the tube's own width column by column: 221.6 px over columns 140–410, 222.6 px over columns 420–690, 223.2 px over columns 980–1210, 223.1 px over columns 1220–1455; a line through them (rms 0.28 px) changes +0.8% from column 140 to 1455, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 188.8 px/in there. The axis is the tube's centre line (tilt +0.26°, rms 0.06 px). Lengths then scaled by 1.0145 so that the end faces are primary-arms-slx-1-6x24-gen-iv.length = 10.4 in apart: at the tube's scale they read 10.251 (-1.4%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.137 in over radius 0.589 (rms 0.002), the rear end's rim sags 0.147 in over radius 0.851 (rms 0.002). Read by y_max in x [2.0, 3.3] of the traced outline (tools/trace.py); the throw lever's tip above the tube's axis (the left side, mirrored)
The right side is the photo the outlines are traced from; the left side, mirrored and traced on its own, agrees within its ±.
windage reach1.234 in ± 0.03 in 31.3 mmProvisionalPhoto: Primary Arms, SLx 1-6x24 Second Focal Plane Optic Manual, the sheet numbered 4: the scope from above, 700 x 174 px
Photo 1.234 in ± 0.03 in used
Primary Arms, SLx 1-6x24 Second Focal Plane Optic Manual, the sheet numbered 4: the scope from above, 700 x 174 px, harvested
Scale: scale from primary-arms-slx-1-6x24-gen-iv.tube_od = 1.1811 in, the tube's own width column by column: 77.0 px over columns 14–100, 77.0 px over columns 106–196, 77.3 px over columns 308–384, 77.3 px over columns 390–462; a line through them (rms 0.09 px) changes +0.6% from column 14 to 462, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 350)/width, the lens's axis taken to meet the image at column 350; 65.4 px/in there. The axis is the tube's centre line (tilt +0.34°, rms 0.10 px). Lengths then scaled by 0.9998 so that the end faces are primary-arms-slx-1-6x24-gen-iv.length = 10.4 in apart: at the tube's scale they read 10.402 (+0.0%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.136 in over radius 0.586 (rms 0.010), the rear end's rim sags 0.124 in over radius 0.853 (rms 0.005). Read by y_max in x [5.8, 7.5] of the traced outline (tools/trace.py); the windage turret's cap, its furthest point from the tube's axis toward the scope's right
illumination reach1.387 in ± 0.03 in 35.2 mmProvisionalPhoto: Primary Arms, SLx 1-6x24 Second Focal Plane Optic Manual, the sheet numbered 4: the scope from above, 700 x 174 px
Photo 1.387 in ± 0.03 in used
Primary Arms, SLx 1-6x24 Second Focal Plane Optic Manual, the sheet numbered 4: the scope from above, 700 x 174 px, harvested
Scale: scale from primary-arms-slx-1-6x24-gen-iv.tube_od = 1.1811 in, the tube's own width column by column: 77.0 px over columns 14–100, 77.0 px over columns 106–196, 77.3 px over columns 308–384, 77.3 px over columns 390–462; a line through them (rms 0.09 px) changes +0.6% from column 14 to 462, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 350)/width, the lens's axis taken to meet the image at column 350; 65.4 px/in there. The axis is the tube's centre line (tilt +0.34°, rms 0.10 px). Lengths then scaled by 0.9998 so that the end faces are primary-arms-slx-1-6x24-gen-iv.length = 10.4 in apart: at the tube's scale they read 10.402 (+0.0%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.136 in over radius 0.586 (rms 0.010), the rear end's rim sags 0.124 in over radius 0.853 (rms 0.005). Read by −y_min in x [5.8, 7.5] of the traced outline (tools/trace.py); the illumination knob's battery cap, its furthest point from the tube's axis toward the scope's left
saddle flat bottom0.793 in ± 0.02 in 20.1 mmProvisionalPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg (the Aurora 5.56 yard sibling: the same body), right side: the turned body
Photo 0.793 in ± 0.02 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg (the Aurora 5.56 yard sibling: the same body), right side: the turned body, harvested
Scale: scale from primary-arms-slx-1-6x24-gen-iv.tube_od = 1.1811 in, the tube's own width column by column: 216.7 px over columns 760–980, 216.8 px over columns 990–1210, 216.4 px over columns 1505–1760, 215.5 px over columns 1770–2035; a line through them (rms 0.27 px) changes -0.6% from column 760 to 2035, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 183.4 px/in there. The axis is the tube's centre line (tilt -0.19°, rms 0.08 px). Lengths then scaled by 1.0140 so that the end faces are primary-arms-slx-1-6x24-gen-iv.length = 10.4 in apart: at the tube's scale they read 10.256 (-1.4%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.106 in over radius 0.588 (rms 0.001), the rear end's rim sags 0.190 in over radius 0.855 (rms 0.002). Read by −y_min in x [6.3, 6.9] of the traced outline (tools/trace.py); the saddle's underside below the axis, under the turrets' station
magnification ring r0.91 in ± 0.015 in 23.1 mmProvisionalPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg (the Aurora 5.56 yard sibling: the same body), right side: the turned body
Photo 0.91 in ± 0.015 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg (the Aurora 5.56 yard sibling: the same body), right side: the turned body, harvested
Scale: scale from primary-arms-slx-1-6x24-gen-iv.tube_od = 1.1811 in, the tube's own width column by column: 216.7 px over columns 760–980, 216.8 px over columns 990–1210, 216.4 px over columns 1505–1760, 215.5 px over columns 1770–2035; a line through them (rms 0.27 px) changes -0.6% from column 760 to 2035, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 183.4 px/in there. The axis is the tube's centre line (tilt -0.19°, rms 0.08 px). Lengths then scaled by 1.0140 so that the end faces are primary-arms-slx-1-6x24-gen-iv.length = 10.4 in apart: at the tube's scale they read 10.256 (-1.4%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.106 in over radius 0.588 (rms 0.001), the rear end's rim sags 0.190 in over radius 0.855 (rms 0.002). Read by y_max in x [2.0, 3.2] of the traced outline (tools/trace.py); the magnification ring at its lugs' tops, above the axis (the body alone: what shows below the axis, under the throw lever)
eyepiece r0.873 in ± 0.015 in 22.2 mmProvisionalPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg (the Aurora 5.56 yard sibling: the same body), right side: the turned body
Photo 0.873 in ± 0.015 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg (the Aurora 5.56 yard sibling: the same body), right side: the turned body, harvested
Scale: scale from primary-arms-slx-1-6x24-gen-iv.tube_od = 1.1811 in, the tube's own width column by column: 216.7 px over columns 760–980, 216.8 px over columns 990–1210, 216.4 px over columns 1505–1760, 215.5 px over columns 1770–2035; a line through them (rms 0.27 px) changes -0.6% from column 760 to 2035, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 183.4 px/in there. The axis is the tube's centre line (tilt -0.19°, rms 0.08 px). Lengths then scaled by 1.0140 so that the end faces are primary-arms-slx-1-6x24-gen-iv.length = 10.4 in apart: at the tube's scale they read 10.256 (-1.4%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.106 in over radius 0.588 (rms 0.001), the rear end's rim sags 0.190 in over radius 0.855 (rms 0.002). Read by y_max in x [0.8, 1.8] of the traced outline (tools/trace.py); the eyepiece's housing above the axis
saddle flat top0.739 in ± 0.02 in 18.8 mmProvisionalPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg (the Aurora 5.56 yard sibling: the same body), right side: the elevation turret
Photo 0.739 in ± 0.02 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg (the Aurora 5.56 yard sibling: the same body), right side: the elevation turret, harvested
Scale: scale from primary-arms-slx-1-6x24-gen-iv.tube_od = 1.1811 in, the tube's own width column by column: 216.7 px over columns 760–980, 216.8 px over columns 990–1210, 216.4 px over columns 1505–1760, 215.5 px over columns 1770–2035; a line through them (rms 0.27 px) changes -0.6% from column 760 to 2035, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 183.4 px/in there. The axis is the tube's centre line (tilt -0.19°, rms 0.08 px). Lengths then scaled by 1.0140 so that the end faces are primary-arms-slx-1-6x24-gen-iv.length = 10.4 in apart: at the tube's scale they read 10.256 (-1.4%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.106 in over radius 0.588 (rms 0.001), the rear end's rim sags 0.190 in over radius 0.855 (rms 0.002). Read by y_min of the traced outline (tools/trace.py); the elevation turret's foot on the saddle, above the axis
cap d1.302 in ± 0.025 in 33.1 mmCorroboratedPhoto: Primary Arms, SLx 1-6x24 Second Focal Plane Optic Manual, the sheet numbered 4: the scope from above, 700 x 174 px
Photo 1.319 in ± 0.02 in
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg (the Aurora 5.56 yard sibling: the same body), right side: the elevation turret, harvested
Scale: scale from primary-arms-slx-1-6x24-gen-iv.tube_od = 1.1811 in, the tube's own width column by column: 216.7 px over columns 760–980, 216.8 px over columns 990–1210, 216.4 px over columns 1505–1760, 215.5 px over columns 1770–2035; a line through them (rms 0.27 px) changes -0.6% from column 760 to 2035, so the photo is yawed and one scale would not do. Heights by each column's width; lengths by (u − 1100)/width, the lens's axis taken to meet the image at column 1100; 183.4 px/in there. The axis is the tube's centre line (tilt -0.19°, rms 0.08 px). Lengths then scaled by 1.0140 so that the end faces are primary-arms-slx-1-6x24-gen-iv.length = 10.4 in apart: at the tube's scale they read 10.256 (-1.4%; the yaw's cosine and where the lens's axis meets the image are in that). Each face is taken behind its rim's arc: the front end's rim sags 0.106 in over radius 0.588 (rms 0.001), the rear end's rim sags 0.190 in over radius 0.855 (rms 0.002). Read by width of the traced outline (tools/trace.py); the elevation cap across its lugs' tops (along the scope; the photo's lengths are 1.4% longer than its tube's scale has them, which is in this)
Photo 1.302 in ± 0.025 in used
Primary Arms, SLx 1-6x24 Second Focal Plane Optic Manual, the sheet numbered 4: the scope from above, 700 x 174 px, harvested
Scale: the traced plan outline's own (profiles.plan): the 30 mm tube column by column; its two published sizes agree to 0.02% in that photo. Read by the windage cap in profile, across its lugs' tops along the scope: 5.987 to 7.289 in
A round cap is as wide as it is across, and the side photo's lengths along the scope are 1.4% longer than its tube's scale has them: at the tube's scale the side view reads 1.301. The plan photo, whose length and tube agree, reads the same cap 1.302.
Turret saddle's middle ahead of the eyepiece's rear face (where the turrets' axes cross the optical axis)6.604 in ± 0.02 in 167.7 mmCorroboratedPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg, the Aurora 5.56 yard sibling: the same body; right side, 2200 x 1467
Photo 6.604 in ± 0.02 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg, the Aurora 5.56 yard sibling: the same body; right side, 2200 x 1467, harvested
Scale: the traced outline's own: the 30 mm tube column by column, lengths to the published 10.4 in (profiles.turret). Read by the middle of the elevation turret's traced outline, 5.944 to 7.263 in ahead of the eyepiece's rear face: a cap turned about its own upright axis
Photo 6.613 in ± 0.02 in
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg, the Aurora 5.56 yard sibling: the same body; left side, 2200 x 1467, harvested
Scale: the left side's own trace, mirrored: the 30 mm tube column by column, lengths to the published 10.4 in. Read by the middle of the elevation turret's outline on the left side, 5.953 to 7.273 in
The right side is the photo the outlines are traced from; the left side, mirrored, agrees within 0.01 in.
Turret saddle, the ball's radius (about the turrets' station on the optical axis)0.947 in ± 0.02 in 24 mmCorroboratedWorked out: sqrt(({.tube_front_from} - {.tube_rear_to}) * ({.tube_front_from} - {.tube_rear_to}) / 4 + {.tube_od} * {.tube_od} / 4)
Worked out 0.9468 in ± 0.02 in used
sqrt(({.tube_front_from} - {.tube_rear_to}) * ({.tube_front_from} - {.tube_rear_to}) / 4 + {.tube_od} * {.tube_od} / 4), harvested
The saddle is drawn as a ball about the turrets' station with a flat under each turret and one beneath, the tube running through it. The side outline meets the tube 0.74 in either side of the station, where a ball of this radius has the tube's radius; 0.61 in from the station its underside reads 0.72 in from the axis, where this ball has 0.723; and in the oblique photos (a7dbed155cd5, 58d97f74fa18) the saddle between two turrets is round. No photo is square to it between the turrets: the radius rests on the side view alone.
Overall width (across the windage turret's cap and the illumination knob's battery cap)2.621 in ± 0.04 in 66.6 mmProvisionalWorked out: {.windage_reach} + {.illumination_reach}
Worked out 2.621 in ± 0.04 in used
{.windage_reach} + {.illumination_reach}, harvested
No page states a width. The two side knobs don't stand out alike: the windage cap is the elevation cap again, 1.23 in out, and the illumination knob is a taller stack with the battery under its cap.
Magnification ring, the places for a lug round each of its two rows (the throw lever's dovetail stands in the one on top)18ProvisionalPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg, the Aurora 5.56 yard sibling: the same body; right side, 2200 x 1467) and a copy on file (Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg, the Aurora 5.56 yard sibling: the same body; left side, 2200 x 1467
Photo 18 count used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg, the Aurora 5.56 yard sibling: the same body; right side, 2200 x 1467) and a copy on file (Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg, the Aurora 5.56 yard sibling: the same body; left side, 2200 x 1467, harvested
Scale: the ring's own silhouette radius in each photo (166.5 and 170.5 px), about the tube's axis. Read by each side view shows half the turn. The ring's surface unrolled about the axis (rows to angles by the silhouette's radius, with the near side's enlargement for a lens 25 in off taken out: the end faces' rims show as arcs 12.7 and 10.4 degrees off square, and a ring 0.91 in in radius is 3.6% large at its middle from there), and the strength of its edges along the turn, over 136 degrees of it, set against itself: the lugs' edges repeat every 19.8 and 19.5 degrees in the right view's rear and front rows and every 19.8 and 19.6 in the left's (autocorrelation 0.37 to 0.48 at the peak; 0.32 to 0.46 at 20.0 degrees and nothing at 21.2). With nothing taken out for the lens they repeat every 20.2 to 20.5. Eight lugs show in each row in each view, their middles by eye on the unrolled pictures 20.2 (right) and 19.9 (left) degrees apart, the right view's all 4.3 degrees below a grid of twenties (its lens stood that much above the axis's plane, as the windage cap's middle 0.09 in under the axis says too). Twenty degrees: eighteen places to the turn
Two rows of lugs along the scope, a waist between them, the lugs of one row in line with the other's. Sixteen lugs are seen in each row over the two side views; the place on top holds the lever's dovetail, and the one underneath is at the silhouette's edge in both views and is taken as a lug: a view from either end would say (none is on file). The spacing is what is measured (seventeen places would put the lugs 21.2 degrees apart, which the edges' period rules out).
Magnification ring, a lug's flat top across (round the ring)0.166 in ± 0.02 in 4.2 mmProvisionalPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg, the Aurora 5.56 yard sibling: the same body; right side, 2200 x 1467
Photo 0.166 in ± 0.02 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg, the Aurora 5.56 yard sibling: the same body; right side, 2200 x 1467, harvested
Scale: the ring's own radius at its lugs' tops (magnification_ring_r). Read by in the unrolled view a lug's flat top takes 10 to 11 degrees of the turn (-53 to -43, -12 to 0, 8 to 20 less its lower bevel): 10.5 degrees at 0.91 in
Diopter ring (the eyepiece's rear ring), the blocks round it18CorroboratedPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg, the Aurora 5.56 yard sibling: the same body; right side, 2200 x 1467
Photo 18 count used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg, the Aurora 5.56 yard sibling: the same body; right side, 2200 x 1467, harvested
Scale: the ring's own silhouette radius (159.5 px), about the tube's axis. Read by the ring's surface unrolled about the axis: the blocks' and pockets' edges fall on a grid 20 degrees apart from 60 above level to 60 below (seven edges), a block and a pocket to each 20 degrees: nine to the half turn seen. The strength of the ring's edges along the turn set against itself: they repeat every 19.3 to 19.4 degrees with the near side's enlargement for a lens 25 in off taken out, 19.9 to 20.0 with nothing taken out (autocorrelation 0.43 to 0.52; 0.08 to 0.21 at 21.2 degrees)
Photo 18 count
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg, the Aurora 5.56 yard sibling: the same body; left side, 2200 x 1467, harvested
Scale: the ring's own silhouette radius (161.5 px), about the tube's axis. Read by the other half of the turn, the same way: the edges repeat every 19.7 to 19.8 degrees with the lens's nearness taken out, 20.3 to 20.4 with nothing taken out (autocorrelation 0.50 to 0.55; 0.15 to 0.35 at 21.2 degrees)
The two side views, each half the turn, give the same spacing: eighteen to the turn.
A block and a pocket by turns round the ring. Half the turn is seen; no view from the rear is on file.
Turret caps (elevation and windage: the same cap), the lugs round each of its two rows18ProvisionalPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg, the Aurora 5.56 yard sibling: the same body; right side, 2200 x 1467
Photo 18 count used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg, the Aurora 5.56 yard sibling: the same body; right side, 2200 x 1467, harvested
Scale: the 30 mm tube beside it: 183.4 px/in in the axis's plane (the trace's own scale). Read by the windage cap seen face-on, unwrapped about its centre (column 1368, row 786; 1440 samples a turn): at every radius from 101 to 110 px the pattern round it is carried by the eighteenth harmonic (amplitude 14 to 20 grey levels against under 2 elsewhere): eighteen scallops between eighteen lugs
Illumination knob, the lugs round its battery cap's rim18ProvisionalPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg, the Aurora 5.56 yard sibling: the same body; left side, 2200 x 1467
Photo 18 count used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg, the Aurora 5.56 yard sibling: the same body; left side, 2200 x 1467, harvested
Scale: the 30 mm tube beside it: 188.8 px/in in the axis's plane (the trace's own scale). Read by the knob seen face-on, unwrapped about its centre (column 809, row 759): from 104 to 113 px the pattern round it is carried by the eighteenth harmonic (amplitude 9 to 13 grey levels): eighteen
Turret caps, the round medallion in the middle of the top face (the PA mark)0.6 in ± 0.04 in 15.2 mmCorroboratedPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg, the Aurora 5.56 yard sibling: the same body; right side, 2200 x 1467
Photo 0.6 in ± 0.04 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg, the Aurora 5.56 yard sibling: the same body; right side, 2200 x 1467, harvested
Scale: the 30 mm tube beside it: 183.4 px/in in the axis's plane (the trace's own scale); the cap's face stands 1.23 in nearer a lens 25 in off, so it shows 5% large: 192.7 px/in. Read by the mean brightness round the windage cap's centre steps at 56 to 59 px from it, the medallion's edge: 58 px
Photo 0.64 in ± 0.06 in
Primary Arms PA-SLX-1-6X24S-NOVA-FDE_04.jpg, this scope in flat dark earth from the rear right, 2200 x 1467, harvested
Scale: the windage cap's own width across its lugs (cap_d) in the same view, along the same direction. Read by same-plane ratio: the black disc is 135 px tall where the cap's face is 275
Read square on, at a known scale; the oblique's ratio agrees within its ±.
Black on the flat dark earth scope as on the black one: the one piece that keeps its colour.
Throw lever, its fin across the scope0.3 in ± 0.06 in 7.6 mmProvisionalPhoto: Primary Arms PA-SLX-1-6X24S-NOVA-FDE_04.jpg, this scope in flat dark earth from the rear right, 2200 x 1467
Photo 0.3 in ± 0.06 in used
Primary Arms PA-SLX-1-6X24S-NOVA-FDE_04.jpg, this scope in flat dark earth from the rear right, 2200 x 1467, harvested
Scale: the fin's own height above its base in the same view, 0.74 in by the traced lever (profiles.lever). Read by same-view ratio: the fin is 55 px across where it stands 140 px tall; the view is from behind and to the right, which shows the width a little short (in the ±)
No view is square to it. From above (a7dbed155cd5) its base is a block as wide as the fin, with a pocket for two screws, on a dovetail a little wider.
Objective, the mouth's inside diameter (threaded inside)1.02 in ± 0.03 in 25.9 mmProvisionalPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_01.jpg, the sibling from the front right and steeply above, 2200 x 1467
Photo 1.02 in ± 0.03 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_01.jpg, the sibling from the front right and steeply above, 2200 x 1467, harvested
Scale: the front rim's own outside diameter, the 30 mm tube. Read by same-plane ratio on a 2x crop: the mouth's inner ellipse is 345 px along the direction its outer rim is 400: 0.86 of 1.181 in
Ocular lens diameter (the glass, as it shows in the eyepiece's rear)1.32 in ± 0.06 in 33.5 mmProvisionalPhoto: Primary Arms PA-SLX-1-6X24S-NOVA_02.jpg, this scope from the rear left, 2200 x 1467
Photo 1.32 in ± 0.06 in used
Primary Arms PA-SLX-1-6X24S-NOVA_02.jpg, this scope from the rear left, 2200 x 1467, harvested
Scale: the eyepiece's own rear rim in the same view, 740 px along its long axis, taken as 1.746 in (twice the traced eyepiece's radius). Read by same-plane ratio on a 2x crop: the glass is 560 px along the same direction, 0.757 of the rim. It sits a little way inside the rim, which shows it a percent or two small
Eyepiece, the rear rim's inside diameter1.63 in ± 0.05 in 41.4 mmProvisionalPhoto: Primary Arms PA-SLX-1-6X24S-NOVA_02.jpg, this scope from the rear left, 2200 x 1467
Photo 1.63 in ± 0.05 in used
Primary Arms PA-SLX-1-6X24S-NOVA_02.jpg, this scope from the rear left, 2200 x 1467, harvested
Scale: the eyepiece's own rear rim in the same view (as eyepiece_lens_d). Read by the rim's wall is 25 px of the 740 px rim on each side: an inside diameter 0.93 of the outside
The round plug on the saddle's lower left, its middle behind the turrets' station0.235 in ± 0.03 in 6 mmProvisionalPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg, the Aurora 5.56 yard sibling: the same body; left side, 2200 x 1467
Photo 0.235 in ± 0.03 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg, the Aurora 5.56 yard sibling: the same body; left side, 2200 x 1467, harvested
Scale: the 30 mm tube beside it: 188.8 px/in in the axis's plane (the trace's own scale); lengths at the trace's 185.9 px/in. Read by the plug's middle at column 883, by eye on a 3x crop; the turrets' station is at column 839.3 (6.613 in from the rear face)
A small round slotted plug low on the saddle's left, behind and under the illumination knob; no page says what it is. It shows in the left side view and in this scope's own rear-left view (a56a99961f90).
The round plug on the saddle's lower left, its middle below the optical axis in the side view0.694 in ± 0.03 in 17.6 mmProvisionalPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg, the Aurora 5.56 yard sibling: the same body; left side, 2200 x 1467
Photo 0.694 in ± 0.03 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg, the Aurora 5.56 yard sibling: the same body; left side, 2200 x 1467, harvested
Scale: the 30 mm tube beside it: 188.8 px/in in the axis's plane (the trace's own scale). Read by the plug's middle at row 890, by eye on a 3x crop; the axis is at row 758.9 there
On a ball of the saddle's radius that is 47 degrees below level: the plug points down and to the left.
The round plug on the saddle's lower left, its diameter0.3 in ± 0.04 in 7.6 mmProvisionalPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg, the Aurora 5.56 yard sibling: the same body; left side, 2200 x 1467
Photo 0.3 in ± 0.04 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg, the Aurora 5.56 yard sibling: the same body; left side, 2200 x 1467, harvested
Scale: the 30 mm tube beside it: 188.8 px/in in the axis's plane (the trace's own scale). Read by the plug shows 53 px tall and 68 wide with its side, by eye on a 3x crop: about 57 px across its face
Diopter ring, where its pockets begin ahead of the eyepiece's rear face0.15 in ± 0.03 in 3.8 mmProvisionalPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg, the Aurora 5.56 yard sibling: the same body; right side, 2200 x 1467
Photo 0.15 in ± 0.03 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg, the Aurora 5.56 yard sibling: the same body; right side, 2200 x 1467, harvested
Scale: the trace's own scale along the scope, 181.1 px/in. Read by the pockets' rear edges at column 154 in the unrolled view of the ring, less the near side's 35 px toward the rear, from the rear face at column 161
The ring's near side shows 0.19 in toward the rear of where it is (the rear end is seen from 12.7 degrees off square, the ring 0.855 in in radius): taken out of both readings. How deep the pockets are isn't read.
Diopter ring, where its pockets end ahead of the eyepiece's rear face0.28 in ± 0.03 in 7.1 mmProvisionalPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg, the Aurora 5.56 yard sibling: the same body; right side, 2200 x 1467
Photo 0.28 in ± 0.03 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_03.jpg, the Aurora 5.56 yard sibling: the same body; right side, 2200 x 1467, harvested
Scale: the trace's own scale along the scope, 181.1 px/in. Read by the pockets' front edges at column 177 in the unrolled view, less the near side's 35 px toward the rear
Illumination knob, the coin slot across its battery cap0.52 in ± 0.03 in 13.2 mmProvisionalPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg, the Aurora 5.56 yard sibling: the same body; left side, 2200 x 1467
Photo 0.52 in ± 0.03 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg, the Aurora 5.56 yard sibling: the same body; left side, 2200 x 1467, harvested
Scale: the 30 mm tube beside it, 188.8 px/in in the axis's plane; the cap's face stands 1.39 in nearer a lens 25 in off: 199.6 px/in. Read by the slot's ends 103 px apart on a 3x crop of the knob seen face-on
Illumination knob, the coin slot's width0.06 in ± 0.015 in 1.5 mmProvisionalPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg, the Aurora 5.56 yard sibling: the same body; left side, 2200 x 1467
Photo 0.06 in ± 0.015 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg, the Aurora 5.56 yard sibling: the same body; left side, 2200 x 1467, harvested
Scale: as illumination_slot_length: 199.6 px/in at the cap's face. Read by the slot is about 12 px across on the same crop
Illumination knob's coin slot as photographed: its angle from the scope's axis, rising toward the muzzle52° ± 4°ProvisionalPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg, the Aurora 5.56 yard sibling: the same body; left side, 2200 x 1467
Photo 52 deg ± 4 deg used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_04.jpg, the Aurora 5.56 yard sibling: the same body; left side, 2200 x 1467, harvested
Scale: the tube's axis in the same photo. Read by the slot runs 63 px along the scope and 82 px up, its upper end toward the muzzle
Where the cap was left when it was last screwed on: it turns.
Throw lever, its rear screw ahead of the eyepiece's rear face2.61 in ± 0.05 in 66.3 mmProvisionalPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_01.jpg, the sibling from the front right and steeply above, 2200 x 1467
Photo 2.61 in ± 0.05 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_01.jpg, the sibling from the front right and steeply above, 2200 x 1467, harvested
Scale: the lever's own base as traced (profiles.lever): the fin's front face at 2.495 in, the base's front end at 3.056. Read by the rear screw's head is a fifth of the way from the fin's front face to the base's front end, on a 3x crop
Two socket-head screws in a pocket in the top of the lever's base hold it to its dovetail. No view is square to them: their places are fractions of the base's length in the one view from above.
Throw lever, its front screw ahead of the eyepiece's rear face2.78 in ± 0.05 in 70.6 mmProvisionalPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_01.jpg, the sibling from the front right and steeply above, 2200 x 1467
Photo 2.78 in ± 0.05 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_01.jpg, the sibling from the front right and steeply above, 2200 x 1467, harvested
Scale: as lever_screw_rear_x. Read by the front screw's head is halfway from the fin's front face to the base's front end, on the same crop
Throw lever, a screw's head across0.11 in ± 0.02 in 2.8 mmProvisionalPhoto: Primary Arms PA-SLX-1-6X24S-AUR-5Y6_01.jpg, the sibling from the front right and steeply above, 2200 x 1467
Photo 0.11 in ± 0.02 in used
Primary Arms PA-SLX-1-6X24S-AUR-5Y6_01.jpg, the sibling from the front right and steeply above, 2200 x 1467, harvested
Scale: the lever's own width in the same view (lever_width). Read by a head is a little over a third of the base's width on the same crop
The diopter ring's pockets: how deep0.03 in ± 0.015 in 0.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows it in profile. It was a named constant in the script until 2026-10-13, 05:15, the same night the part was made; it is here so that what the page counts as assumed counts it.
Worked out 0.03 in ± 0.015 in used
An assumption for the drawing, not a reading: no view on file shows it in profile. It was a named constant in the script until 2026-10-13, 05:15, the same night the part was made; it is here so that what the page counts as assumed counts it., harvested
The illumination knob's battery cap: how deep its flutes are0.02 in ± 0.01 in 0.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows it in profile. It was a named constant in the script until 2026-10-13, 05:15, the same night the part was made; it is here so that what the page counts as assumed counts it.
Worked out 0.02 in ± 0.01 in used
An assumption for the drawing, not a reading: no view on file shows it in profile. It was a named constant in the script until 2026-10-13, 05:15, the same night the part was made; it is here so that what the page counts as assumed counts it., harvested
The battery cap's coin slot: how deep0.04 in ± 0.02 in 1 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows it in profile. It was a named constant in the script until 2026-10-13, 05:15, the same night the part was made; it is here so that what the page counts as assumed counts it.
Worked out 0.04 in ± 0.02 in used
An assumption for the drawing, not a reading: no view on file shows it in profile. It was a named constant in the script until 2026-10-13, 05:15, the same night the part was made; it is here so that what the page counts as assumed counts it., harvested
The plug on the saddle's lower left: how far it stands off the saddle0.05 in ± 0.02 in 1.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows it in profile. It was a named constant in the script until 2026-10-13, 05:15, the same night the part was made; it is here so that what the page counts as assumed counts it.
Worked out 0.05 in ± 0.02 in used
An assumption for the drawing, not a reading: no view on file shows it in profile. It was a named constant in the script until 2026-10-13, 05:15, the same night the part was made; it is here so that what the page counts as assumed counts it., harvested
The objective's glass behind the front face (the mouth is threaded and goes black)0.4 in ± 0.1 in 10.2 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows it in profile. It was a named constant in the script until 2026-10-13, 05:15, the same night the part was made; it is here so that what the page counts as assumed counts it.
Worked out 0.4 in ± 0.1 in used
An assumption for the drawing, not a reading: no view on file shows it in profile. It was a named constant in the script until 2026-10-13, 05:15, the same night the part was made; it is here so that what the page counts as assumed counts it., harvested
The eye lens ahead of the eyepiece's rear face0.25 in ± 0.08 in 6.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows it in profile. It was a named constant in the script until 2026-10-13, 05:15, the same night the part was made; it is here so that what the page counts as assumed counts it.
Worked out 0.25 in ± 0.08 in used
An assumption for the drawing, not a reading: no view on file shows it in profile. It was a named constant in the script until 2026-10-13, 05:15, the same night the part was made; it is here so that what the page counts as assumed counts it., harvested
The throw lever's screw pocket below the base's top at its front end0.03 in ± 0.015 in 0.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file shows it in profile. It was a named constant in the script until 2026-10-13, 05:15, the same night the part was made; it is here so that what the page counts as assumed counts it.
Worked out 0.03 in ± 0.015 in used
An assumption for the drawing, not a reading: no view on file shows it in profile. It was a named constant in the script until 2026-10-13, 05:15, the same night the part was made; it is here so that what the page counts as assumed counts it., harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Scope rings
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- Primary Arms $299.99 Flat Dark Earth Nov 21, 2026, in stock that day
- Primary Arms $349.99 Black Nov 21, 2026, in stock that day
- T.REX ARMS $349.99 Black Nov 21, 2026, in stock that day