Brace
SB Tactical SBPDW® Pistol Stabilizing Brace®
SB Tactical's three-position brace for an AR pistol, "Designed in conjunction with Maxim Defense": a polymer cuff that wraps the forearm, closed by an adjustable nylon strap, on a body that slides over its own receiver extension and two steel guide rods that run forward through a housing at the receiver. The maker: "The SBPDW brings 3-position adjustability to the AR pistol. Compatible with mil-spec bolt carrier groups and buffers". Sold only as the whole assembly with its tube (PDW-01-SB): this part is the brace of it, and the SBPDW kit brings both.

- Weight
- 9.89 oz ± 1.6 oz Provisionalworked out: {.kit_weight} - {sb-tactical-sbpdw-receiver-extension.weight}
- Lowest price
- Sold in the SB Tactical SBPDW®, not by itself
- Maker's number
- PDW-01-SB
- Colour
- Polymer black (placeholder)
- Drawn as
- modelled
- Maker's page
- sb-tactical.com
In “22RB .22 LR rifle”, a build on the start page, in place of its Magpul MOE SL carbine stock, mil-spec. The SB Tactical SBPDW receiver extension, housing and integral castle nut goes in with it: it goes on that, and the build's own doesn't take it.
Its figures
Every figure the site draws and checks it by, with where it came from. Open one for each source's reading, and why one is used where they differ.
Length collapsed (the maker's; what it is measured between isn't stated)6.75 in 171.4 mmConfirmedPublished: SB Tactical, SBPDW specification sheet (REV FEBRUARY 2022), linked from the product page as 'SBPDW Specification Sheet', the maker, read Oct 18, 2026
Published “Length: 6.75" Collapsed 9.4" Extended” used
SB Tactical, SBPDW specification sheet (REV FEBRUARY 2022), linked from the product page as 'SBPDW Specification Sheet', the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “across the brace's 3 positions, from 6.75" collapsed to 9.375" extended”
Primary Arms, SB Tactical SBPDW AR Pistol Brace (SKU SBTPDW-01-SB, MPN PDW-01-SB), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “LENGTH: 6.75 in (collapsed), 8.125 in (mid), 9.375 (extended) in”
AR15Discounts, SB Tactical SBPDW Pistol Stabilizing Brace - AR - Black (PDW-01-SB), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
The maker's sheet; two sellers state the same figure.
Every page gives 6.75 in collapsed and none says from where. The photos don't bear it out as the length behind the receiver: on the maker's photo of the pistol the brace's rear stands 7.24 in behind the receiver's rear face (rear_behind_receiver_face), and in its side photo of the assembly alone the same span reads 7.26 in by the thread's own diameter; from the castle nut's rear face it is 4.5, from the thread's front end 7.7. The model's seat is the photo's (butt_behind_pin_pos1); this figure is kept as published and used for the step between positions only (position_step on the receiver extension), where the datum falls out.
Length at the middle position (one seller's)8.125 in 206.4 mmProvisionalPublished: AR15Discounts, SB Tactical SBPDW Pistol Stabilizing Brace - AR - Black (PDW-01-SB), a seller, read Oct 18, 2026
Published “LENGTH: 6.75 in (collapsed), 8.125 in (mid), 9.375 (extended) in” used
AR15Discounts, SB Tactical SBPDW Pistol Stabilizing Brace - AR - Black (PDW-01-SB), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
1.375 in out from collapsed and 1.25 short of extended: the two steps differ by 1/8 in, which no other page says.
Length extended9.375 in 238.1 mmCorroboratedPublished: Primary Arms, SB Tactical SBPDW AR Pistol Brace (SKU SBTPDW-01-SB, MPN PDW-01-SB), a seller, read Oct 18, 2026
Published “Length: 6.75" Collapsed 9.4" Extended”
SB Tactical, SBPDW specification sheet (REV FEBRUARY 2022), linked from the product page as 'SBPDW Specification Sheet', the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “across the brace's 3 positions, from 6.75" collapsed to 9.375" extended” used
Primary Arms, SB Tactical SBPDW AR Pistol Brace (SKU SBTPDW-01-SB, MPN PDW-01-SB), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “LENGTH: 6.75 in (collapsed), 8.125 in (mid), 9.375 (extended) in”
AR15Discounts, SB Tactical SBPDW Pistol Stabilizing Brace - AR - Black (PDW-01-SB), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
9 3/8 in, which the maker's sheet rounds to 9.4 (inside half its last digit); two sellers state it in full.
Height5.02 in ± 0.04 in 127.5 mmCorroboratedPhoto: SB Tactical sbpdw-side-product_image.jpg, the assembly alone from the right, 2000 x 1500
Photo 5.02 in ± 0.04 in used
SB Tactical sbpdw-side-product_image.jpg, the assembly alone from the right, 2000 x 1500, harvested
Scale: the housing's front face (column 1556) to the cuff's rear (column 331) = rear_behind_receiver_face, 7.24 in: 169.2 px/in; the thread's top edge 99.5 px above the axis the castle nut's notches are symmetric about agrees (168.4 px/in for the standard's 1.181 in thread). Read by rows 322 (the strap's top over the cuff) to 1172 (the cuff's foot): 850 px
Photo 5.06 in ± 0.05 in
SB Tactical sbpdw-installed_2-product_image.jpg, collapsed on an AR pistol, left side, 2000 x 1500, harvested
Scale: the pivot pin's head (871.3, 707.5) to the receiver's rear face where the housing begins (column 1357): 7.5 in (std.ar15.pin_spacing + the receiver's rear face behind the takedown pin): 64.8 px/in. Read by rows 585 to 913 at the cuff (columns 1740 to 1800)
The larger photo; the installed one agrees within its ±.
No page states it. Read on the maker's side photo from the strap's top over the cuff to the cuff's foot.
Width (the cuff's widest)2.25 in 57.1 mmConfirmedPublished: SB Tactical, SBPDW specification sheet (REV FEBRUARY 2022), linked from the product page as 'SBPDW Specification Sheet', the maker, read Oct 18, 2026
Published “Width (max): 2.25"” used
SB Tactical, SBPDW specification sheet (REV FEBRUARY 2022), linked from the product page as 'SBPDW Specification Sheet', the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “WIDTH [MAX]: 2.25 in”
AR15Discounts, SB Tactical SBPDW Pistol Stabilizing Brace - AR - Black (PDW-01-SB), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
The maker's sheet; a seller states the same.
The strap's width1 in ± 0.05 in 25.4 mmConfirmedPublished: SB Tactical, SBPDW specification sheet (REV FEBRUARY 2022), linked from the product page as 'SBPDW Specification Sheet', the maker, read Oct 18, 2026
Published “Strap Width: 1"” used
SB Tactical, SBPDW specification sheet (REV FEBRUARY 2022), linked from the product page as 'SBPDW Specification Sheet', the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “STRAP WIDTH: 1 in”
AR15Discounts, SB Tactical SBPDW Pistol Stabilizing Brace - AR - Black (PDW-01-SB), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
The maker's sheet; a seller states the same.
Weight of the whole SBPDW as sold: the brace, its housing and its receiver extension18.14 ozConflictPublished: SB Tactical, SBPDW specification sheet (REV FEBRUARY 2022), linked from the product page as 'SBPDW Specification Sheet', the maker, read Oct 18, 2026
Published “Weight: 18.14oz” used
SB Tactical, SBPDW specification sheet (REV FEBRUARY 2022), linked from the product page as 'SBPDW Specification Sheet', the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Weight 19.5 oz”
SB Tactical, SBPDW® product page (Specifications tab), the maker, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Weight: 18.14 oz”
Primary Arms, SB Tactical SBPDW AR Pistol Brace (SKU SBTPDW-01-SB, MPN PDW-01-SB), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “WEIGHT: 18.14 oz”
AR15Discounts, SB Tactical SBPDW Pistol Stabilizing Brace - AR - Black (PDW-01-SB), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
Published “Additional information Weight 8.224 oz Dimensions 9.375 × 2.25 × 2.5 in”
AR15Discounts, SB Tactical SBPDW Pistol Stabilizing Brace - AR - Black (PDW-01-SB), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
The shop's shipping fields; not the product's weight.
The maker's own sheet, to the hundredth, and two sellers state the same; the page's 19.5 oz is the maker's too and is kept beside it: which is newer, or what else it counts, isn't said.
sheet and page differ by 1.36 oz beyond what each states it is good to.
sheet and ar15discounts-shop differ by 9.92 oz beyond what each states it is good to.
page and primary-arms differ by 1.36 oz beyond what each states it is good to.
page and ar15discounts differ by 1.36 oz beyond what each states it is good to.
page and ar15discounts-shop differ by 11.28 oz beyond what each states it is good to.
primary-arms and ar15discounts-shop differ by 9.92 oz beyond what each states it is good to.
ar15discounts and ar15discounts-shop differ by 9.92 oz beyond what each states it is good to.
Every figure is of the assembly. The maker's page's spec tab says 19.5 oz today; its sheet and two sellers 18.14. AR15Discounts' shop field 'Weight 8.224 oz' sits beside 'Dimensions 9.375 × 2.25 × 2.5 in', a shipping record, and is less than the aluminium of the tube and housing alone would leave for the brace.
Tube axis below the brace's top (the strap's top over the cuff)1.067 in ± 0.02 in 27.1 mmProvisionalPhoto: the assembly alone from the right
Photo 1.067 in ± 0.02 in used
the assembly alone from the right, harvested
Scale: 169.2 px/in (height). Read by the axis at row 502.5, midway between the castle nut's two notches seen on this side (rows 457 and 548, each 22.5° off the horizontal on a ring of eight); the top at row 322: 180.5 px. The thread's top edge (row 403) less the standard thread's radius puts the axis at 502.7
The brace's rear behind the receiver's rear face, collapsed on a rifle7.24 in ± 0.06 in 183.9 mmProvisionalPhoto: collapsed on an AR pistol, left side, 2000 x 1500
Photo 7.24 in ± 0.06 in used
collapsed on an AR pistol, left side, 2000 x 1500, harvested
Scale: the pivot pin's head (871.3, 707.5; the takedown pin is under the brace's rod in this view) to the receiver's rear face where the housing begins (column 1357 ± 3): 7.5 in = std.ar15.pin_spacing + 1.125 (std.ar15.receiver_rear_x): 64.8 px/in. Read by column 1357 to the brace's rearmost (column 1826): 469 px. Checks: the maker's right side view of the pistol with the brace out (b180728537b9, at its own scale, 59.3 px/in by its two pins) has the tube between the castle nut and the brace 2.65 in longer than this one, for the published 2.625 in of travel; and the side photo of the assembly alone, scaled by the thread's diameter, reads 7.26 for the same span
Where the housing's front bears on the receiver, in the end plate's place ("The end plate and castle nut are integral to the assembly").
Rear behind the takedown pin at its first position (collapsed), on its own tube8.365 in ± 0.06 in 212.5 mmProvisionalWorked out: {.rear_behind_receiver_face} - {std.ar15.receiver_rear_x}
Worked out 8.365 in ± 0.06 in used
{.rear_behind_receiver_face} - {std.ar15.receiver_rear_x}, harvested
The installed photo's reading behind the receiver's rear face, which the Army's drawing puts 1.125 in behind the takedown pin.
The guide rods' spacing, centre to centre1.175 in 29.8 mmProvisionalPublished: AR15Discounts, SB Tactical SBPDW Pistol Stabilizing Brace - AR - Black (PDW-01-SB), a seller, read Oct 18, 2026
Published “Space between rods is 1.175″” used
AR15Discounts, SB Tactical SBPDW Pistol Stabilizing Brace - AR - Black (PDW-01-SB), a seller, read Oct 18, 2026 the page, harvested Oct 18, 2026
One seller's figure: taken as centre to centre, the two rods either side of the tube's vertical plane.
A guide rod's diameter0.334 in ± 0.02 in 8.5 mmCorroboratedPhoto: Primary Arms SBTPDW-01-SB, the assembly alone from the left, 1920 x 1280
Photo 0.334 in ± 0.02 in used
Primary Arms SBTPDW-01-SB, the assembly alone from the left, 1920 x 1280, harvested
Scale: 131 px/in: the castle nut's notches seen on this side are 35 px either side of the axis (0.267 in on the nut's 1.394 in, at 22.5°); the thread's top edge then gives 1.198 in for the standard's 1.181. Read by the near rod's edges against the far rod's top (a lit line between them, rows 546 to 548) and the background (row 591): 43 px
Photo 0.373 in ± 0.03 in
the assembly alone from the right, harvested
Scale: 169.2 px/in. Read by the near rod, rows 627 to 690: its upper edge lies along the far rod with no line between them, picked where the shading changes
Both its edges are lines in the photo; the right view's upper edge is a change of shade.
The guide rods' axis below the tube's axis0.78 in ± 0.03 in 19.8 mmCorroboratedPhoto: the assembly alone from the right
Photo 0.78 in ± 0.03 in used
the assembly alone from the right, harvested
Scale: 169.2 px/in; the axis at row 502.5. Read by the near rod's centre at row 658.5, the far rod's at 610 (its top at 582 less half the rod), the middle of the two 634: 132 px
Photo 0.83 in ± 0.03 in
the assembly alone from the left, harvested
Scale: 131 px/in; the axis at row 451, midway between the castle nut's notches. Read by the near rod's centre at row 569.5, the far rod's at 539.5, the middle 554.5: 103.5 px
The photo the outline is traced from, at the larger scale; the left view's reading is inside the two ±.
The rods are level: in each side view the near rod reads lower and the far one higher, by a camera above the axis (the right view's near rod 0.92 in down, its far one 0.64; the left view's 0.95 and 0.71). The rod on the left is the near one in one view and the far one in the other, so neither stands higher; each reading here is the middle of the two.
The rods' front ends ahead of the brace's rear, collapsed on a rifle8.63 in ± 0.08 in 219.2 mmConflictPhoto: collapsed on an AR pistol, left side
Photo 8.63 in ± 0.08 in used
collapsed on an AR pistol, left side, harvested
Scale: 64.8 px/in (rear_behind_receiver_face). Read by the rod's front end at column 1267, 90 px ahead of the receiver's rear face (1.39 in), with the brace's rear 7.24 in behind it
Photo 8.92 in ± 0.03 in
the assembly alone from the right, harvested
Scale: 169.2 px/in. Read by the near rod's front end at column 1835, the brace's rear at 331
Off the rifle.
On the rifle, collapsed: the brace's first position, where the catalog draws it.
installed and right-photo differ by 0.29 in beyond what each states it is good to.
On the rifle the rods run past the housing beside the lower receiver's rear, over its takedown pin's head (the maker's photo of the pistol from the left). Off the rifle the maker's two side photos have them further forward (8.92 and 9.5 in ahead of the brace's rear): how the rods are held in the brace and the housing isn't seen.
Where the rods go into the brace's strut, ahead of its rear2.03 in ± 0.05 in 51.6 mmProvisionalPhoto: the assembly alone from the right
Photo 2.03 in ± 0.05 in used
the assembly alone from the right, harvested
Scale: 169.2 px/in. Read by the strut's front edge where the near rod meets it, column 674 (rows 640 to 700)
The bore the tube's rear runs in1.166 in ± 0.02 in 29.6 mmProvisionalWorked out: An assumption for the drawing, not a reading: the brace's body slides over its own tube (sb-tactical-sbpdw-receiver-extension.tube_od, 1.146) and no view on file shows the bore's mouth square; drawn 0.02 in over the tube.
Worked out 1.166 in ± 0.02 in used
An assumption for the drawing, not a reading: the brace's body slides over its own tube (sb-tactical-sbpdw-receiver-extension.tube_od, 1.146) and no view on file shows the bore's mouth square; drawn 0.02 in over the tube., harvested
The cuff's length along the tube (its flaps, from the rear to their front edge)1.38 in ± 0.04 in 35.1 mmProvisionalPhoto: the assembly alone from the right
Photo 1.38 in ± 0.04 in used
the assembly alone from the right, harvested
Scale: 169.2 px/in. Read by the brace's rear (column 331) to the cuff's front edge under the strap's band (column 565, rows 700 to 1100)
The brace's body round the tube, ahead of the cuff: its width1.45 in ± 0.1 in 36.8 mmProvisionalWorked out: An assumption for the drawing, not a reading: no view on file is square across it. In the two obliques from above (f1b3345f7383, 0d379b324f10) the body over the tube is about as wide as the castle nut (1.39 in) and a little wider; drawn so, with a wall of 0.14 in each side of the bore.
Worked out 1.45 in ± 0.1 in used
An assumption for the drawing, not a reading: no view on file is square across it. In the two obliques from above (f1b3345f7383, 0d379b324f10) the body over the tube is about as wide as the castle nut (1.39 in) and a little wider; drawn so, with a wall of 0.14 in each side of the bore., harvested
The strap's band round the cuff: its middle ahead of the brace's rear0.72 in ± 0.03 in 18.3 mmProvisionalPhoto: the assembly alone from the right
Photo 0.72 in ± 0.03 in used
the assembly alone from the right, harvested
Scale: 169.2 px/in. Read by the band's two edges on the cuff's side, columns 360 and 545 (rows 400 to 1100), their middle at 452.5. The band reads 1.09 in across there for the published 1 in: the cuff's side stands 1.1 in nearer the lens than the axis the scale is taken on, and the band's edges are folded
The strap's thickness over the cuff0.06 in ± 0.03 in 1.5 mmProvisionalWorked out: An assumption for the drawing, not a reading: the strap's top over the cuff stands about 12 px (0.07 in) over the cuff's own top in the side photo, which is the band's two layers where it is doubled under its buckle and one elsewhere; drawn one layer of 0.06 in all round.
Worked out 0.06 in ± 0.03 in used
An assumption for the drawing, not a reading: the strap's top over the cuff stands about 12 px (0.07 in) over the cuff's own top in the side photo, which is the band's two layers where it is doubled under its buckle and one elsewhere; drawn one layer of 0.06 in all round., harvested
What it goes with
By the way it mounts, and the figures each part on file states: a part whose figures say it doesn't fit is left out, and one whose fit can't be checked from what is published is marked. A check is against published figures, not a guarantee.
Receiver extension (buffer tube)
- Receiver extensions
- SB Tactical SBPDW receiver extension, housing and integral castle nut