Magazine
FN America PS90/P90 5.7x28mm Magazine, 50-round
FN's 50-round magazine for the P90 and the PS90, in 5.7x28mm: a long, flat, translucent box laid along the top of the rifle, its rounds lying across it in two rows and turned through the black feed tower at its rear end to face the chamber. The AR57 upper takes it the same way, on top.

- Weight
- 7 oz ± 1.7 oz Conflictworked out: {.p90_weight_loaded} - {.p90_weight_empty} - {.capacity} * {.round_weight}Its sources span 5.3 oz to 40 oz.
- Lowest price
- $36.99 at KYGUNCO, read Nov 21, 2026 (Smoke), out of stock that day
- Made for
- e. 5.7x28mm Magazine Product No: 3810110093 (50-round) Product No: 3816101050 (30-round) Product No: 3816101040 (10-round)
- Maker's number
- 3810110093
- Colour
- FN smoke (translucent)
- Drawn as
- modelled
- Maker's page
- kygunco.com
In “AR57 16 in, 5.7x28”, a build on the start page, as it is.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Overall length, from the round rear end to the front cap's face10.869 in ± 0.02 in 276.1 mmConflictWorked out: Read on a copy on file through the camera fitted to it (that upper's ledger's header; 2026-10-19 (night), a working script): the cap's front edge 14.939, as ar57-16-camera; the round rear end where it stands against the white above the latch that holds it, 1635.3 to 1635.4 px along rows 646 to 654, as the round end it is (fn-p90-50-magazine.width), the line of sight tangent to it near its rearmost point: 4.070 (4.070 to 4.071 over the five rows). ar57-16-camera's 1636 px at row 668 is at the latch's height, where the latch's dark lobe stands between the magazine and the rail block.
Photo 10.92 in ± 0.1 in
Primary Arms' photo of the AR57 16 in upper's left side with this magazine on it, 2200 px; read from the magazine owner's side, 2026-10-18, harvested
Scale: std.picatinny.slot_pitch = 0.394 in: the receiver's top rail, its slots' leading edges at x 1678 to 2057 on the silhouette's top (12 pitches, 31.6 px each): 80.2 px/in; the handguard's M-LOK slots (std.mlok.slot_pitch, 40 mm) read 80.0 px/in on the same photo. Read by the magazine's silhouette against the white above it: its rear end at x 1636 (rows 640 and 660, where the luminance rises past 200), its cap's front face at x 760 ± 4 (row 630, behind the handguard's front rail's last tooth; the 4x crop's 763): 876 px. Both ends are at the centre plane's depth (a round end, a plane face), the rail's silhouette too; ± covers 4 px at each end and 0.5% of scale
Photo 10.98 in ± 0.06 in
Primary Arms' photo of the AR57 12 in upper's right side with this magazine on it, 2200 px; read from the magazine owner's side, 2026-10-18, detail pass, harvested
Scale: std.picatinny.slot_pitch = 0.394 in: the receiver's 13-slot rail, its teeth's leading edges on the silhouette's top at x 155 to 596 (12 pitches of 36.80 px, none off the line by more than 0.65 px): 93.39 px/in; the upper's lug holes as std.ar15.pin_spacing give 92.97 (0.45% less). Read by its rear end at x 643.5 (rows 645 to 650, where the rail block's lit face meets the magazine's dark round end) and its cap's front face at x 1668.7 (rows 650 to 690, where the cap's lighter band meets the front block's darker face; at row 640 a white gap 3 px wide stands between the lug and the block's rearmost tooth, 1672 to 1674): 1025.2 px. By the pins it would be 11.03; ± covers 2 px at each end and the two scales
Photo 11.03 in ± 0.05 in
Primary Arms' photo of the AR57 12 in upper's right side with this magazine on it, 2200 px, harvested
Scale: the upper's lug holes as std.ar15.pin_spacing (takedown 254.0, 860.9; pivot 846.7, 864.6 px: 92.97 px/in), the frame the 12 in upper's model and its room are drawn in. Read by the same ends as ar57-12-photo, 643.5 and 1668.7 px: 1025.2 px; the rail's scale (93.39 px/in) reads 0.45% less. Detail pass, 2026-10-18 (the AR57 uppers' owner)
Worked out 10.87 in ± 0.03 in
Read on a copy on file through the camera fitted to its own features of known size: the cap's front edge at 763 px (rows 640 to 685, where the cap's grey meets the block's) on the cap's near side, half fn-p90-50-magazine.cap_width out, where it stands against the block (the lens's foot is behind the block, so the cap's near side covers the riser's): 14.939; the rear end's outline at 1636 px as the round end it is (a half circle in plan as wide as the magazine, the line of sight tangent to it a little nearer the lens than its rearmost point): 4.065. Batch 12 read the face through a yaw correction fitted to the seller's back-to-muzzle length (15.187: 11.08), and this session first at the riser's side (15.040: 10.94)., harvested
Worked out 10.86 in ± 0.03 in
Read on a copy on file through the camera fitted to it (that upper's ledger's header): the cap's front edge at 1669.2 px (rows 650 to 690) on its near side: 14.962; the round rear end's outline at 644.5 px (row 670): 4.100. The other side of the same receiver, from another lens 23 in off: within 0.012 of the 16 in's (ar57-16-camera). Batch 12's ar57-12-pins (11.03) is the same pixels in a pin frame of the holes' see-through middles, which reads that photo 1.5% small., harvested
Worked out 10.869 in ± 0.02 in used
Read on a copy on file through the camera fitted to it (that upper's ledger's header; 2026-10-19 (night), a working script): the cap's front edge 14.939, as ar57-16-camera; the round rear end where it stands against the white above the latch that holds it, 1635.3 to 1635.4 px along rows 646 to 654, as the round end it is (fn-p90-50-magazine.width), the line of sight tangent to it near its rearmost point: 4.070 (4.070 to 4.071 over the five rows). ar57-16-camera's 1636 px at row 668 is at the latch's height, where the latch's dark lobe stands between the magazine and the rail block., harvested
Worked out 10.88 in ± 0.02 in
Read on a copy on file through the camera fitted to it (that upper's ledger's header; 2026-10-19 (night)): the cap's front edge 14.962, as ar57-12-camera; the round rear end where it stands against the rail block's lit face above the latch, 643.6 to 643.8 px along rows 650 to 662: 4.082 (4.077 to 4.087, a little more lower down). ar57-12-camera's 644.5 px at row 670 is at the latch's height, beside the latch's lit rim., harvested
The magazine's own two ends through two cameras: its cap's front edge where it stands against the front block, and its round rear end above the latch that holds it. Since 2026-10-19 (night) the rear end isn't taken to bear on the rail block's face: both uppers' photos through their cameras have that face 0.10 in behind it, white between the two above and below the latch (the uppers' ledgers: rail_block_front_x, latch_top_y). The 16 in's, read against the white over five rows within 0.001 from a lens 43 in off; the 12 in's, from 23 in, 0.011 more. The readings of the rear end at the latch's height (ar57-16-camera, ar57-12-camera) and every pin frame's are kept. Each upper's front block face is drawn bearing on the cap (their ledgers: front_block_face_x).
ar57-12-photo and ar57-16-camera differ by 0.11 in beyond what each states it is good to.
ar57-12-photo and ar57-12-camera differ by 0.12 in beyond what each states it is good to.
ar57-12-photo and ar57-16-above-latch differ by 0.111 in beyond what each states it is good to.
ar57-12-photo and ar57-12-above-latch differ by 0.1 in beyond what each states it is good to.
ar57-12-pins and ar57-16-camera differ by 0.16 in beyond what each states it is good to.
ar57-12-pins and ar57-12-camera differ by 0.17 in beyond what each states it is good to.
ar57-12-pins and ar57-16-above-latch differ by 0.161 in beyond what each states it is good to.
ar57-12-pins and ar57-12-above-latch differ by 0.15 in beyond what each states it is good to.
No page gives it. The P90 render on Wikipedia (123b6947565b) shows 9.7 in of it ahead of the rifle's rear cover, which hides the rest: no check beyond that it is longer. Readings scaled by it on Blackstone's photos (width, tower, its drop, height, cap) were written again at 11.03 (2026-10-18, batch 12; 1% less at 10.92) at 10.86 that night (the two AR57 rooms through their photos' cameras), and at 10.869 on 2026-10-19 (the rear end read above the latch).
Body width, across (the rounds lie this way, facing left)1.949 in ± 0.06 in 49.5 mmCorroboratedPhoto: Blackstone's photo of its top face, the cap up and the tower's end down, 1280 px
Photo 1.949 in ± 0.06 in used
Blackstone's photo of its top face, the cap up and the tower's end down, 1280 px, harvested
Scale: fn-p90-50-magazine.length = 10.869 in over the silhouette's 1233 px (rows 24 to 1257, the cap's face to the round end): 113.44 px/in (111.8 at 11.03, 112.9 at 10.92 and 113.5 at 10.86 before). Read by the silhouette's width (luminance < 240) on rows 100 to 1020: 218 to 224 px, growing toward the tower end (nearer the lens), 221 at mid-length; ± covers that spread and a view a few degrees off square (its side face then adds to the width)
Photo 1.924 in ± 0.08 in
Blackstone's side view of the magazine alone, 500 px, the tower down at the left, harvested
Scale: fn-p90-50-magazine.length = 10.869 in over the silhouette's 435 px (x 32 to 467): 40.02 px/in (39.44 at 11.03, 39.8 at 10.92 and 40.06 at 10.86 before). Read by twice the distance from the rear end (x 32) to the middle of the tower's bottom silhouette (x 33.5 to 108.5): 38.5 px; the tower is concentric with the round end in US 4,905,394's FIG. 3 and FIG. 4 and in every photo from below
A width read across the face itself; the other is a length along the side doubled, on the assumption that the tower is concentric with the round end. They agree within 0.03 in; the patent's plan (FIG. 3, 5.55 lengths to the width) gives 1.96 at this length.
Body height (its thickness, top face to underside)0.77 in ± 0.04 in 19.6 mmConflictPhoto: Primary Arms' photo of the AR57 16 in upper's left side with this magazine on it, 2200 px
Photo 0.77 in ± 0.04 in used
Primary Arms' photo of the AR57 16 in upper's left side with this magazine on it, 2200 px, harvested
Scale: std.picatinny.slot_pitch: 80.2 px/in, as fn-p90-50-magazine.length. Read by on columns 830, 1000 and 1200: its top silhouette at row 636.5 (the white above turns dark), its underside at row 698.5 (at x 830 a white gap under it begins there): 62 px. A camera a degree off level would add the top or the bottom face's 1.96 in times its sine (0.03 in a degree): the ± covers about one
Photo 0.73 in ± 0.04 in
Blackstone's side view of the magazine alone, 500 px, taken from above: its top face shows as a band, harvested
Scale: fn-p90-50-magazine.length = 10.869 in over 435 px: 40.02 px/in (39.44 at 11.03, 39.8 at 10.92 and 40.06 at 10.86 before). Read by on columns 150, 250, 350 and 420: the top face's band 25.5 px (rows 216 to 241.5) and the side face's 27.5 px (241.5 to 269); the top face's band over fn-p90-50-magazine.width says the view is 19.1 degrees from above, and the side's band over its cosine is the height
Photo 0.87 in ± 0.05 in
Wikipedia's render of the P90 with no background, 960 px, the magazine seated, harvested
Scale: the rifle's overall length, 19.88 in (FNH USA's 2009 catalog, every P90: a copy on file) over the alpha silhouette's 830 px (x 60 to 889): 41.75 px/in. Read by the magazine's side between the frame's top (row 168) and the light line under it (row 204.5), on columns 260 to 590: 36.5 px
Not adopted: a render whose scale is the rifle's length to whatever the render's muzzle device is, and 0.1 in over both photos of the magazine itself.
A photo of this magazine scaled by two standards in the same photo (the rail's and the M-LOK slots' pitches agree within 0.3%), read square from the side. Blackstone's photo of it alone, read through the angle it is taken from, agrees within the two readings' ±; Wikipedia's P90 render reads 0.1 in more and is kept beside them. Two rows of 5.7x28 cases stacked staggered (the patent's FIG. 7) need 0.58 in inside: either photo's figure leaves walls of about 0.08.
ar57-photo and p90-render differ by 0.1 in beyond what each states it is good to.
side-photo and p90-render differ by 0.14 in beyond what each states it is good to.
Feed tower's diameter (the black cap on the underside at the rear end, that the rounds turn through)1.873 in ± 0.08 in 47.6 mmProvisionalPhoto: Blackstone's side view of the magazine alone, 500 px
Photo 1.873 in ± 0.08 in used
Blackstone's side view of the magazine alone, 500 px, harvested
Scale: fn-p90-50-magazine.length = 10.869 in over 435 px: 40.02 px/in (39.44 at 11.03, 39.8 at 10.92 and 40.06 at 10.86 before). Read by the tower's bottom silhouette below the body's underside from x 33.5 to 108.5 (75 px): seen from 19 degrees above, a level circle's ends along the axis are its diameter
The side view of the magazine alone, where its length along the magazine is read square, has it 1.90, its rear at the body's rear end within a pixel (column 34 against the body's 33 at row 267), as US 4,905,394's FIG. 7 draws the feed housing flush with the magazine's rear end and FIG. 3 its circle on the round end's. The views that look at its face have it wider than the body beside it (Blackstone's top view 0db3af782b2b: it shows past the body's right side by 30 px over 110 px of its length; from below, 128e601bf5c7, 785f74cccd90, ed67cb0af658, a fifth wider at a glance): each is a close view whose lens stands nearer the tower's face than the body's edges it is compared with (0.48 to 1.25 in nearer, a tenth of a close lens's distance), or a few degrees off square (0db3af782b2b, whose tower is 1.25 in under the face it was read beside); none is a reading of its size. On the AR57 it shows through a notch in the receiver's near wall 1.52 long (the upper's feed_notch_length): the chord its round pocket cuts in that wall, not the tower; the upper's pocket is this figure and a clearance (its feed_pocket_d). Both kept: this one the tower's, that one the wall's.
Feed tower: how far its bottom face stands below the body's underside0.473 in ± 0.05 in 12 mmCorroboratedPhoto: Blackstone's side view of the magazine alone, 500 px, 19.1 degrees from above
Photo 0.473 in ± 0.05 in used
Blackstone's side view of the magazine alone, 500 px, 19.1 degrees from above, harvested
Scale: fn-p90-50-magazine.length = 10.869 in over 435 px: 40.02 px/in (39.44 at 11.03, 39.8 at 10.92 and 40.06 at 10.86 before). Read by its lowest silhouette at row 286 (x 68 to 78), the body's at 268.5 there: 17.5 px, 0.44 in on the image; seen from above, each silhouette is its near lower edge, the tower's 0.04 in nearer the middle than the body's, so 0.44 = drop × cos 19.1° − 0.01: 0.48
Photo 0.52 in ± 0.05 in
Primary Arms' photo of the AR57 16 in upper's left side, 2200 px, harvested
Scale: std.picatinny.slot_pitch: 80.2 px/in. Read by a round piece under the magazine's rear end, x 1499 to 1616, from its underside (row 698.5) to the receiver's top (row 740): 41.5 px
Not adopted: what shows there is the tower through a notch in the receiver's near wall 1.46 in across (the upper's owner reads it 1.52, feed_pocket_d), its bottom at the notch's floor or under the receiver's top: the depth to the receiver is the upper's to read.
Photo 0.55 in ± 0.06 in
a close view of an AR57's right side with this magazine seated and loaded, 700 px, harvested
Scale: fn-p90-50-magazine.height = 0.77 in over the body's 95 px there (its top at row 43, its underside at row 138). Read by the tower from the body's underside to its own bottom face in the receiver's stepped pocket, rows 138 to 207: 0.72 of the body's height; ± for a close photo (the receiver's notch is nearer the lens than the body's middle)
A third reading, of the tower in its pocket: within the two others' ± of the side view's 0.48.
The magazine alone, where nothing else can be taken for its tower; on the AR57 it shows only through the receiver's notch.
Front cap: its length along the magazine (its face to its rear edge on the side)0.45 in ± 0.06 in 11.4 mmProvisionalPhoto: Primary Arms' photo of the AR57 16 in upper's left side, 2200 px
Photo 0.45 in ± 0.06 in used
Primary Arms' photo of the AR57 16 in upper's left side, 2200 px, harvested
Scale: std.picatinny.slot_pitch: 80.2 px/in. Read by on the 4x crop of x 640 to 900: the cap's face at x 760, its rear edge on the side (a vertical line where the smoke body's window begins) at x 796: 36 px
Front cap: how far its top (its latch lugs) stands above the body's top0.17 in ± 0.03 in 4.3 mmProvisionalPhoto: Primary Arms' photo of the AR57 16 in upper's left side, 2200 px
Photo 0.17 in ± 0.03 in used
Primary Arms' photo of the AR57 16 in upper's left side, 2200 px, harvested
Scale: std.picatinny.slot_pitch: 80.2 px/in. Read by the silhouette's top at row 623 from x 785 to 808 (the lugs) and 625 ahead of them, the body's top at 636.5: 13.5 px
Front cap: how far it reaches below the body's underside0.22 in ± 0.04 in 5.6 mmProvisionalPhoto: Primary Arms' photo of the AR57 16 in upper's left side, 2200 px
Photo 0.22 in ± 0.04 in used
Primary Arms' photo of the AR57 16 in upper's left side, 2200 px, harvested
Scale: std.picatinny.slot_pitch: 80.2 px/in. Read by on the 4x crop: the cap's lower end at row 716, against the white gap under the body (rows 699 to 716 at x 830); the body's underside at 698.5: 17.5 px
Front cap: its latch lugs' reach back from the cap's face, on its top0.6 in ± 0.06 in 15.2 mmProvisionalPhoto: Primary Arms' photo of the AR57 16 in upper's left side, 2200 px
Photo 0.6 in ± 0.06 in used
Primary Arms' photo of the AR57 16 in upper's left side, 2200 px, harvested
Scale: std.picatinny.slot_pitch: 80.2 px/in. Read by the silhouette's top stays above the body's from the cap's face (x 760) to x 808: 48 px
Front cap: its width across2.04 in ± 0.06 in 51.8 mmProvisionalPhoto: Blackstone's photo of its top face, 1280 px
Photo 2.04 in ± 0.06 in used
Blackstone's photo of its top face, 1280 px, harvested
Scale: fn-p90-50-magazine.length = 10.869 in over 1233 px: 113.44 px/in (111.8 at 11.03, 112.9 at 10.92 and 113.5 at 10.86 before). Read by the silhouette's width on row 60 (the cap): 231 px, 10 px more than the body's below it
Front cap: each of its two latch lugs' width across (one at each side, a gap between)0.5 in ± 0.15 in 12.7 mmProvisionalWorked out: An assumption for the drawing, not a reading: Blackstone's photo of the top face (0db3af782b2b) shows the two lugs at the cap's two sides with a gap between, about a quarter of the cap's width each; no view squares them.
Worked out 0.5 in ± 0.15 in used
An assumption for the drawing, not a reading: Blackstone's photo of the top face (0db3af782b2b) shows the two lugs at the cap's two sides with a gap between, about a quarter of the cap's width each; no view squares them., harvested
Front cap: the slope of its feet's backs (where the cap's band, under the underside, rises back toward the rib behind it), from the underside's plane48° ± 10°ProvisionalPhoto: Primary Arms' photo of the AR57 16 in upper's left side, 2200 px; detail pass, 2026-10-18
Photo 48 deg ± 10 deg used
Primary Arms' photo of the AR57 16 in upper's left side, 2200 px; detail pass, 2026-10-18, harvested
Scale: the photo's own pixels both ways (an angle). Read by the silhouette's lower edge against the light under the magazine's front end, column by column: at row 714.5 to 715.5 from the cap's face back to x 797, then 713.5, 711.5, 710.5, 709.5 and 704.5 at x 798 to 806, where the rib's foot begins: 10 px up over 9 px back; ± for a pixel at each end
The rib across the underside behind the front cap: its front edge's distance behind the cap's face0.55 in ± 0.04 in 14 mmProvisionalPhoto: Primary Arms' photo of the AR57 16 in upper's left side, 2200 px; detail pass, 2026-10-18
Photo 0.55 in ± 0.04 in used
Primary Arms' photo of the AR57 16 in upper's left side, 2200 px; detail pass, 2026-10-18, harvested
Scale: std.picatinny.slot_pitch: 80.2 px/in, as fn-p90-50-magazine.length. Read by the silhouette's lower edge under the front end (light under it to the handguard's top at row 717.5): the cap's foot ramps up to the rib's level at x 806, the cap's face at x 762 (rows 650 to 690): 44 px
A rounded bar across the underside right behind the cap, its ends rounded: Midwest Gun Works' view of the underside (128e601bf5c7) and Wikimedia's FNP90MAG02 (785f74cccd90, its full-size copy 79ffb375bc2f) show it across the face; the AR57 photo shows it from the side as a bump under the front end, clear of the handguard's top.
The rib across the underside: its width along the magazine0.25 in ± 0.04 in 6.3 mmProvisionalPhoto: Primary Arms' photo of the AR57 16 in upper's left side, 2200 px; detail pass, 2026-10-18
Photo 0.25 in ± 0.04 in used
Primary Arms' photo of the AR57 16 in upper's left side, 2200 px; detail pass, 2026-10-18, harvested
Scale: std.picatinny.slot_pitch: 80.2 px/in. Read by its foot under the body from x 806 to x 826, where the silhouette's lower edge is back at the underside (row 698.5 from x 828): 20 px
The rib across the underside: how far it stands below the underside0.08 in ± 0.02 in 2 mmProvisionalPhoto: Primary Arms' photo of the AR57 16 in upper's left side, 2200 px; detail pass, 2026-10-18
Photo 0.08 in ± 0.02 in used
Primary Arms' photo of the AR57 16 in upper's left side, 2200 px; detail pass, 2026-10-18, harvested
Scale: std.picatinny.slot_pitch: 80.2 px/in. Read by the silhouette's lower edge at rows 704.5 to 705.5 from x 806 to 818, the underside's at 698.5 (x 828 to 844, the light under it from row 699 to the handguard at 717.5): 6.5 px
The rib across the underside: its length across the magazine, end to rounded end1.5 in ± 0.15 in 38.1 mmProvisionalWorked out: An assumption for the drawing, not a reading: on the two views of the underside that show the rib whole, both oblique (79ffb375bc2f from below and ahead, 128e601bf5c7 from above at an angle), it runs about three quarters of the face's width at a glance (0.76 and 0.8), its ends well inside the long edges; no view squares it.
Worked out 1.5 in ± 0.15 in used
An assumption for the drawing, not a reading: on the two views of the underside that show the rib whole, both oblique (79ffb375bc2f from below and ahead, 128e601bf5c7 from above at an angle), it runs about three quarters of the face's width at a glance (0.76 and 0.8), its ends well inside the long edges; no view squares it., harvested
Front cap: the frame round the recessed panel in each of its sides (at the panel's front and over it)0.07 in ± 0.03 in 1.8 mmProvisionalPhoto: Primary Arms' photo of the AR57 16 in upper's left side, 2200 px; detail pass, 2026-10-18
Photo 0.07 in ± 0.03 in used
Primary Arms' photo of the AR57 16 in upper's left side, 2200 px; detail pass, 2026-10-18, harvested
Scale: std.picatinny.slot_pitch: 80.2 px/in. Read by on a 10x crop of x 735 to 805: the cap's side is a frame round a flat panel, lit along the frame's inner edge; the frame from the cap's face (764) to the panel (771) is 7 px, and over the panel (rows 636.5 to 641) 4.5 px: 0.09 and 0.056; under it the panel runs down to the underside
Front cap: how deep the panel in each of its sides is recessed0.02 in ± 0.01 in 0.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: the AR57 photo (054c636f9e79) shows the panel square on, its frame's inner edge lit, and no view has it in profile; the cap stands only 0.045 in proud of the body's side (cap_width less width, halved), so the recess is drawn less than that.
Worked out 0.02 in ± 0.01 in used
An assumption for the drawing, not a reading: the AR57 photo (054c636f9e79) shows the panel square on, its frame's inner edge lit, and no view has it in profile; the cap stands only 0.045 in proud of the body's side (cap_width less width, halved), so the recess is drawn less than that., harvested
The raised ring on the underside just ahead of the feed tower: its outside diameter0.45 in ± 0.07 in 11.4 mmProvisionalWorked out: An assumption for the drawing, not a reading: in the two close views from below that show it beside the tower's face (ed67cb0af658, 128e601bf5c7) it is about a quarter of the tower's diameter across at a glance (0.235 and 0.27 of it), nearly touching the tower's edge, between the two index lines down the face and near the middle of them (also 79ffb375bc2f); no view squares it.
Worked out 0.45 in ± 0.07 in used
An assumption for the drawing, not a reading: in the two close views from below that show it beside the tower's face (ed67cb0af658, 128e601bf5c7) it is about a quarter of the tower's diameter across at a glance (0.235 and 0.27 of it), nearly touching the tower's edge, between the two index lines down the face and near the middle of them (also 79ffb375bc2f); no view squares it., harvested
The raised ring on the underside: its bore's diameter0.3 in ± 0.06 in 7.6 mmProvisionalWorked out: An assumption for the drawing, not a reading: the bore is about two thirds of the ring across in ed67cb0af658 and 79ffb375bc2f (0.68 and 0.74), a floor lit inside it.
Worked out 0.3 in ± 0.06 in used
An assumption for the drawing, not a reading: the bore is about two thirds of the ring across in ed67cb0af658 and 79ffb375bc2f (0.68 and 0.74), a floor lit inside it., harvested
The raised ring on the underside: how far it stands proud of the face0.03 in ± 0.02 in 0.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: the close views show its outer wall as a narrow band below its flat top (ed67cb0af658, 9516509da8f4); no view has it in profile.
Worked out 0.03 in ± 0.02 in used
An assumption for the drawing, not a reading: the close views show its outer wall as a narrow band below its flat top (ed67cb0af658, 9516509da8f4); no view has it in profile., harvested
The raised ring on the underside: how deep its bore goes below its top0.1 in ± 0.05 in 2.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: its floor shows lit inside the bore in ed67cb0af658, a little below the face at a glance; the model is a solid body, so the bore stops there.
Worked out 0.1 in ± 0.05 in used
An assumption for the drawing, not a reading: its floor shows lit inside the bore in ed67cb0af658, a little below the face at a glance; the model is a solid body, so the bore stops there., harvested
The body's long edges, their round0.15 in ± 0.05 in 3.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: US 4,905,394's section through the feed end (sheet 2, FIG. 8) rounds its four outer corners by about an eighth of its width at a glance, and the photos from the side and the ends show the same soft edges; no view of the product has a corner in profile.
Worked out 0.15 in ± 0.05 in used
An assumption for the drawing, not a reading: US 4,905,394's section through the feed end (sheet 2, FIG. 8) rounds its four outer corners by about an eighth of its width at a glance, and the photos from the side and the ends show the same soft edges; no view of the product has a corner in profile., harvested
Feed tower's bottom face: the bar the round lies in (its two lips), its width across0.72 in ± 0.12 in 18.3 mmProvisionalWorked out: An assumption for the drawing, not a reading: on the photos from below (785f74cccd90, ed67cb0af658, 128e601bf5c7) the two lips with the slot between them are about two and a half of the case's widths across at a glance; no view squares the bar.
Worked out 0.72 in ± 0.12 in used
An assumption for the drawing, not a reading: on the photos from below (785f74cccd90, ed67cb0af658, 128e601bf5c7) the two lips with the slot between them are about two and a half of the case's widths across at a glance; no view squares the bar., harvested
Feed tower's bottom face: the slot along the bar that the top round lies in, its width0.313 in ± 0.02 in 8 mmProvisionalWorked out: {.cartridge_base_d}
Worked out 0.313 in ± 0.02 in used
{.cartridge_base_d}
As wide as the case that lies in it (785f74cccd90, ed67cb0af658): the slot is that case's width on every photo of it loaded.
Feed tower's bottom face: the two D-shaped pockets either side of the bar, their depth0.12 in ± 0.05 in 3 mmProvisionalWorked out: An assumption for the drawing, not a reading: the photos from below (785f74cccd90, ed67cb0af658, 128e601bf5c7) show the two pockets' walls lit and their floors dark, about a sixth of the tower's drop; no view has them in profile.
Worked out 0.12 in ± 0.05 in used
An assumption for the drawing, not a reading: the photos from below (785f74cccd90, ed67cb0af658, 128e601bf5c7) show the two pockets' walls lit and their floors dark, about a sixth of the tower's drop; no view has them in profile., harvested
Feed tower's bottom face: the rim round its two pockets, its width0.12 in ± 0.05 in 3 mmProvisionalWorked out: An assumption for the drawing, not a reading: the photos from below (785f74cccd90, ed67cb0af658, 128e601bf5c7) show a rim round the face about a sixteenth of its diameter wide at a glance; no view squares it.
Worked out 0.12 in ± 0.05 in used
An assumption for the drawing, not a reading: the photos from below (785f74cccd90, ed67cb0af658, 128e601bf5c7) show a rim round the face about a sixteenth of its diameter wide at a glance; no view squares it., harvested
A 5.7x28 case's base diameter (what lies in the feed slot)0.313 in ± 0.0002 in 7.9 mmProvisionalPublished: Wikipedia, FN 5.7×28mm (its specifications, citing the C.I.P. data sheet), a review, read Oct 18, 2026
Published “Base diameter 7.95 mm (0.313 in)” used
Wikipedia, FN 5.7×28mm (its specifications, citing the C.I.P. data sheet), a review, read Oct 18, 2026 the page, harvested Oct 18, 2026
A 5.7x28 round's overall length (the rounds lie across the body)1.594 in ± 0.0002 in 40.5 mmProvisionalPublished: Wikipedia, FN 5.7×28mm (its specifications, citing the C.I.P. data sheet), a review, read Oct 18, 2026
Published “Overall length 40.50 mm (1.594 in)” used
Wikipedia, FN 5.7×28mm (its specifications, citing the C.I.P. data sheet), a review, read Oct 18, 2026 the page, harvested Oct 18, 2026
A check on the width: 1.594 in of round lie across 1.98 in of body (Wikipedia's P90: "it contains 50 rounds of ammunition which lie in two rows facing left, offset 90° from the bore axis"), leaving 0.18 in for each wall and the room the rounds move in.
Capacity50ConfirmedPublished: FNH USA, 2009 catalog, PS90/P90 accessories (archived copy), the maker, read Oct 18, 2026
Published “e. 5.7x28mm Magazine Product No: 3810110093 (50-round)” used
FNH USA, 2009 catalog, PS90/P90 accessories (archived copy), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
One 5.7x28 round's weight0.21 oz ± 0.0018 ozProvisionalPublished: Wikipedia, FN 5.7×28mm, a review, read Oct 18, 2026
Published “The 5.7×28mm cartridge weighs 6.0 grams (93 grains)” used
Wikipedia, FN 5.7×28mm, a review, read Oct 18, 2026 the page, harvested Oct 18, 2026
Of no load in particular (FN's SS190 as Wikipedia gives it); the loads sold differ by a few grains of bullet.
A P90's weight empty (for the magazine's weight by difference)88 oz ± 0.8 ozProvisionalPublished: Wikipedia, FN P90, a review, read Oct 18, 2026
Published “weighing 2.5 kg (5.5 lb) empty, or 3 kg (6.6 lb) with a loaded 50-round magazine” used
Wikipedia, FN P90, a review, read Oct 18, 2026 the page, harvested Oct 18, 2026
A P90's weight with a loaded 50-round magazine105.6 oz ± 0.8 ozProvisionalPublished: Wikipedia, FN P90, a review, read Oct 18, 2026
Published “weighing 2.5 kg (5.5 lb) empty, or 3 kg (6.6 lb) with a loaded 50-round magazine” used
Wikipedia, FN P90, a review, read Oct 18, 2026 the page, harvested Oct 18, 2026
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
P90 magazine, on top of the upper
Prices on file
Each seller's latest reading of its own page: before tax and shipping, and not a quote. The pages are read again every night.
- KYGUNCO $36.99 Smoke Nov 21, 2026, out of stock that day
- Midwest Gun Works $44.99 Smoke Nov 21, 2026, out of stock that day